.gitignore

@@ -3,5 +3,3 @@ gerbonara_test_failures
 __pycache__
 .tox
 docs/_build/
-build
-dist

.gitlab-ci.yml

@@ -14,7 +14,8 @@ build:archlinux:
     GIT_SUBMODULE_STRATEGY: none
   script:
     - git config --global --add safe.directory "$CI_PROJECT_DIR"
-    - uv build
+    - pip3 install --user --break-system-packages wheel setuptools
+    - python3 setup.py sdist bdist_wheel
   artifacts:
     name: "gerbolyze-$CI_COMMIT_REF_NAME-gerbonara"
     paths:

docs/cli.rst

@@ -60,7 +60,6 @@ layers, or whole board stacks (:py:class:`~.layers.LayerStack`) to SVG.
 
 ``gerbonara render`` renders one or more Gerber or Excellon files as a single SVG file. It can read single files,
 directorys of files, and ZIP files. To read directories or zips, it applies gerbonara's layer filename matching rules.
-These built-in rules should work with common settings in a wide variety of CAD tools.
 
 .. option:: --warnings [default|ignore|once]
 

docs/index.rst

@@ -71,7 +71,7 @@ Then, you are ready to read and write gerber files:
 
     from gerbonara import LayerStack
 
-    stack = LayerStack.open('output/gerber')
+    stack = LayerStack.from_directory('output/gerber')
     w, h = stack.outline.size('mm')
     print(f'Board size is {w:.1f} mm x {h:.1f} mm')
 

examples/highlight_outline.py

@@ -10,7 +10,7 @@ from gerbonara.utils import MM
 from gerbonara.utils import rotate_point
 
 def highlight_outline(input_dir, output_dir):
-    stack = LayerStack.open(input_dir)
+    stack = LayerStack.from_directory(input_dir)
 
     outline = []
     for obj in stack.outline.objects:
@@ -28,6 +28,7 @@ def highlight_outline(input_dir, output_dir):
     marker_nx, marker_ny = math.sin(marker_angle), math.cos(marker_angle)
 
     ap = CircleAperture(0.1, unit=MM)
+    stack['top silk'].apertures.append(ap)
 
     for line in outline:
         cx, cy = (line.x1 + line.x2)/2, (line.y1 + line.y2)/2

examples/load_directory.py

@@ -7,5 +7,5 @@ if __name__ == '__main__':
     args = parser.parse_args()
 
     import gerbonara
-    print(gerbonara.LayerStack.open(args.input))
+    print(gerbonara.LayerStack.from_directory(args.input))
 

examples/test_arc_approx.py

@@ -2,7 +2,6 @@
 
 import math
 
-from gerbonara.utils import MM
 from gerbonara.graphic_objects import Arc
 from gerbonara.graphic_objects import rotate_point
 
@@ -23,8 +22,7 @@ def approx_test():
                     x1, y1 = rotate_point(0, -1, start_angle*eps)
                     x2, y2 = rotate_point(x1, y1, sweep_angle*eps*(-1 if clockwise else 1))
                     
-                    arc = Arc(x1+cx, y1+cy, x2+cx, y2+cy, -x1, -y1, clockwise=clockwise, aperture=None,
+                    arc = Arc(x1+cx, y1+cy, x2+cx, y2+cy, -x1, -y1, clockwise=clockwise, aperture=None, polarity_dark=True)
-                              polarity_dark=True, unit=MM)
                     lines = arc.approximate(max_error=max_error)
 
                     print(f'<path style="fill: {color}; stroke: none;" d="M {cx} {cy} L {lines[0].x1} {lines[0].y1}', end=' ')

gerbonara/__init__.py

@@ -30,6 +30,5 @@ from .excellon import ExcellonFile
 from .ipc356 import Netlist
 from .layers import LayerStack
 from .utils import MM, Inch
-from importlib.metadata import version
 
-__version__ = version('gerbonara')
+__version__ = '1.2.0'

gerbonara/aperture_macros/expression.py

@@ -62,7 +62,7 @@ class Expression:
         return expr(other) / self
 
     def __neg__(self):
-        return NegatedExpression(self).optimized()
+        return NegatedExpression(self)
 
     def __pos__(self):
         return self
@@ -180,9 +180,6 @@ class ConstantExpression(Expression):
     
 @dataclass(frozen=True, slots=True)
 class VariableExpression(Expression):
-    ''' An expression that encapsulates some other complex expression and will replace all occurences of it with a newly
-    allocated variable at export time.
-    '''
     expr: Expression
 
     def optimized(self, variable_binding={}):
@@ -204,7 +201,6 @@ class VariableExpression(Expression):
 
 @dataclass(frozen=True, slots=True)
 class ParameterExpression(Expression):
-    ''' An expression that refers to a macro variable or parameter '''
     number: int
 
     def optimized(self, variable_binding={}):
@@ -339,12 +335,6 @@ class OperatorExpression(Expression):
             # -x [*/] -y == x [*/] y
             case (NegatedExpression(l), (operator.truediv | operator.mul) as op, NegatedExpression(r)):
                 rv = op(l, r)
-            # -x [*/] y == -(x [*/] y)
-            case (NegatedExpression(l), (operator.truediv | operator.mul) as op, r):
-                rv = NegatedExpression(op(l, r))
-            # x [*/] -y == -(x [*/] y)
-            case (l, (operator.truediv | operator.mul) as op, NegatedExpression(r)):
-                rv = NegatedExpression(op(l, r))
             # x + -y == x - y
             case (l, operator.add, NegatedExpression(r)):
                 rv = l-r

gerbonara/aperture_macros/parse.py

@@ -0,0 +1,257 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+
+# Copyright 2021 Jan Sebastian Götte <gerbonara@jaseg.de>
+
+from dataclasses import dataclass, field, replace
+import operator
+import re
+import ast
+import copy
+import warnings
+import math
+
+from . import primitive as ap
+from .expression import *
+from ..utils import MM
+
+# we make our own here instead of using math.degrees to make sure this works with expressions, too.
+def rad_to_deg(x):
+    return (x / math.pi) * 180
+
+def _map_expression(node, variables={}, parameters=set()):
+    if isinstance(node, ast.Num):
+        return ConstantExpression(node.n)
+
+    elif isinstance(node, ast.BinOp):
+        op_map = {ast.Add: operator.add, ast.Sub: operator.sub, ast.Mult: operator.mul, ast.Div: operator.truediv}
+        return OperatorExpression(op_map[type(node.op)],
+                                  _map_expression(node.left, variables, parameters),
+                                  _map_expression(node.right, variables, parameters))
+
+    elif isinstance(node, ast.UnaryOp):
+        if type(node.op) == ast.UAdd:
+            return _map_expression(node.operand, variables, parameters)
+        else:
+            return NegatedExpression(_map_expression(node.operand, variables, parameters))
+
+    elif isinstance(node, ast.Name):
+        num = int(node.id[3:]) # node.id has format var[0-9]+
+        if num in variables:
+            return VariableExpression(variables[num])
+        else:
+            parameters.add(num)
+            return ParameterExpression(num)
+
+    else:
+        raise SyntaxError('Invalid aperture macro expression')
+
+def _parse_expression(expr, variables, parameters):
+    expr = expr.lower().replace('x', '*')
+    expr = re.sub(r'\$([0-9]+)', r'var\1', expr)
+    try:
+        parsed = ast.parse(expr, mode='eval').body
+    except SyntaxError as e:
+        raise SyntaxError('Invalid aperture macro expression') from e
+    return _map_expression(parsed, variables, parameters)
+
+@dataclass(frozen=True, slots=True)
+class ApertureMacro:
+    name: str = field(default=None, hash=False, compare=False)
+    num_parameters: int = 0
+    primitives: tuple = ()
+    comments: tuple = field(default=(), hash=False, compare=False)
+
+    def __post_init__(self):
+        if self.name is None or re.match(r'GNX[0-9A-F]{16}', self.name):
+            # We can't use field(default_factory=...) here because that factory doesn't get a reference to the instance.
+            self._reset_name()
+
+    def _reset_name(self):
+        object.__setattr__(self, 'name', f'GNX{hash(self)&0xffffffffffffffff:016X}')
+
+    @classmethod
+    def parse_macro(kls, macro_name, body, unit):
+        comments = []
+        variables = {}
+        parameters = set()
+        primitives = []
+
+        blocks = body.split('*')
+        for block in blocks:
+            if not (block := block.strip()): # empty block
+                continue
+
+            if block.startswith('0 '): # comment
+                comments.append(block[2:])
+                continue
+            
+            block = re.sub(r'\s', '', block)
+
+            if block[0] == '$': # variable definition
+                try:
+                    name, _, expr = block.partition('=')
+                    number = int(name[1:])
+                    if number in variables:
+                        warnings.warn(f'Re-definition of aperture macro variable ${number} inside macro. Previous definition of ${number} was ${variables[number]}.')
+                    variables[number] = _parse_expression(expr, variables, parameters)
+                except Exception as e:
+                    raise SyntaxError(f'Error parsing variable definition {block!r}') from e
+
+            else: # primitive
+                primitive, *args = block.split(',')
+                args = [ _parse_expression(arg, variables, parameters) for arg in args ]
+                try:
+                    primitives.append(ap.PRIMITIVE_CLASSES[int(primitive)].from_arglist(unit, args))
+                except KeyError as e:
+                    raise SyntaxError(f'Unknown aperture macro primitive code {int(primitive)}')
+
+        return kls(macro_name, max(parameters, default=0), tuple(primitives), tuple(comments))
+
+    def __str__(self):
+        return f'<Aperture macro {self.name}, primitives {self.primitives}>'
+
+    def __repr__(self):
+        return str(self)
+
+    def dilated(self, offset, unit=MM):
+        new_primitives = []
+        for primitive in self.primitives:
+            try:
+                if primitive.exposure.calculate():
+                    new_primitives += primitive.dilated(offset, unit)
+            except IndexError:
+                warnings.warn('Cannot dilate aperture macro primitive with exposure value computed from macro variable.')
+                pass
+        return replace(self, primitives=tuple(new_primitives))
+
+    def substitute_params(self, params, unit=None, macro_name=None):
+        params = dict(enumerate(params, start=1))
+        return replace(self,
+                       num_parameters=0,
+                       name=macro_name,
+                       primitives=tuple(p.substitute_params(params, unit) for p in self.primitives),
+                       comments=(f'Fully substituted instance of {self.name} macro',
+                                 f'Original parameters: {"X".join(map(str, params.values())) if params else "none"}'))
+
+    def to_gerber(self, settings):
+        """ Serialize this macro's content (without the name) into Gerber using the given file unit """
+        comments = [ f'0 {c.replace("*", "_").replace("%", "_")}' for c in self.comments ]
+
+        subexpression_variables = {}
+        def register_variable(expr):
+            expr_str = expr.to_gerber(register_variable, settings.unit)
+            if expr_str not in subexpression_variables:
+                subexpression_variables[expr_str] = self.num_parameters + 1 + len(subexpression_variables)
+            return subexpression_variables[expr_str]
+
+        primitive_defs = [prim.to_gerber(register_variable, settings) for prim in self.primitives]
+        variable_defs = [f'${num}={expr_str}' for expr_str, num in subexpression_variables.items()]
+        return '*\n'.join(comments + variable_defs + primitive_defs)
+
+    def to_graphic_primitives(self, offset, rotation, parameters : [float], unit=None, polarity_dark=True):
+        parameters = dict(enumerate(parameters, start=1))
+        for primitive in self.primitives:
+            yield from primitive.to_graphic_primitives(offset, rotation, parameters, unit, polarity_dark)
+
+    def rotated(self, angle):
+        # aperture macro primitives use degree counter-clockwise, our API uses radians clockwise
+        return replace(self, primitives=tuple(
+            replace(primitive, rotation=primitive.rotation - rad_to_deg(angle)) for primitive in self.primitives))
+
+    def scaled(self, scale):
+        return replace(self, primitives=tuple(
+            primitive.scaled(scale) for primitive in self.primitives))
+
+
+var = ParameterExpression
+deg_per_rad = 180 / math.pi
+
+class GenericMacros:
+
+    _generic_hole = lambda n: (ap.Circle('mm', 0, var(n), 0, 0),)
+
+    # NOTE: All generic macros have rotation values specified in **clockwise radians** like the rest of the user-facing
+    # API.
+    circle = ApertureMacro('GNC', 4, (
+        ap.Circle('mm', 1, var(1), 0, 0, var(4) * -deg_per_rad),
+        *_generic_hole(2)))
+
+    rect = ApertureMacro('GNR', 5, (
+        ap.CenterLine('mm', 1, var(1), var(2), 0, 0, var(5) * -deg_per_rad),
+        *_generic_hole(3)))
+
+    # params: width, height, corner radius, *hole, rotation
+    rounded_rect = ApertureMacro('GRR', 6, (
+        ap.CenterLine('mm', 1, var(1)-2*var(3), var(2), 0, 0, var(6) * -deg_per_rad),
+        ap.CenterLine('mm', 1, var(1), var(2)-2*var(3), 0, 0, var(6) * -deg_per_rad),
+        ap.Circle('mm', 1, var(3)*2, +(var(1)/2-var(3)), +(var(2)/2-var(3)), var(6) * -deg_per_rad),
+        ap.Circle('mm', 1, var(3)*2, +(var(1)/2-var(3)), -(var(2)/2-var(3)), var(6) * -deg_per_rad),
+        ap.Circle('mm', 1, var(3)*2, -(var(1)/2-var(3)), +(var(2)/2-var(3)), var(6) * -deg_per_rad),
+        ap.Circle('mm', 1, var(3)*2, -(var(1)/2-var(3)), -(var(2)/2-var(3)), var(6) * -deg_per_rad),
+        *_generic_hole(4)))
+
+    # params: width, height, length difference between narrow side (top) and wide side (bottom), *hole, rotation
+    isosceles_trapezoid = ApertureMacro('GTR', 6, (
+        ap.Outline('mm', 1, 4,
+                          (var(1)/-2,            var(2)/-2,
+                          var(1)/-2+var(3)/2,   var(2)/2,
+                          var(1)/2-var(3)/2,    var(2)/2,
+                          var(1)/2,             var(2)/-2,
+                          var(1)/-2,            var(2)/-2,),
+                          var(6) * -deg_per_rad),
+        *_generic_hole(4)))
+
+    # params: width, height, length difference between narrow side (top) and wide side (bottom), margin, *hole, rotation
+    rounded_isosceles_trapezoid = ApertureMacro('GRTR', 7, (
+        ap.Outline('mm', 1, 4,
+                          (var(1)/-2,            var(2)/-2,
+                          var(1)/-2+var(3)/2,   var(2)/2,
+                          var(1)/2-var(3)/2,    var(2)/2,
+                          var(1)/2,             var(2)/-2,
+                          var(1)/-2,            var(2)/-2,),
+                          var(7) * -deg_per_rad),
+        ap.VectorLine('mm', 1, var(4)*2, 
+                          var(1)/-2,            var(2)/-2,
+                          var(1)/-2+var(3)/2,   var(2)/2,),
+        ap.VectorLine('mm', 1, var(4)*2, 
+                          var(1)/-2+var(3)/2,   var(2)/2,
+                          var(1)/2-var(3)/2,    var(2)/2,),
+        ap.VectorLine('mm', 1, var(4)*2, 
+                          var(1)/2-var(3)/2,    var(2)/2,
+                          var(1)/2,             var(2)/-2,),
+        ap.VectorLine('mm', 1, var(4)*2, 
+                          var(1)/2,             var(2)/-2,
+                          var(1)/-2,            var(2)/-2,),
+        ap.Circle('mm', 1, var(4)*2, 
+                          var(1)/-2,            var(2)/-2,),
+        ap.Circle('mm', 1, var(4)*2, 
+                          var(1)/-2+var(3)/2,   var(2)/2,),
+        ap.Circle('mm', 1, var(4)*2, 
+                          var(1)/2-var(3)/2,    var(2)/2,),
+        ap.Circle('mm', 1, var(4)*2, 
+                          var(1)/2,             var(2)/-2,),
+        *_generic_hole(5)))
+
+    # w must be larger than h
+    # params: width, height, *hole, rotation
+    obround = ApertureMacro('GNO', 5, (
+        ap.CenterLine('mm', 1, var(1)-var(2), var(2), 0, 0, var(5) * -deg_per_rad),
+        ap.Circle('mm', 1, var(2), +(var(1)-var(2))/2, 0, var(5) * -deg_per_rad),
+        ap.Circle('mm', 1, var(2), -(var(1)-var(2))/2, 0, var(5) * -deg_per_rad),
+        *_generic_hole(3) ))
+
+    polygon = ApertureMacro('GNP', 4, (
+        ap.Polygon('mm', 1, var(2), 0, 0, var(1), var(3) * -deg_per_rad),
+        ap.Circle('mm', 0, var(4), 0, 0)))
+
+
+if __name__ == '__main__':
+    import sys
+    #for line in sys.stdin:
+        #expr = _parse_expression(line.strip())
+        #print(expr, '->', expr.optimized())
+
+    for primitive in parse_macro(sys.stdin.read(), 'mm'):
+        print(primitive)
+

