31 lines
1.2 KiB
Markdown
31 lines
1.2 KiB
Markdown
i2c master mode tests.
|
|
|
|
While many of the disco boards have some form of i2c device onboard,
|
|
which would, on the face of it, make testing easy, it's a different
|
|
device on each board, and there are boards without it.
|
|
|
|
Instead, use a known I2C peripheral on all boards, and require/expect
|
|
a known fixed i2c slave device. (Eventually, this will be a soft
|
|
controllable i2c slave in the auto test setup ;)
|
|
|
|
the "trigger" pin is bounced when each iteration of the test code starts,
|
|
allowing synchronization with a sigrok script that helps assure that
|
|
results are as expected.
|
|
|
|
Debug is via SWO wherever possible, uart (tx only) on less capable cores
|
|
|
|
Pinouts: (External PullUps REQUIRED!)
|
|
|
|
board SCLK SDA i2cperiph trigger uart
|
|
f4-disco PB8 PB9 i2c1 PB13
|
|
l1-disco PB8 PB9 i2c1 PB13
|
|
f072-disco PB8 PB9 i2c1 PB12 PA9!
|
|
|
|
|
|
Notes for monitoring with sigrok:
|
|
$ sigrok-cli -d fx2lafw -C D0=SDA,D1=SCL,D2=Trig -c samplerate=4Mhz:captureratio=4 --time=150ms -t Trig=r -o cap2.cli.sr
|
|
# Then open the .sr file in pulseview. something's wrong with decoding
|
|
# directly from the cli!
|
|
|
|
# or....
|
|
$ sigrok-cli -d fx2lafw -C D0=SDA,D1=SCL,D2=Trig -c samplerate=4Mhz:captureratio=4 --time=150ms -t Trig=r -P i2c:scl=SCL:sda=SDA
|