32 lines
1.3 KiB
Markdown
32 lines
1.3 KiB
Markdown
# OtterPill
|
|
|
|
STM32F072 devboard featuring USB 2.0 full-speed, DFU Bootloader, USB-PD Phy, Arduino nano alike pinout and size.
|
|
|
|
HW v1.1 is finished and tested, v1.2 will be finished and tested soon. New features/changelog: BOM cost reduction by ~40%, PCB can be fully populated by JLCSMT, more efficient buck converter (PCB gets less warm at 20V), GND-hook for probing, Reset-Pin will be exposed as pad, power pads for 20V/5A
|
|
|
|
More documentation and firmware examples will be aviable soon (including pinout diagram).
|
|
|
|
## Building and Flashing
|
|
### Via Arduino
|
|
|
|
[You can build and flash the firmware via Arduino as described here.](https://github.com/stm32duino/Arduino_Core_STM32)
|
|
|
|
## Via Makefile and DFU
|
|
|
|
Or you can generate a basic firmware, with HAL init and Makefile, with CubeMX. The binary can then be build with make and flashed with dfu-utils. To enter DFU mode, press and hold the Button while plugging in power.
|
|
|
|
$ make
|
|
$ dfu-util -a 0 -s 0x08000000:leave -D build/firmware.bin
|
|
|
|
## USB-PD example firmware
|
|
|
|
This is a working USB-PD example using ChibiOS, a new voltage can be requested by pressing the Button.
|
|
|
|
[https://github.com/Jan--Henrik/USB-PD-Firmware](https://github.com/Jan--Henrik/USB-PD-Firmware)
|
|
|
|
## Images
|
|
|
|
|
|
|
|
|
|
|