gerbonara/aperture_macros/primitive.py

@@ -97,18 +97,14 @@ class Circle(Primitive):
     exposure : Expression
     diameter : UnitExpression
     # center x/y
-    x : UnitExpression = 0
+    x : UnitExpression
-    y : UnitExpression = 0
+    y : UnitExpression
     rotation : Expression = 0
 
     def to_graphic_primitives(self, offset, rotation, variable_binding={}, unit=None, polarity_dark=True):
         with self.Calculator(self, variable_binding, unit) as calc:
             x, y = rotate_point(calc.x, calc.y, -(deg_to_rad(calc.rotation) + rotation), 0, 0)
             x, y = x+offset[0], y+offset[1]
-
-            if math.isclose(calc.diameter, 0):
-                return []
-
             return [ gp.Circle(x, y, calc.diameter/2, polarity_dark=(bool(calc.exposure) == polarity_dark)) ]
 
     def substitute_params(self, binding, unit):
@@ -148,9 +144,6 @@ class VectorLine(Primitive):
             center_x, center_y = center_x+offset[0], center_y+offset[1]
             rotation += deg_to_rad(calc.rotation) + math.atan2(delta_y, delta_x)
 
-            if math.isclose(calc.width, 0):
-                return []
-
             return [ gp.Rectangle(center_x, center_y, length, calc.width, rotation=rotation,
                         polarity_dark=(bool(calc.exposure) == polarity_dark)) ]
 
@@ -189,9 +182,6 @@ class CenterLine(Primitive):
             x, y = x+offset[0], y+offset[1]
             w, h = calc.width, calc.height
 
-            if math.isclose(calc.width, 0) or math.isclose(calc.height, 0):
-                return []
-
             return [ gp.Rectangle(x, y, w, h, rotation, polarity_dark=(bool(calc.exposure) == polarity_dark)) ]
 
     def substitute_params(self, binding, unit):
@@ -227,8 +217,7 @@ class Polygon(Primitive):
             rotation += deg_to_rad(calc.rotation)
             x, y = rotate_point(calc.x, calc.y, -rotation, 0, 0)
             x, y = x+offset[0], y+offset[1]
-            print('xy', calc.x, calc.y)
+            return [ gp.ArcPoly.from_regular_polygon(calc.x, calc.y, calc.diameter/2, calc.n_vertices, rotation,
-            return [ gp.ArcPoly.from_regular_polygon(x, y, calc.diameter/2, int(calc.n_vertices), rotation,
                         polarity_dark=(bool(calc.exposure) == polarity_dark)) ]
 
     def dilated(self, offset, unit):
@@ -262,9 +251,6 @@ class Moire(Primitive):
             x, y = rotate_point(calc.x, calc.y, -rotation, 0, 0)
             x, y = x+offset[0], y+offset[1]
 
-            if math.isclose(calc.d_outer, 0):
-                return []
-
             pitch = calc.line_thickness + calc.gap_w
             for i in range(int(round(calc.num_circles))):
                 yield gp.Circle(x, y, calc.d_outer/2 - i*pitch, polarity_dark=True)
@@ -294,7 +280,7 @@ class Moire(Primitive):
 @dataclass(frozen=True, slots=True)
 class Thermal(Primitive):
     code = 7
-    # Note: Thermal primitives according to spec don't have an exposure variable
+    exposure : Expression
     # center x/y
     x : UnitExpression
     y : UnitExpression
@@ -309,16 +295,13 @@ class Thermal(Primitive):
             x, y = rotate_point(calc.x, calc.y, -rotation, 0, 0)
             x, y = x+offset[0], y+offset[1]
 
-            dark = True
+            dark = (bool(calc.exposure) == polarity_dark)
-
-            if math.isclose(calc.d_outer, 0):
-                return []
 
             return [
                     gp.Circle(x, y, calc.d_outer/2, polarity_dark=dark),
                     gp.Circle(x, y, calc.d_inner/2, polarity_dark=not dark),
-                    gp.Rectangle(x, y, calc.d_outer, calc.gap_w, rotation=rotation, polarity_dark=not dark),
+                    gp.Rectangle(x, y, d_outer, gap_w, rotation=rotation, polarity_dark=not dark),
-                    gp.Rectangle(x, y, calc.gap_w, calc.d_outer, rotation=rotation, polarity_dark=not dark),
+                    gp.Rectangle(x, y, gap_w, d_outer, rotation=rotation, polarity_dark=not dark),
                     ]
 
     def dilate(self, offset, unit):
@@ -400,10 +383,6 @@ class Outline(Primitive):
             bound_coords = [ rotate_point(calc(x), calc(y), -rotation, 0, 0) for x, y in self.points ]
             bound_coords = [ (x+offset[0], y+offset[1]) for x, y in bound_coords ]
             bound_radii = [None] * len(bound_coords)
-
-            if len(bound_coords) < 3:
-                return []
-
             return [gp.ArcPoly(bound_coords, bound_radii, polarity_dark=(bool(calc.exposure) == polarity_dark))]
 
     def dilated(self, offset, unit):

gerbonara/apertures.py

@@ -21,6 +21,7 @@ import math
 from dataclasses import dataclass, replace, field, fields, InitVar, KW_ONLY
 from functools import lru_cache
 
+from .aperture_macros.parse import GenericMacros
 from .utils import LengthUnit, MM, Inch, sum_bounds
 
 from . import graphic_primitives as gp
@@ -159,8 +160,7 @@ class ExcellonTool(Aperture):
         return self
 
     def to_macro(self, rotation=0):
-        from .aperture_macros.parse import GenericMacros
+        return ApertureMacroInstance(GenericMacros.circle, self._params(unit=MM))
-        return ApertureMacroInstance(GenericMacros.circle, self._params(unit=MM), unit=MM)
 
     def _params(self, unit=None):
         return (self.unit.convert_to(unit, self.diameter),)
@@ -205,9 +205,7 @@ class CircleAperture(Aperture):
                        hole_dia=None if self.hole_dia is None else self.hole_dia*scale)
 
     def to_macro(self, rotation=0):
-        from .aperture_macros.parse import GenericMacros
+        return ApertureMacroInstance(GenericMacros.circle, self._params(unit=MM))
-        return GenericMacros.circle(MM(self.diameter, self.unit),
-                                    MM(self.hole_dia, self.unit))
 
     def _params(self, unit=None):
         return _strip_right(
@@ -262,11 +260,12 @@ class RectangleAperture(Aperture):
                        hole_dia=None if self.hole_dia is None else self.hole_dia*scale)
 
     def to_macro(self, rotation=0):
-        from .aperture_macros.parse import GenericMacros
+        return ApertureMacroInstance(GenericMacros.rect,
-        return GenericMacros.rect(MM(self.w, self.unit),
+                (MM(self.w, self.unit),
-                                  MM(self.h, self.unit),
+                    MM(self.h, self.unit),
-                                  MM(self.hole_dia, self.unit),
+                    MM(self.hole_dia, self.unit) or 0,
-                                  rotation)
+                    0,
+                    rotation))
 
     def _params(self, unit=None):
         return _strip_right(
@@ -330,11 +329,12 @@ class ObroundAperture(Aperture):
             rotation -= -math.pi/2
             inst = replace(self, w=self.h, h=self.w, hole_dia=self.hole_dia)
 
-        from .aperture_macros.parse import GenericMacros
+        return ApertureMacroInstance(GenericMacros.obround,
-        return GenericMacros.obround(MM(inst.w, self.unit),
+                (MM(inst.w, self.unit),
-                                     MM(inst.h, self.unit),
+                 MM(inst.h, self.unit),
-                                     MM(inst.hole_dia, self.unit) or 0,
+                 MM(inst.hole_dia, self.unit) or 0,
-                                     rotation)
+                 0,
+                 rotation))
 
     def _params(self, unit=None):
         return _strip_right(
@@ -390,18 +390,12 @@ class PolygonAperture(Aperture):
                        hole_dia=None if self.hole_dia is None else self.hole_dia*scale)
 
     def to_macro(self):
-        from .aperture_macros.parse import GenericMacros
+        return ApertureMacroInstance(GenericMacros.polygon, self._params(MM))
-        return GenericMacros.polygon(self.n_vertices,
-                                     MM(self.diameter, self.unit),
-                                     MM(self.hole_dia, self.unit),
-                                     self.rotation)
 
     def _params(self, unit=None):
         rotation = self.rotation % (2*math.pi / self.n_vertices)
         if math.isclose(rotation, 0, abs_tol=1e-6):
             rotation = None
-        else:
-            rotation = math.degrees(rotation)
 
         if self.hole_dia is not None:
             return self.unit.convert_to(unit, self.diameter), self.n_vertices, rotation, self.unit.convert_to(unit, self.hole_dia)
@@ -462,7 +456,7 @@ class ApertureMacroInstance(Aperture):
         # We do this because here we do not have information about which parameter has which physical units.
         parameters = self.parameters
         if len(parameters) > self.macro.num_parameters:
-            warnings.warn(f'Aperture definition using macro {self.macro.name} has more parameters than the macro uses.')
+            warnings.warn('Aperture definition using macro {self.macro.name} has more parameters than the macro uses.')
             parameters = parameters[:self.macro.num_parameters]
         return tuple(parameters)
 

gerbonara/cad/kicad/base_types.py

@@ -9,8 +9,7 @@ from itertools import cycle
 from .sexp import *
 from .sexp_mapper import *
 from ...newstroke import Newstroke
-from ...utils import rotate_point, sum_bounds, Tag, MM
+from ...utils import rotate_point, Tag, MM
-from ...layers import LayerStack
 from ... import apertures as ap
 from ... import graphic_objects as go
 
@@ -38,40 +37,11 @@ LAYER_MAP_K2G = {
 LAYER_MAP_G2K = {v: k for k, v in LAYER_MAP_K2G.items()}
 
 
-class BBoxMixin:
-    def bounding_box(self, unit=MM):
-        if not hasattr(self, '_bounding_box'):
-            (min_x, min_y), (max_x, max_y) = sum_bounds(fe.bounding_box(unit) for fe in self.render())
-            # Convert back from gerbonara's coordinates to kicad coordinates.
-            self._bounding_box = (min_x, -max_y), (max_x, -min_y)
-
-        return self._bounding_box
-
-
-@sexp_type('uuid')
-class UUID:
-    value: str = field(default_factory=uuid.uuid4)
-
-    def __deepcopy__(self, memo):
-        return UUID()
-
-    def __after_parse__(self, parent):
-        self.value = str(self.value)
-
-    def before_sexp(self):
-        self.value = str(self.value)
-
-    def bump(self):
-        self.value = uuid.uuid4()
-
-
 @sexp_type('group')
 class Group:
-    locked: Flag() = False
     name: str = ""
-    id: Named(str) = None
+    id: Named(str) = ""
-    uuid: UUID = field(default_factory=UUID)
+    members: Named(List(str)) = field(default_factory=list)
-    members: Named(Array(str)) = field(default_factory=list)
 
 
 @sexp_type('color')
@@ -124,22 +94,10 @@ class Stroke:
         return attrs
 
 
-@sexp_type('fill')
-class Fill:
-    type: Named(AtomChoice(Atom.none, Atom.outline, Atom.background, Atom.color)) = Atom.none
-    color: Color = None
-
-
-class WidthMixin:
-    def __post_init__(self):
-        if self.width is not None:
-            self.stroke = Stroke(self.width)
-
-
 class Dasher:
     def __init__(self, obj):
         if obj.stroke:
-            w = obj.stroke.width if obj.stroke.width not in (None, 0, 0.0) else 0.254
+            w = obj.stroke.width if obj.stroke.width is not None else 0.254
             t = obj.stroke.type
         else:
             w = obj.width or 0
@@ -283,14 +241,7 @@ class XYCoord:
 
 @sexp_type('pts')
 class PointList:
-    @classmethod
+    xy : List(XYCoord) = field(default_factory=list)
-    def __map__(kls, obj, parent=None, path=''):
-        _tag, *values = obj
-        return [map_sexp(XYCoord, elem, parent=parent, path=path) for elem in values]
-
-    @classmethod
-    def __sexp__(kls, value):
-        yield [kls.name_atom, *(e for elem in value for e in elem.__sexp__(elem))]
 
 
 @sexp_type('arc')
@@ -303,38 +254,15 @@ class Arc:
 @sexp_type('pts')
 class ArcPointList:
     @classmethod
-    def __map__(kls, obj, parent=None, path=''):
+    def __map__(kls, obj, parent=None):
         _tag, *values = obj
-        return [map_sexp((XYCoord if elem[0] == 'xy' else Arc), elem, parent=parent, path=path) for elem in values]
+        return [map_sexp((XYCoord if elem[0] == 'xy' else Arc), elem, parent=parent) for elem in values]
 
     @classmethod
     def __sexp__(kls, value):
         yield [kls.name_atom, *(e for elem in value for e in elem.__sexp__(elem))]
 
 
-@sexp_type('net')
-class Net:
-    index: int = 0
-    name: str = ''
-
-
-class NetMixin:
-    def reset_net(self):
-        self.net = Net()
-
-    @property
-    def net_index(self):
-        if self.net is None:
-            return 0
-        return self.net.index
-
-    @property
-    def net_name(self):
-        if self.net is None:
-            return ''
-        return self.net.name
-
-
 @sexp_type('xyz')
 class XYZCoord:
     x: float = 0
@@ -370,8 +298,8 @@ class FontSpec:
     face: Named(str) = None
     size: Rename(XYCoord) = field(default_factory=lambda: XYCoord(1.27, 1.27))
     thickness: Named(float) = None
-    bold: OmitDefault(Named(LegacyCompatibleFlag())) = False
+    bold: Flag() = False
-    italic: OmitDefault(Named(LegacyCompatibleFlag())) = False
+    italic: Flag() = False
     line_spacing: Named(float) = None
 
 
@@ -399,8 +327,8 @@ class Justify:
 @sexp_type('effects')
 class TextEffect:
     font: FontSpec = field(default_factory=FontSpec)
+    hide: Flag() = False
     justify: OmitDefault(Justify) = field(default_factory=Justify)
-    hide: OmitDefault(Named(LegacyCompatibleFlag())) = False
 
 
 class TextMixin:
@@ -541,6 +469,23 @@ class Timestamp:
         self.value = uuid.uuid4()
 
 
+@sexp_type('uuid')
+class UUID:
+    value: str = field(default_factory=uuid.uuid4)
+
+    def __deepcopy__(self, memo):
+        return UUID()
+
+    def __after_parse__(self, parent):
+        self.value = str(self.value)
+
+    def before_sexp(self):
+        self.value = Atom(str(self.value))
+
+    def bump(self):
+        self.value = uuid.uuid4()
+
+
 @sexp_type('tedit')
 class EditTime:
     value: str = field(default_factory=time.time)
@@ -577,13 +522,11 @@ class DrawnProperty(TextMixin):
     key: str = None
     value: str = None
     id: Named(int) = None
-    at: AtPos = None
+    at: AtPos = field(default_factory=AtPos)
-    unlocked: OmitDefault(Named(YesNoAtom())) = True
     layer: Named(str) = None
-    hide: OmitDefault(Named(YesNoAtom())) = False
+    hide: Flag() = False
-    uuid: UUID = None
     tstamp: Timestamp = None
-    effects: OmitDefault(TextEffect) = field(default_factory=TextEffect)
+    effects: TextEffect = field(default_factory=TextEffect)
     _ : SEXP_END = None
     parent: object = None
 
@@ -600,14 +543,6 @@ class DrawnProperty(TextMixin):
         self.value = value
 
 
-@sexp_type('chamfer')
-class Chamfer:
-    top_left: Flag() = False
-    top_right: Flag() = False
-    bottom_left: Flag() = False
-    bottom_right: Flag() = False
-
-
 if __name__ == '__main__':
     class Foo:
         pass

gerbonara/cad/kicad/footprints.py

@@ -21,7 +21,6 @@ from . import graphical_primitives as gr
 
 from ..primitives import Positioned
 
-from ... import __version__
 from ... import graphic_primitives as gp
 from ... import graphic_objects as go
 from ... import apertures as ap
@@ -55,9 +54,8 @@ class Text:
     type: AtomChoice(Atom.reference, Atom.value, Atom.user) = Atom.user
     text: str = ""
     at: AtPos = field(default_factory=AtPos)
-    unlocked: OmitDefault(Named(YesNoAtom())) = False
+    unlocked: Flag() = False
     layer: Named(str) = None
-    uuid: UUID = field(default_factory=UUID)
     hide: Flag() = False
     effects: TextEffect = field(default_factory=TextEffect)
     tstamp: Timestamp = None
@@ -74,15 +72,12 @@ class TextBox:
     locked: Flag() = False
     text: str = None
     start: Rename(XYCoord) = None
-    end: Rename(XYCoord) = None
+    end: Named(XYCoord) = None
-    margins: Rename(gr.Margins) = None
     pts: PointList = None
     angle: Named(float) = 0.0
     layer: Named(str) = None
-    uuid: UUID = field(default_factory=UUID)
     tstamp: Timestamp = None
     effects: TextEffect = field(default_factory=TextEffect)
-    border: Named(YesNoAtom()) = False
     stroke: Stroke = field(default_factory=Stroke)
     render_cache: RenderCache = None
 
@@ -95,7 +90,6 @@ class Line:
     start: Rename(XYCoord) = None
     end: Rename(XYCoord) = None
     layer: Named(str) = None
-    uuid: UUID = field(default_factory=UUID)
     width: Named(float) = None
     stroke: Stroke = None
     locked: Flag() = False
@@ -119,10 +113,9 @@ class Rectangle:
     start: Rename(XYCoord) = None
     end: Rename(XYCoord) = None
     layer: Named(str) = None
-    uuid: UUID = field(default_factory=UUID)
     width: Named(float) = None
     stroke: Stroke = None
-    fill: gr.FillMode = None
+    fill: Named(AtomChoice(Atom.solid, Atom.none)) = None
     locked: Flag() = False
     tstamp: Timestamp = None
 
@@ -153,10 +146,9 @@ class Circle:
     center: Rename(XYCoord) = None
     end: Rename(XYCoord) = None
     layer: Named(str) = None
-    uuid: UUID = field(default_factory=UUID)
     width: Named(float) = None
     stroke: Stroke = None
-    fill: gr.FillMode = None
+    fill: Named(AtomChoice(Atom.solid, Atom.none)) = None
     locked: Flag() = False
     tstamp: Timestamp = None
 
@@ -190,10 +182,8 @@ class Arc:
     mid: Rename(XYCoord) = None
     end: Rename(XYCoord) = None
     width: Named(float) = None
-    angle: Named(float) = None
     stroke: Stroke = None
     layer: Named(str) = None
-    uuid: UUID = field(default_factory=UUID)
     locked: Flag() = False
     tstamp: Timestamp = None
 
@@ -245,23 +235,22 @@ class Arc:
 
 @sexp_type('fp_poly')
 class Polygon:
-    pts: PointList = field(default_factory=list)
+    pts: PointList = field(default_factory=PointList)
     layer: Named(str) = None
-    uuid: UUID = field(default_factory=UUID)
     width: Named(float) = None
     stroke: Stroke = None
-    fill: gr.FillMode = None
+    fill: Named(AtomChoice(Atom.solid, Atom.none)) = None
     locked: Flag() = False
     tstamp: Timestamp = None
 
     def render(self, variables=None, cache=None):
-        if len(self.pts) < 2:
+        if len(self.pts.xy) < 2:
             return
 
         dasher = Dasher(self)
-        start = self.pts[0]
+        start = self.pts.xy[0]
         dasher.move(start.x, start.y)
-        for point in self.pts[1:]:
+        for point in self.pts.xy[1:]:
             dasher.line(point.x, point.y)
 
         if dasher.width > 0:
@@ -270,14 +259,13 @@ class Polygon:
                 yield go.Line(x1, -y1, x2, -y2, aperture=aperture, unit=MM)
 
         if self.fill == Atom.solid:
-            yield go.Region([(pt.x, -pt.y) for pt in self.pts], unit=MM)
+            yield go.Region([(pt.x, -pt.y) for pt in self.pts.xy], unit=MM)
 
 
 @sexp_type('fp_curve')
 class Curve:
-    pts: PointList = field(default_factory=list)
+    pts: PointList = field(default_factory=PointList)
     layer: Named(str) = None
-    uuid: UUID = field(default_factory=UUID)
     width: Named(float) = None
     stroke: Stroke = None
     locked: Flag() = False
@@ -287,6 +275,46 @@ class Curve:
         raise NotImplementedError('Bezier rendering is not yet supported. Please raise an issue and provide an example file.')
 
 
+@sexp_type('format')
+class DimensionFormat:
+    prefix: Named(str) = None
+    suffix: Named(str) = None
+    units: Named(int) = 3
+    units_format: Named(int) = 0
+    precision: Named(int) = 3
+    override_value: Named(str) = None
+    suppress_zeros: Flag() = False
+
+
+@sexp_type('style')
+class DimensionStyle:
+    thickness: Named(float) = None
+    arrow_length: Named(float) = None
+    text_position_mode: Named(int) = 0
+    extension_height: Named(float) = None
+    text_frame: Named(int) = 0
+    extension_offset: Named(str) = None
+    keep_text_aligned: Flag() = False
+
+
+@sexp_type('dimension')
+class Dimension:
+    locked: Flag() = False
+    type: AtomChoice(Atom.aligned, Atom.leader, Atom.center, Atom.orthogonal, Atom.radial) = None
+    layer: Named(str) = None
+    tstamp: Timestamp = None
+    pts: PointList = field(default_factory=PointList)
+    height: Named(float) = None
+    orientation: Named(int) = 0
+    leader_length: Named(float) = None
+    gr_text: Named(Text) = None
+    format: DimensionFormat = field(default_factory=DimensionFormat)
+    style: DimensionStyle = field(default_factory=DimensionStyle)
+
+    def render(self, variables=None, cache=None):
+        raise NotImplementedError()
+
+
 @sexp_type('drill')
 class Drill:
     oval: Flag() = False
@@ -295,6 +323,12 @@ class Drill:
     offset: Rename(XYCoord) = None
 
 
+@sexp_type('net')
+class NetDef:
+    number: int = None
+    name: str = None
+
+
 @sexp_type('options')
 class CustomPadOptions:
     clearance: Named(AtomChoice(Atom.outline, Atom.convexhull)) = Atom.outline
@@ -311,7 +345,7 @@ class CustomPadPrimitives:
     polygons: List(gr.Polygon) = field(default_factory=list)
     curves: List(gr.Curve) = field(default_factory=list)
     width: Named(float) = None
-    fill: gr.FillMode = True
+    fill: Named(YesNoAtom()) = True
 
     def all(self):
         yield from self.lines
@@ -322,8 +356,16 @@ class CustomPadPrimitives:
         yield from self.curves
 
 
+@sexp_type('chamfer')
+class Chamfer:
+    top_left: Flag() = False
+    top_right: Flag() = False
+    bottom_left: Flag() = False
+    bottom_right: Flag() = False
+
+
 @sexp_type('pad')
-class Pad(NetMixin):
+class Pad:
     number: str = None
     type: AtomChoice(Atom.thru_hole, Atom.smd, Atom.connect, Atom.np_thru_hole) = None
     shape: AtomChoice(Atom.circle, Atom.rect, Atom.oval, Atom.trapezoid, Atom.roundrect, Atom.custom) = None
@@ -333,22 +375,19 @@ class Pad(NetMixin):
     drill: Drill = None
     layers: Named(Array(str)) = field(default_factory=list)
     properties: List(Property) = field(default_factory=list)
-    remove_unused_layers: Named(YesNoAtom()) = False
+    remove_unused_layers: Wrap(Flag()) = False
-    keep_end_layers: Named(YesNoAtom()) = False
+    keep_end_layers: Wrap(Flag()) = False
-    zone_layer_connections: Named(Array(str)) = field(default_factory=list)
-    uuid: UUID = field(default_factory=UUID)
     rect_delta: Rename(XYCoord) = None
     roundrect_rratio: Named(float) = None
     thermal_bridge_angle: Named(int) = 45
     thermal_bridge_width: Named(float) = 0.5
     chamfer_ratio: Named(float) = None
     chamfer: Chamfer = None
-    net: Net = None
+    net: NetDef = None
     tstamp: Timestamp = None
     pin_function: Named(str) = None
     pintype: Named(str) = None
     pinfunction: Named(str) = None
-    teardrops: gr.TeardropSpec = None
     die_length: Named(float) = None
     solder_mask_margin: Named(float) = None
     solder_paste_margin: Named(float) = None
@@ -358,10 +397,9 @@ class Pad(NetMixin):
     thermal_width: Named(float) = None
     thermal_gap: Named(float) = None
     options: OmitDefault(CustomPadOptions) = None
-    padstack: gr.PadStack = None
     primitives: OmitDefault(CustomPadPrimitives) = None
     _: SEXP_END = None
-    footprint: object = field(repr=False, default=None)
+    footprint: object = None
 
     def __after_parse__(self, parent=None):
         self.layers = unfuck_layers(self.layers)
@@ -423,11 +461,11 @@ class Pad(NetMixin):
 
         elif self.shape == Atom.rect:
             if margin > 0:
-                return GenericMacros.rounded_rect(self.size.x+2*margin,
+                return ap.ApertureMacroInstance(GenericMacros.rounded_rect,
-                                                  self.size.y+2*margin,
+                        (self.size.x+2*margin, self.size.y+2*margin,
-                                                  margin,
+                         margin,
-                                                  0, # no hole
+                         0, 0, # no hole
-                                                  rotation)
+                         rotation), unit=MM)
             else:
                 return ap.RectangleAperture(self.size.x+2*margin, self.size.y+2*margin, unit=MM).rotated(-rotation)
 
@@ -454,29 +492,28 @@ class Pad(NetMixin):
                 # Note: KiCad already uses MM units, so no conversion needed here.
 
                 alpha = math.atan(y / dy) if dy > 0 else 0
-                return GenericMacros.isosceles_trapezoid(x+dy+2*margin*math.cos(alpha),
+                return ap.ApertureMacroInstance(GenericMacros.isosceles_trapezoid,
-                                                         y+2*margin,
+                        (x+dy+2*margin*math.cos(alpha), y+2*margin,
-                                                         2*dy,
+                         2*dy,
-                                                         0, # no hole
+                         0, 0, # no hole
-                                                         -rotation + math.pi)
+                         -rotation + math.pi), unit=MM)
 
             else:
-                return GenericMacros.rounded_isosceles_trapezoid(x+dy,
+                return ap.ApertureMacroInstance(GenericMacros.rounded_isosceles_trapezoid,
-                                                                 y,
+                        (x+dy, y,
-                                                                 2*dy,
+                         2*dy, margin,
-                                                                 margin,
+                         0, 0, # no hole
-                                                                 0, # no hole
+                         -rotation + math.pi), unit=MM)
-                                                                 -rotation + math.pi)
 
         elif self.shape == Atom.roundrect:
             x, y = self.size.x, self.size.y
             r = min(x, y) * self.roundrect_rratio
             if margin > -r:
-                return GenericMacros.rounded_rect(x+2*margin,
+                return ap.ApertureMacroInstance(GenericMacros.rounded_rect,
-                                                  y+2*margin,
+                        (x+2*margin, y+2*margin,
-                                                  r+margin,
+                         r+margin,
-                                                  0, # no hole
+                         0, 0, # no hole
-                                                  rotation)
+                         rotation), unit=MM)
             else:
                 return ap.RectangleAperture(x+margin, y+margin, unit=MM).rotated(-rotation)
 
@@ -558,27 +595,18 @@ class Pad(NetMixin):
 @sexp_type('model')
 class Model:
     name: str = ''
-    hide: Flag() = False
     at: Named(XYZCoord) = field(default_factory=XYZCoord)
     offset: Named(XYZCoord) = field(default_factory=XYZCoord)
-    opacity: Named(float) = None
     scale: Named(XYZCoord) = field(default_factory=XYZCoord)
     rotate: Named(XYZCoord) = field(default_factory=XYZCoord)
 
 
-@sexp_type('component_classes')
-class FootprintComponentClasses:
-    classes: List(Named(str, name='class')) = field(default_factory=list)
-
-
 SUPPORTED_FILE_FORMAT_VERSIONS = [20210108, 20211014, 20221018, 20230517]
 @sexp_type('footprint')
 class Footprint:
     name: str = None
     _version: Named(int, name='version') = 20221018
-    uuid: UUID = field(default_factory=UUID)
+    generator: Named(Atom) = Atom.gerbonara
-    generator: Named(str) = Atom.gerbonara
-    generator_version: Named(str) = __version__
     locked: Flag() = False
     placed: Flag() = False
     layer: Named(str) = 'F.Cu'
@@ -588,14 +616,12 @@ class Footprint:
     descr: Named(str) = None
     tags: Named(str) = None
     properties: List(DrawnProperty) = field(default_factory=list)
-    component_classes: FootprintComponentClasses = None
     path: Named(str) = None
     sheetname: Named(str) = None
     sheetfile: Named(str) = None
     autoplace_cost90: Named(float) = None
     autoplace_cost180: Named(float) = None
     solder_mask_margin: Named(float) = None
-    solder_paste_margin_ratio: Named(float) = None
     solder_paste_margin: Named(float) = None
     solder_paste_ratio: Named(float) = None
     clearance: Named(float) = None
@@ -613,15 +639,15 @@ class Footprint:
     arcs: List(Arc) = field(default_factory=list)
     polygons: List(Polygon) = field(default_factory=list)
     curves: List(Curve) = field(default_factory=list)
-    dimensions: List(gr.Dimension) = field(default_factory=list)
+    dimensions: List(Dimension) = field(default_factory=list)
     pads: List(Pad) = field(default_factory=list)
     zones: List(Zone) = field(default_factory=list)
     groups: List(Group) = field(default_factory=list)
-    embedded_fonts: Named(YesNoAtom()) = False
     models: List(Model) = field(default_factory=list)
     _ : SEXP_END = None
     original_filename: str = None
-    board: object = field(repr=False, default=None)
+    _bounding_box: tuple = None
+    board: object = None
 
     def __after_parse__(self, parent):
         for pad in self.pads:
@@ -668,10 +694,6 @@ class Footprint:
         if not self.property_value('Description', None):
             self.set_property('Description', self.descr or '', 0, 0, 0)
 
-    def reset_nets(self):
-        for pad in self.pads:
-            pad.reset_net()
-
     @property
     def pads_by_number(self):
         return {(int(pad.number) if pad.number.isnumeric() else pad.number): pad for pad in self.pads if pad.number}
@@ -698,14 +720,6 @@ class Footprint:
     def offset(self, x=0, y=0):
         self.at = self.at.with_offset(x, y)
 
-    def copy_placement(self, template):
-        # Fix up rotation of pads - KiCad saves each pad's rotation in *absolute* coordinates, not relative to the
-        # footprint. Because we overwrite the footprint's rotation below, we have to first fix all pads to match the
-        # new rotation.
-        self.rotate(math.radians(template.at.rotation - self.at.rotation))
-        self.at = copy.copy(template.at)
-        self.side = template.side
-
     @property
     def version(self):
         return self._version
@@ -790,7 +804,7 @@ class Footprint:
 
         self.layer = flip_layer(self.layer)
         for obj in self.objects():
-            if getattr(obj, 'layer', None) is not None:
+            if hasattr(obj, 'layer'):
                 obj.layer = flip_layer(obj.layer)
 
             if hasattr(obj, 'layers'):
@@ -800,9 +814,8 @@ class Footprint:
             obj.effects.justify.mirror = not obj.effects.justify.mirror
 
         for obj in self.properties:
-            if obj.layer is not None:
+            obj.effects.justify.mirror = not obj.effects.justify.mirror
-                obj.effects.justify.mirror = not obj.effects.justify.mirror
+            obj.layer = flip_layer(obj.layer)
-                obj.layer = flip_layer(obj.layer)
 
     @property
     def single_sided(self):
@@ -841,20 +854,19 @@ class Footprint:
         around the given coordinates in the global coordinate space. Otherwise rotate around the footprint's origin. """
         if (cx, cy) != (None, None):
             x, y = self.at.x-cx, self.at.y-cy
-            self.at.x = math.cos(-angle)*x - math.sin(-angle)*y + cx
+            self.at.x = math.cos(angle)*x - math.sin(angle)*y + cx
-            self.at.y = math.sin(-angle)*x + math.cos(-angle)*y + cy
+            self.at.y = math.sin(angle)*x + math.cos(angle)*y + cy
 
-        self.at.rotation = (self.at.rotation + math.degrees(angle)) % 360
+        self.at.rotation = (self.at.rotation - math.degrees(angle)) % 360
 
         for pad in self.pads:
-            pad.at.rotation = (pad.at.rotation + math.degrees(angle)) % 360
+            pad.at.rotation = (pad.at.rotation - math.degrees(angle)) % 360
 
         for prop in self.properties:
-            if prop.at is not None:
+            prop.at.rotation = (prop.at.rotation - math.degrees(angle)) % 360
-                prop.at.rotation = (prop.at.rotation + math.degrees(angle)) % 360
 
         for text in self.texts:
-            text.at.rotation = (text.at.rotation + math.degrees(angle)) % 360
+            text.at.rotation = (text.at.rotation - math.degrees(angle)) % 360
 
     def set_rotation(self, angle):
         old_deg = self.at.rotation
@@ -865,8 +877,7 @@ class Footprint:
             pad.at.rotation = (pad.at.rotation + delta) % 360
 
         for prop in self.properties:
-            if prop.at is not None:
+            prop.at.rotation = (prop.at.rotation + delta) % 360
-                prop.at.rotation = (prop.at.rotation + delta) % 360
 
         for text in self.texts:
             text.at.rotation = (text.at.rotation + delta) % 360
@@ -886,21 +897,18 @@ class Footprint:
                 (self.zones if zones else []),
                 self.groups if groups else [])
 
-    def render(self, layer_stack, layer_map=None, x=0, y=0, rotation=0, text=False, flip=False, variables={}, cache=None):
+    def render(self, layer_stack, layer_map, x=0, y=0, rotation=0, text=False, flip=False, variables={}, cache=None):
         x += self.at.x
         y += self.at.y
         rotation += math.radians(self.at.rotation)
 
-        if layer_map is None:
+        for obj in self.objects(pads=False, text=text, zones=False):
-            layer_map = {kc_id: gn_id for kc_id, gn_id in LAYER_MAP_K2G.items() if gn_id in layer_stack}
-
-        for obj in self.objects(pads=False, text=text, zones=False, groups=False):
             if not (layer := layer_map.get(obj.layer)):
                 continue
 
             for fe in obj.render(variables=variables):
                 fe.rotate(rotation)
-                fe.offset(x, y, MM)
+                fe.offset(x, -y, MM)
                 layer_stack[layer].objects.append(fe)
 
         for obj in self.pads:
@@ -932,7 +940,7 @@ class Footprint:
 
                     for fe in obj.render(margin=margin, cache=cache):
                         fe.rotate(rotation)
-                        fe.offset(x, y, MM)
+                        fe.offset(x, -y, MM)
                         if isinstance(fe, go.Flash) and fe.aperture:
                             fe.aperture = fe.aperture.rotated(rotation)
                         layer_stack[layer_map[layer]].objects.append(fe)
@@ -940,7 +948,7 @@ class Footprint:
         for obj in self.pads:
             for fe in obj.render_drill():
                 fe.rotate(rotation)
-                fe.offset(x, y, MM)
+                fe.offset(x, -y, MM)
 
                 if obj.type == Atom.np_thru_hole:
                     layer_stack.drill_npth.append(fe)
@@ -948,9 +956,10 @@ class Footprint:
                     layer_stack.drill_pth.append(fe)
     
     def bounding_box(self, unit=MM):
-        if not hasattr(self, '_bounding_box'):
+        if not self._bounding_box:
             stack = LayerStack()
-            self.render(stack, layer_map=None, x=0, y=0, rotation=0, flip=False, text=False, variables={})
+            layer_map = {kc_id: gn_id for kc_id, gn_id in LAYER_MAP_K2G.items() if gn_id in stack}
+            self.render(stack, layer_map, x=0, y=0, rotation=0, flip=False, text=False, variables={})
             self._bounding_box = stack.bounding_box(unit)
         return self._bounding_box
 
@@ -975,7 +984,9 @@ class FootprintInstance(Positioned):
         if self.value is not None:
             variables['VALUE'] = str(self.value)
 
-        self.sexp.render(layer_stack, layer_map=None,
+        layer_map = {kc_id: gn_id for kc_id, gn_id in LAYER_MAP_K2G.items() if gn_id in layer_stack}
+
+        self.sexp.render(layer_stack, layer_map,
                          x=x, y=y, rotation=rotation,
                          flip=flip,
                          text=(not self.hide_text),

gerbonara/cad/kicad/graphical_primitives.py

@@ -1,8 +1,6 @@
 
 import string
 import math
-import base64
-import textwrap
 
 from .sexp import *
 from .base_types import *
@@ -11,7 +9,7 @@ from .primitives import *
 from ... import graphic_objects as go
 from ... import apertures as ap
 from ...newstroke import Newstroke
-from ...utils import rotate_point, MM, arc_bounds
+from ...utils import rotate_point, MM
 
 @sexp_type('layer')
 class TextLayer:
@@ -20,12 +18,10 @@ class TextLayer:
 
 
 @sexp_type('gr_text')
-class Text(TextMixin, BBoxMixin):
+class Text(TextMixin):
-    locked: Flag() = False
     text: str = ''
     at: AtPos = field(default_factory=AtPos)
     layer: TextLayer = field(default_factory=TextLayer)
-    uuid: UUID = field(default_factory=UUID)
     tstamp: Timestamp = None
     effects: TextEffect = field(default_factory=TextEffect)
     render_cache: RenderCache = None
@@ -35,19 +31,16 @@ class Text(TextMixin, BBoxMixin):
 
 
 @sexp_type('gr_text_box')
-class TextBox(BBoxMixin):
+class TextBox:
     locked: Flag() = False
     text: str = ''
     start: Named(XYCoord) = None
     end: Named(XYCoord) = None
-    margins: Margins = None
+    pts: PointList = field(default_factory=PointList)
-    pts: PointList = field(default_factory=list)
     angle: OmitDefault(Named(float)) = 0.0
     layer: Named(str) = ""
-    uuid: UUID = field(default_factory=UUID)
     tstamp: Timestamp = None
     effects: TextEffect = field(default_factory=TextEffect)
-    border: Named(YesNoAtom()) = False
     stroke: Stroke = field(default_factory=Stroke)
     render_cache: RenderCache = None
 
@@ -60,7 +53,7 @@ class TextBox(BBoxMixin):
             raise ValueError('Vector font text with empty render cache')
 
         for poly in render_cache.polygons:
-            reg = go.Region([(p.x, -p.y) for p in poly.pts], unit=MM)
+            reg = go.Region([(p.x, -p.y) for p in poly.pts.xy], unit=MM)
 
             if self.stroke:
                 if self.stroke.type not in (None, Atom.default, Atom.solid):
@@ -76,15 +69,13 @@ class TextBox(BBoxMixin):
 
 
 @sexp_type('gr_line')
-class Line(WidthMixin):
+class Line:
-    locked: Flag() = False
     start: Rename(XYCoord) = None
     end: Rename(XYCoord) = None
     angle: Named(float) = None # wat
     layer: Named(str) = None
     width: Named(float) = None
     stroke: Stroke = field(default_factory=Stroke)
-    uuid: UUID = field(default_factory=UUID)
     tstamp: Timestamp = None
 
     def rotate(self, angle, cx=None, cy=None):
@@ -107,26 +98,6 @@ class Line(WidthMixin):
         self.start = self.start.with_offset(x, y)
         self.end = self.end.with_offset(x, y)
 
-    def bounding_box(self, unit=MM):
-        x_min, x_max = min(self.start.x, self.end.x), max(self.start.x, self.end.x)
-        y_min, y_max = min(self.start.y, self.end.y), max(self.start.y, self.end.y)
-        w = self.stroke.width if self.stroke else self.width
-        return (x_min-w, y_max-w), (x_max+w, y_max+w)
-
-
-@sexp_type('target')
-class Target(WidthMixin):
-    shape: AtomChoice(Atom.x, Atom.plus) = 'plus'
-    at: AtPos = field(default_factory=AtPos)
-    size: Rename(XYCoord) = field(default_factory=XYCoord)
-    width: Named(float) = None
-    layer: Named(str) = None
-    uuid: UUID = field(default_factory=UUID)
-    tstamp: Timestamp = None
-
-    def render(self, variables=None):
-        raise NotImplementedError('Target objects are not implemented yet')
-
 
 @sexp_type('fill')
 class FillMode:
@@ -134,7 +105,7 @@ class FillMode:
     fill: AtomChoice(Atom.solid, Atom.yes, Atom.no, Atom.none) = False
 
     @classmethod
-    def __map__(kls, obj, parent=None, path=''):
+    def __map__(kls, obj, parent=None):
         return obj[1] in (Atom.solid, Atom.yes)
 
     @classmethod
@@ -142,15 +113,13 @@ class FillMode:
         yield [Atom.fill, Atom.solid if value else Atom.none]
 
 @sexp_type('gr_rect')
-class Rectangle(BBoxMixin, WidthMixin):
+class Rectangle:
-    locked: Flag() = False
     start: Rename(XYCoord) = None
     end: Rename(XYCoord) = None
     layer: Named(str) = None
     width: Named(float) = None
     stroke: Stroke = field(default_factory=Stroke)
     fill: FillMode = False
-    uuid: UUID = field(default_factory=UUID)
     tstamp: Timestamp = None
 
     def render(self, variables=None):
@@ -161,9 +130,9 @@ class Rectangle(BBoxMixin, WidthMixin):
         if self.fill:
             yield rect
 
-        if (w := self.stroke.width if self.stroke else self.width):
+        if self.width:
             # FIXME stroke support
-            yield from rect.outline_objects(aperture=ap.CircleAperture(w, unit=MM))
+            yield from rect.outline_objects(aperture=ap.CircleAperture(self.width, unit=MM))
 
     @property
     def top_left(self):
@@ -176,24 +145,21 @@ class Rectangle(BBoxMixin, WidthMixin):
 
 
 @sexp_type('gr_circle')
-class Circle(BBoxMixin, WidthMixin):
+class Circle:
-    locked: Flag() = False
     center: Rename(XYCoord) = None
     end: Rename(XYCoord) = None
     layer: Named(str) = None
     width: Named(float) = None
     stroke: Stroke = field(default_factory=Stroke)
     fill: FillMode = False
-    uuid: UUID = field(default_factory=UUID)
     tstamp: Timestamp = None
 
     def render(self, variables=None):
         r = math.dist((self.center.x, -self.center.y), (self.end.x, -self.end.y))
-        w = self.stroke.width if self.stroke else self.width
+        aperture = ap.CircleAperture(self.width or 0, unit=MM)
-        aperture = ap.CircleAperture(w or 0, unit=MM)
         arc = go.Arc.from_circle(self.center.x, -self.center.y, r, aperture=aperture, unit=MM)
 
-        if w:
+        if self.width:
             # FIXME stroke support
             yield arc
 
@@ -204,22 +170,15 @@ class Circle(BBoxMixin, WidthMixin):
         self.center = self.center.with_offset(x, y)
         self.end = self.end.with_offset(x, y)
 
-    def rotate(self, angle, cx=0, cy=0):
-        self.center = self.center.with_rotation(angle, cx, cy)
-        self.end = self.end.with_rotation(angle, cx, cy)
-
 
 @sexp_type('gr_arc')
-class Arc(WidthMixin, BBoxMixin):
+class Arc:
-    locked: Flag() = False
     start: Rename(XYCoord) = None
     mid: Rename(XYCoord) = None
     end: Rename(XYCoord) = None
-    angle: Named(float) = None
     layer: Named(str) = None
     width: Named(float) = None
     stroke: Stroke = field(default_factory=Stroke)
-    uuid: UUID = field(default_factory=UUID)
     tstamp: Timestamp = None
     _: SEXP_END = None
     center: XYCoord = None
@@ -233,35 +192,35 @@ class Arc(WidthMixin, BBoxMixin):
             self.mid = center_arc_to_kicad_mid(XYCoord(self.center), self.start, self.end)
             self.center = None
 
+    def rotate(self, angle, cx=None, cy=None):
+        self.start.x, self.start.y = rotate_point(self.start.x, self.start.y, angle, cx, cy)
+        self.mid.x, self.mid.y = rotate_point(self.mid.x, self.mid.y, angle, cx, cy)
+        self.end.x, self.end.y = rotate_point(self.end.x, self.end.y, angle, cx, cy)
+
     def render(self, variables=None):
-        if not (w := self.stroke.width if self.stroke else self.width):
+        # FIXME stroke support
+        if not self.width:
             return
 
-        aperture = ap.CircleAperture(w, unit=MM)
+        aperture = ap.CircleAperture(self.width, unit=MM)
         x1, y1 = self.start.x, self.start.y
         x2, y2 = self.end.x, self.end.y
-        (cx, cy), _r, clockwise = kicad_mid_to_center_arc(self.mid, self.start, self.end)
+        (cx, cy), _r = kicad_mid_to_center_arc(self.mid, self.start, self.end)
-        yield go.Arc(x1, -y1, x2, -y2, cx-x1, -(cy-y1), aperture=aperture, clockwise=not clockwise, unit=MM)
+        yield go.Arc(x1, -y1, x2, -y2, cx-x1, -(cy-y1), aperture=aperture, clockwise=False, unit=MM)
 
     def offset(self, x=0, y=0):
         self.start = self.start.with_offset(x, y)
         self.mid = self.mid.with_offset(x, y)
         self.end = self.end.with_offset(x, y)
 
-    def rotate(self, angle, cx=None, cy=None):
-        self.start.x, self.start.y = rotate_point(self.start.x, self.start.y, angle, cx, cy)
-        self.mid.x, self.mid.y = rotate_point(self.mid.x, self.mid.y, angle, cx, cy)
-        self.end.x, self.end.y = rotate_point(self.end.x, self.end.y, angle, cx, cy)
-
 
 @sexp_type('gr_poly')
-class Polygon(BBoxMixin, WidthMixin):
+class Polygon:
     pts: ArcPointList = field(default_factory=list)
     layer: Named(str) = None
     width: Named(float) = None
     stroke: Stroke = field(default_factory=Stroke)
     fill: FillMode = True
-    uuid: UUID = field(default_factory=UUID)
     tstamp: Timestamp = None
 
     def render(self, variables=None):
@@ -277,50 +236,41 @@ class Polygon(BBoxMixin, WidthMixin):
             else: # base_types.Arc
                 points.append((point_or_arc.start.x, -point_or_arc.start.y))
                 points.append((point_or_arc.end.x, -point_or_arc.end.y))
-                (cx, cy), _r, clockwise = kicad_mid_to_center_arc(point_or_arc.mid, point_or_arc.start, point_or_arc.end)
+                (cx, cy), _r = kicad_mid_to_center_arc(point_or_arc.mid, point_or_arc.start, point_or_arc.end)
-                centers.append((not clockwise, (cx, -cy)))
+                centers.append((False, (cx, -cy)))
 
         reg = go.Region(points, centers, unit=MM)
         reg.close()
         
-        w = self.stroke.width if self.stroke else self.width
         # FIXME stroke support
-        if w and w >= 0.005:
+        if self.width and self.width >= 0.005 or self.stroke.width and self.stroke.width > 0.005:
-            yield from reg.outline_objects(aperture=ap.CircleAperture(w, unit=MM))
+            yield from reg.outline_objects(aperture=ap.CircleAperture(self.width, unit=MM))
 
         if self.fill:
             yield reg
 
     def offset(self, x=0, y=0):
-        self.pts = [pt.with_offset(x, y) for pt in self.pts]
+        self.pts = PointList([pt.with_offset(x, y) for pt in self.pts])
-
-    def rotate(self, angle, cx=0, cy=0):
-        self.pts = [pt.with_rotation(angle, cx, cy) for pt in self.pts]
 
 
 @sexp_type('gr_curve')
-class Curve(BBoxMixin, WidthMixin):
+class Curve:
-    locked: Flag() = False
+    pts: PointList = field(default_factory=PointList)
-    pts: PointList = field(default_factory=list)
     layer: Named(str) = None
     width: Named(float) = None
-    stroke: Stroke = field(default_factory=Stroke)
-    uuid: UUID = field(default_factory=UUID)
     tstamp: Timestamp = None
 
     def render(self, variables=None):
         raise NotImplementedError('Bezier rendering is not yet supported. Please raise an issue and provide an example file.')
 
     def offset(self, x=0, y=0):
-        self.pts =[pt.with_offset(x, y) for pt in self.pts]
+        self.pts = PointList([pt.with_offset(x, y) for pt in self.pts])
 
 
 @sexp_type('gr_bbox')
 class AnnotationBBox:
     start: Rename(XYCoord) = None
     end: Rename(XYCoord) = None
-    width: Named(float) = None
-    fill: FillMode = False
  
     def render(self, variables=None):
         return []
@@ -339,7 +289,6 @@ class DimensionFormat:
     precision: Named(int) = 7
     override_value: Named(str) = None
     suppress_zeros: Flag() = False
-    suppress_zeroes: Flag() = False
     
 
 @sexp_type('style')
@@ -347,36 +296,19 @@ class DimensionStyle:
     thickness: Named(float) = 0.1
     arrow_length: Named(float) = 1.27
     text_position_mode: Named(int) = 0
-    arrow_direction: Named(AtomChoice(Atom.inward, Atom.outward)) = None
     extension_height: Named(float) = None
     text_frame: Named(float) = None
     extension_offset: Named(float) = None
     keep_text_aligned: Flag() = False
 
 
-@sexp_type('data')
-class Base64Blob:
-    @classmethod
-    def __map__(kls, obj, parent=None, path=''):
-        _data, *content = obj
-        for x in content[:10]:
-            print(str(x))
-        return base64.b64decode(''.join(map(str, content)))
-
-    @classmethod
-    def __sexp__(kls, value):
-        encoded = base64.b64encode(value).decode()
-        yield [Atom.data, *textwrap.wrap(encoded, 76)]
-
-
 @sexp_type('image')
 class Image:
     at: AtPos = field(default_factory=AtPos)
     scale: Named(float) = None
     layer: Named(str) = None
-    locked: Flag() = False
     uuid: UUID = field(default_factory=UUID)
-    data: Base64Blob = ''
+    data: str = ''
 
     def offset(self, x=0, y=0):
         self.at = self.at.with_offset(x, y)
@@ -384,15 +316,12 @@ class Image:
 
 @sexp_type('dimension')
 class Dimension:
-    value: float = None
     locked: Flag() = False
     dimension_type: Named(AtomChoice(Atom.aligned, Atom.leader, Atom.center, Atom.orthogonal, Atom.radial), name='type') = Atom.aligned
     layer: Named(str) = 'Dwgs.User'
-    uuid: UUID = field(default_factory=UUID)
     tstamp: Timestamp = field(default_factory=Timestamp)
-    pts: PointList = field(default_factory=list)
+    pts: PointList = field(default_factory=PointList)
     height: Named(float) = None
-    width: Named(float) = None
     orientation: Named(int) = None
     leader_length: Named(float) = None
     gr_text: Text = None
@@ -403,60 +332,5 @@ class Dimension:
         raise NotImplementedError('Dimension rendering is not yet supported. Please raise an issue.')
 
     def offset(self, x=0, y=0):
-        self.pts = [pt.with_offset(x, y) for pt in self.pts]
+        self.pts = PointList([pt.with_offset(x, y) for pt in self.pts])
-
-
-@sexp_type('options')
-class PadStackLayerOptions:
-    anchor: AtomChoice(Atom.rect, Atom.circle) = Atom.circle
-
-
-@sexp_type('primitives')
-class PadStackPrimitives:
-    vectors: Rename(Line, name='gr_vector') = field(default_factory=list)
-    lines: List(Line) = field(default_factory=list)
-    bboxes: List(AnnotationBBox) = field(default_factory=list)
-    arcs: List(Arc) = field(default_factory=list)
-    circles: List(Circle) = field(default_factory=list)
-    curves: List(Curve) = field(default_factory=list)
-    polygons:List(Polygon) = field(default_factory=list)
-
-
-@sexp_type('layer')
-class PadStackLayer:
-    layer: str = ''
-    shape: Named(AtomChoice(Atom.circle, Atom.rect, Atom.oval, Atom.trapezoid, Atom.roundrect, Atom.custom)) = Atom.circle
-    size: Rename(XYCoord) = field(default_factory=XYCoord)
-    rect_delta: Rename(XYCoord) = None
-    offset: Rename(XYCoord) = None
-    roundrect_rratio: Named(float) = None
-    chamfer_ratio: Named(float) = None
-    chamfer: Chamfer = None
-    primitives: PadStackPrimitives = None
-    options: PadStackLayerOptions = None
-    thermal_bridge_angle: Named(float) = None
-    thermal_gap: Named(float) = None
-    thermal_bridge_width: Named(float) = None
-    clearance: Named(float) = None
-    zone_connect: Named(int) = None
-
-
-@sexp_type('padstack')
-class PadStack:
-    mode: Named(AtomChoice('front_inner_back', 'custom')) = Atom.front_inner_back
-    layers: List(PadStackLayer) = field(default_factory=list)
-
-
-@sexp_type('teardrops')
-class TeardropSpec:
-    best_length_ratio: Named(float) = 1.0
-    max_length: Named(float) = 2.0
-    best_width_ratio: Named(float) = 1.0
-    max_width: Named(float) = 2.0
-    curve_points: Named(int) = 0
-    filter_ratio: Named(float) = 0.9
-    enabled: Named(YesNoAtom()) = True
-    allow_two_segments: Named(YesNoAtom()) = True
-    prefer_zone_connections: Named(YesNoAtom()) = True
-
 

gerbonara/cad/kicad/pcb.py

@@ -59,22 +59,13 @@ def gn_layer_to_kicad(layer, flip=False):
 @sexp_type('general')
 class GeneralSection:
     thickness: Named(float) = 1.60
-    legacy_teardrops: Named(YesNoAtom()) = False
-    drawings: Named(int) = None
-    tracks: Named(int) = None
-    zones: Named(int) = None
-    modules: Named(int) = None
-    nets: Named(int) = None
-    links: Named(int) = None
-    no_connects: Named(int) = None
-    area: Named(Array(float)) = None
 
 
 @sexp_type('layers')
 class LayerSettings:
     index: int = 0
     canonical_name: str = None
-    layer_type: AtomChoice(Atom.jumper, Atom.mixed, Atom.power, Atom.signal, Atom.user, Atom.auxiliary) = Atom.signal
+    layer_type: AtomChoice(Atom.jumper, Atom.mixed, Atom.power, Atom.signal, Atom.user) = Atom.signal
     custom_name: str = None
 
 
@@ -100,29 +91,76 @@ class StackupSettings:
     castellated_pads: Named(YesNoAtom()) = None
     edge_plating: Named(YesNoAtom()) = None
 
+
+TFBool = YesNoAtom(yes=Atom.true, no=Atom.false)
+
+@sexp_type('pcbplotparams')
+class ExportSettings:
+    layerselection: Named(Atom) = None
+    plot_on_all_layers_selection: Named(Atom) = None
+    disableapertmacros: Named(TFBool) = False
+    usegerberextensions: Named(TFBool) = True
+    usegerberattributes: Named(TFBool) = True
+    usegerberadvancedattributes: Named(TFBool) = True
+    creategerberjobfile: Named(TFBool) = True
+    dashed_line_dash_ratio: Named(float) = 12.0
+    dashed_line_gap_ratio: Named(float) = 3.0
+    svguseinch: Named(TFBool) = False
+    svgprecision: Named(float) = 4
+    excludeedgelayer: Named(TFBool) = False
+    plotframeref: Named(TFBool) = False
+    viasonmask: Named(TFBool) = False
+    mode: Named(int) = 1
+    useauxorigin: Named(TFBool) = False
+    hpglpennumber: Named(int) = 1
+    hpglpenspeed: Named(int) = 20
+    hpglpendiameter: Named(float) = 15.0
+    pdf_front_fp_property_popups: Named(TFBool) = True
+    pdf_back_fp_property_popups: Named(TFBool) = True
+    dxfpolygonmode: Named(TFBool) = True
+    dxfimperialunits: Named(TFBool) = False
+    dxfusepcbnewfont: Named(TFBool) = True
+    psnegative: Named(TFBool) = False
+    psa4output: Named(TFBool) = False
+    plotreference: Named(TFBool) = True
+    plotvalue: Named(TFBool) = True
+    plotinvisibletext: Named(TFBool) = False
+    sketchpadsonfab: Named(TFBool) = False
+    subtractmaskfromsilk: Named(TFBool) = False
+    outputformat: Named(int) = 1
+    mirror: Named(TFBool) = False
+    drillshape: Named(int) = 0
+    scaleselection: Named(int) = 1
+    outputdirectory: Named(str) = "gerber"
+
+
 @sexp_type('setup')
 class BoardSetup:
-    @classmethod
+    stackup: OmitDefault(StackupSettings) = field(default_factory=StackupSettings)
-    def __map__(kls, obj, parent=None, path=''):
+    pad_to_mask_clearance: Named(float) = None
-        return obj
+    solder_mask_min_width: Named(float) = None
+    pad_to_past_clearance: Named(float) = None
+    pad_to_paste_clearance_ratio: Named(float) = None
+    aux_axis_origin: Rename(XYCoord) = None
+    grid_origin: Rename(XYCoord) = None
+    export_settings: ExportSettings = field(default_factory=ExportSettings)
 
-    @classmethod
+
-    def __sexp__(kls, value):
+@sexp_type('net')
-        yield value
+class Net:
+    index: int = 0
+    name: str = ''
 
 
 @sexp_type('segment')
-class TrackSegment(BBoxMixin):
+class TrackSegment:
     start: Rename(XYCoord) = field(default_factory=XYCoord)
     end: Rename(XYCoord) = field(default_factory=XYCoord)
     width: Named(float) = 0.5
-    locked: Flag() = False
     layer: Named(str) = 'F.Cu'
-    extra_layers: Named(Array(str), name='layers') = field(default_factory=list)
+    locked: Flag() = False
-    solder_mask_margin: Named(float) = None
     net: Named(int) = 0
-    uuid: UUID = field(default_factory=UUID)
+    tstamp: Timestamp = field(default_factory=Timestamp)
-    tstamp: Timestamp = None
 
     @classmethod
     def from_footprint_line(kls, line, flip=False):
@@ -133,15 +171,6 @@ class TrackSegment(BBoxMixin):
         self.start = XYCoord(self.start)
         self.end = XYCoord(self.end)
 
-    def __after_parse__(self, parent):
-        if self.extra_layers:
-            self.layer, *self.extra_layers = self.extra_layers
-
-    def __before_sexp__(self):
-        if self.extra_layers:
-            self.extra_layers.insert(0, self.layer)
-            self.layer = None
-
     @property
     def layer_mask(self):
         return layer_mask([self.layer])
@@ -166,7 +195,7 @@ class TrackSegment(BBoxMixin):
 
 
 @sexp_type('arc')
-class TrackArc(BBoxMixin):
+class TrackArc:
     start: Rename(XYCoord) = field(default_factory=XYCoord)
     mid: Rename(XYCoord) = field(default_factory=XYCoord)
     end: Rename(XYCoord) = field(default_factory=XYCoord)
@@ -174,15 +203,14 @@ class TrackArc(BBoxMixin):
     layer: Named(str) = 'F.Cu'
     locked: Flag() = False
     net: Named(int) = 0
-    uuid: UUID = field(default_factory=UUID)
+    tstamp: Timestamp = field(default_factory=Timestamp)
-    tstamp: Timestamp = None
     _: SEXP_END = None
     center: XYCoord = None
 
     def __post_init__(self):
         self.start = XYCoord(self.start)
         self.end = XYCoord(self.end)
-        self.mid = XYCoord(self.mid) if self.center is None else center_arc_to_kicad_mid(XYCoord(self.center), self.start, self.end)
+        self.mid = XYCoord(self.mid) if self.mid else center_arc_to_kicad_mid(XYCoord(self.center), self.start, self.end)
         self.center = None
 
     @property
@@ -210,31 +238,19 @@ class TrackArc(BBoxMixin):
         self.end = self.end.with_offset(x, y)
 
 
-@sexp_type('tenting')
-class Tenting:
-    front: Flag() = False
-    back: Flag() = False
-    none: Flag() = False
-
-
 @sexp_type('via')
-class Via(BBoxMixin):
+class Via:
     via_type: AtomChoice(Atom.blind, Atom.micro) = None
     locked: Flag() = False
     at: Rename(XYCoord) = field(default_factory=XYCoord)
     size: Named(float) = 0.8
     drill: Named(float) = 0.4
     layers: Named(Array(str)) = field(default_factory=lambda: ['F.Cu', 'B.Cu'])
-    teardrops: gr.TeardropSpec = None
-    tenting: Tenting = None
-    padstack: gr.PadStack = None
     remove_unused_layers: Flag() = False
     keep_end_layers: Flag() = False
-    free: Named(YesNoAtom()) = False
+    free: Wrap(Flag()) = False
-    zone_layer_connections: Named(Array(str)) = field(default_factory=list)
     net: Named(int) = 0
-    uuid: UUID = field(default_factory=UUID)
+    tstamp: Timestamp = field(default_factory=Timestamp)
-    tstamp: Timestamp = None
 
     @classmethod
     def from_pad(kls, pad):
@@ -287,70 +303,22 @@ class Via(BBoxMixin):
         self.at = self.at.with_offset(x, y)
 
 
-@sexp_type('net_class')
+SUPPORTED_FILE_FORMAT_VERSIONS = [20210108, 20211014, 20221018, 20230517]
-class LegacyNetclass:
-    name: str = ''
-    description: str = ''
-    clearance: Named(float) = None
-    trace_width: Named(float) = None
-    via_dia: Named(float) = None
-    via_drill: Named(float) = None
-    uvia_dia: Named(float) = None
-    uvia_drill: Named(float) = None
-    diff_pair_width: Named(float) = None
-    diff_pair_gap: Named(float) = None
-    nets: Rename(List(Named(str)), name='add_net') = field(default_factory=list)
-
-
-@sexp_type('generated')
-class GeneratedPatterns:
-    type: Named(Atom) = ''
-    name: Named(str) = ''
-    layer: Named(str) = ''
-    locked: Flag() = False
-    members: Named(Array(Atom), name='members') = field(default_factory=list)
-    _ : SEXP_END = None
-    params: dict = field(default_factory=dict)
-
-    def __catchall__(self, sexp_value, path=''):
-        key, value = sexp_value
-        self.params[key] = value
-
-    @classmethod
-    def __sexp__(kls, value):
-        return [kls.name_atom,
-             ['type', value.type],
-             ['name', value.name],
-             ['layer', value.layer],
-             ['locked', ('true' if value.locked else 'false')],
-             *[[k, v] for k, v in value.params.items()],
-             ['members', *value.members]]
-
-
-
-SUPPORTED_FILE_FORMAT_VERSIONS = [20200119, 20200512, 20210108, 20211014, 20220621, 20221018, 20230517, 20240706, 20240922, 20241229]
 @sexp_type('kicad_pcb')
 class Board:
     _version: Named(int, name='version') = 20230517
-    generator: Named(str) = Atom.gerbonara
+    generator: Named(Atom) = Atom.gerbonara
-    generator_version: Named(str) = Atom.gerbonara
-    legacy_generator: Named(Array(str), name='host') = None
     general: GeneralSection = None
-    paper: PageSettings = None
+    page: PageSettings = None
-    legacy_page: Rename(PageSettings, 'page') = None
-    title_block: TitleBlock = None
     layers: Named(Array(Untagged(LayerSettings))) = field(default_factory=list)
     setup: BoardSetup = field(default_factory=BoardSetup)
     properties: List(Property) = field(default_factory=list)
     nets: List(Net) = field(default_factory=list)
-    legacy_netclasses: List(LegacyNetclass) = field(default_factory=list)
     footprints: List(Footprint) = field(default_factory=list)
-    legacy_footprints: Rename(List(Footprint), 'module') = field(default_factory=list)
     # Graphical elements
     texts: List(gr.Text) = field(default_factory=list)
     text_boxes: List(gr.TextBox) = field(default_factory=list)
     lines: List(gr.Line) = field(default_factory=list)
-    targets: List(gr.Target) = field(default_factory=list)
     rectangles: List(gr.Rectangle) = field(default_factory=list)
     circles: List(gr.Circle) = field(default_factory=list)
     arcs: List(gr.Arc) = field(default_factory=list)
@@ -365,11 +333,10 @@ class Board:
     # Other stuff
     zones: List(Zone) = field(default_factory=list)
     groups: List(Group) = field(default_factory=list)
-    generated_patterns: List(GeneratedPatterns) = field(default_factory=list)
-    embedded_fonts: Named(YesNoAtom()) = False
 
     _ : SEXP_END = None
     original_filename: str = None
+    _bounding_box: tuple = None
     _trace_index: rtree.index.Index = None
     _trace_index_map: dict = None
 
@@ -408,15 +375,15 @@ class Board:
             (47, 'F.CrtYd', 'user', 'F.Courtyard'),
             (48, 'B.Fab', 'user', None),
             (49, 'F.Fab', 'user', None),
-            (50, 'User.1', 'auxiliary', None),
+            (50, 'User.1', 'user', None),
-            (51, 'User.2', 'auxiliary', None),
+            (51, 'User.2', 'user', None),
-            (52, 'User.3', 'auxiliary', None),
+            (52, 'User.3', 'user', None),
-            (53, 'User.4', 'auxiliary', None),
+            (53, 'User.4', 'user', None),
-            (54, 'User.5', 'auxiliary', None),
+            (54, 'User.5', 'user', None),
-            (55, 'User.6', 'auxiliary', None),
+            (55, 'User.6', 'user', None),
-            (56, 'User.7', 'auxiliary', None),
+            (56, 'User.7', 'user', None),
-            (57, 'User.8', 'auxiliary', None),
+            (57, 'User.8', 'user', None),
-            (58, 'User.9', 'auxiliary', None)]]
+            (58, 'User.9', 'user', None)]]
 
 
     def rebuild_trace_index(self):
@@ -532,8 +499,6 @@ class Board:
             fp.board = self
 
         self.nets = {net.index: net.name for net in self.nets}
-        if self.legacy_page:
-            self.paper, self.legacy_page = self.legacy_page, None
 
 
     def __before_sexp__(self):
@@ -695,11 +660,11 @@ class Board:
         for fp in self.footprints:
             if name and not match_filter(name, fp.name):
                 continue
-            if value and not match_filter(value, fp.value):
+            if value and not match_filter(value, fp.properties.get('value', '')):
                 continue
-            if reference and not match_filter(reference, fp.reference):
+            if reference and not match_filter(reference, fp.properties.get('reference', '')):
                 continue
-            if net and not any(pad.net and match_filter(net, pad.net.name) for pad in fp.pads):
+            if net and not any(match_filter(net, pad.net.name) for pad in fp.pads):
                 continue
             if sheetname and not match_filter(sheetname, fp.sheetname):
                 continue
@@ -815,6 +780,15 @@ class Board:
                 fe.offset(x, -y, MM)
                 layer_stack.drill_pth.append(fe)
 
+    def bounding_box(self, unit=MM):
+        if not self._bounding_box:
+            stack = LayerStack()
+            layer_map = {kc_id: gn_id for kc_id, gn_id in LAYER_MAP_K2G.items() if gn_id in stack}
+            self.render(stack, layer_map, x=0, y=0, rotation=0, flip=False, text=False, variables={})
+            self._bounding_box = stack.bounding_box(unit)
+        return self._bounding_box
+
+ 
 @dataclass
 class BoardInstance(cad_pr.Positioned):
     sexp: Board = None

gerbonara/cad/kicad/primitives.py

@@ -38,7 +38,7 @@ def layer_mask(layers):
             case 'B.Cu':
                 mask |= 1<<31
             case _:
-                if (m := re.match(fr'In([0-9]+)\.Cu', layer)):
+                if (m := re.match(f'In([0-9]+)\.Cu', layer)):
                     mask |= 1<<int(m.group(1))
     return mask
 
@@ -62,8 +62,6 @@ def center_arc_to_kicad_mid(center, start, end):
 def kicad_mid_to_center_arc(mid, start, end):
     """ Convert kicad's slightly insane midpoint notation to standrad center/p1/p2 notation.
 
-    returns a ((center_x, center_y), radius, clockwise) tuple in KiCad coordinates.
-
     Returns the center and radius of the circle passing the given 3 points.
     In case the 3 points form a line, raises a ValueError.
     """
@@ -83,7 +81,7 @@ def kicad_mid_to_center_arc(mid, start, end):
     cy = ((p1[0] - p2[0]) * cd - (p2[0] - p3[0]) * bc) / det
 
     radius = math.sqrt((cx - p1[0])**2 + (cy - p1[1])**2)
-    return (cx, cy), radius, det < 0
+    return ((cx, cy), radius)
 
 
 @sexp_type('hatch')
@@ -94,7 +92,7 @@ class Hatch:
 
 @sexp_type('connect_pads')
 class PadConnection:
-    type: AtomChoice(Atom.yes, Atom.thru_hole_only, Atom.full, Atom.no) = None
+    type: AtomChoice(Atom.thru_hole_only, Atom.full, Atom.no) = None
     clearance: Named(float) = 0
 
 
@@ -120,7 +118,6 @@ class ZoneFill:
     thermal_gap: Named(float) = 0.508
     thermal_bridge_width: Named(float) = 0.508
     smoothing: ZoneSmoothing = None
-    radius: Named(float) = 0.125
     island_removal_mode: Named(int) = None
     island_area_min: Named(float) = None
     hatch_thickness: Named(float) = None
@@ -136,54 +133,34 @@ class ZoneFill:
 class FillPolygon:
     layer: Named(str) = ""
     island: Wrap(Flag()) = False
-    pts: ArcPointList = field(default_factory=list)
+    pts: PointList = field(default_factory=PointList)
 
 
 @sexp_type('fill_segments')
 class FillSegment:
     layer: Named(str) = ""
-    pts: ArcPointList = field(default_factory=list)
+    pts: PointList = field(default_factory=PointList)
 
 
 @sexp_type('polygon')
 class ZonePolygon:
-    pts: ArcPointList = field(default_factory=list)
+    pts: PointList = field(default_factory=PointList)
-
-
-@sexp_type('placement')
-class ZonePlacement:
-    enabled: Named(YesNoAtom()) = False
-    sheetname: Named(str) = ''
-
-
-@sexp_type('teardrop')
-class ZoneTeardropSpec:
-    type: Named(AtomChoice(Atom.padvia, Atom.track_end)) = Atom.padvia
-
-
-@sexp_type('attr')
-class ZoneAttr:
-    teardrop: ZoneTeardropSpec = None
 
 
 @sexp_type('zone')
 class Zone:
-    locked: Flag() = False
     net: Named(int) = 0
     net_name: Named(str) = ""
     layer: Named(str) = None
     layers: Named(Array(str)) = None
-    uuid: UUID = field(default_factory=UUID)
     tstamp: Timestamp = None
     name: Named(str) = None
     hatch: Hatch = None
     priority: OmitDefault(Named(int)) = 0
-    attr: ZoneAttr = None
     connect_pads: PadConnection = field(default_factory=PadConnection)
     min_thickness: Named(float) = 0.254
     filled_areas_thickness: Named(YesNoAtom()) = True
     keepout: ZoneKeepout = None
-    placement: ZonePlacement = None
     fill: ZoneFill = field(default_factory=ZoneFill)
     polygon: ZonePolygon = field(default_factory=ZonePolygon)
     fill_polygons: List(FillPolygon) = field(default_factory=list)
@@ -200,26 +177,10 @@ class Zone:
         self.fill_polygons = []
         self.fill_segments = []
 
-    def rotate(self, angle, cx=None, cy=None):
-        self.unfill()
-        self.polygon.pts = [pt.with_rotation(angle, cx, cy) for pt in self.polygon.pts]
-
-    def offset(self, x=0, y=0):
-        self.unfill()
-        self.polygon.pts = [pt.with_offset(x, y) for pt in self.polygon.pts]
-
-
-    def bounding_box(self):
-        min_x = min(pt.x for pt in self.polygon.pts)
-        min_y = min(pt.y for pt in self.polygon.pts)
-        max_x = max(pt.x for pt in self.polygon.pts)
-        max_y = max(pt.y for pt in self.polygon.pts)
-        return (min_x, min_y), (max_x, max_y)
-
 
 @sexp_type('polygon')
 class RenderCachePolygon:
-    pts: PointList = field(default_factory=list)
+    pts: PointList = field(default_factory=PointList)
 
 
 @sexp_type('render_cache')
@@ -229,39 +190,4 @@ class RenderCache:
     polygons: List(RenderCachePolygon) = field(default_factory=list)
 
 
-@sexp_type('margins')
-class Margins:
-    left: float = 0.0
-    top: float = 0.0
-    right: float = 0.0
-    bottom: float = 0.0
-
-
-@sexp_type('comment')
-class TitleComment:
-    @classmethod
-    def __map__(kls, obj, parent=None, path=''):
-        lines = []
-        for lineno, content in zip(obj[1::2], obj[2::2]):
-            while lineno > len(lines):
-                lines.append('')
-            lines[lineno-1] = content
-
-    @classmethod
-    def __sexp__(kls, value):
-        l = [Atom.comment]
-        for i, line in enumerate(value.splitlines(), start=1):
-            l.append(i)
-            l.append(line.rstrip('\n'))
-        return l
-
-
-@sexp_type('title_block')
-class TitleBlock:
-    title: Named(str) = ''
-    date: Named(str) = ''
-    rev: Named(str) = ''
-    company: Named(str) = ''
-    comment: TitleComment = None
-
 

gerbonara/cad/kicad/schematic.py

@@ -19,7 +19,6 @@ from .symbols import Symbol
 from . import graphical_primitives as gr
 
 from .. import primitives as cad_pr
-from ... import __version__
 
 from ... import graphic_primitives as gp
 from ... import graphic_objects as go
@@ -85,12 +84,6 @@ class NoConnect:
                    fill='none', stroke_width='0.254', stroke=colorscheme.no_connect)
 
 
-@sexp_type('bus_alias')
-class BusAlias:
-    name: str = ''
-    members: Named(Array(str)) = field(default_factory=list)
-
-
 @sexp_type('bus_entry')
 class BusEntry:
     at: AtPos = field(default_factory=AtPos)
@@ -139,7 +132,7 @@ def _polyline_bounds(self):
 
 @sexp_type('wire')
 class Wire:
-    points: PointList = field(default_factory=list)
+    points: PointList = field(default_factory=PointList)
     stroke: Stroke = field(default_factory=Stroke)
     uuid: UUID = field(default_factory=UUID)
 
@@ -152,7 +145,7 @@ class Wire:
 
 @sexp_type('bus')
 class Bus:
-    points: PointList = field(default_factory=list)
+    points: PointList = field(default_factory=PointList)
     stroke: Stroke = field(default_factory=Stroke)
     uuid: UUID = field(default_factory=UUID)
 
@@ -165,9 +158,8 @@ class Bus:
 
 @sexp_type('polyline')
 class Polyline:
-    points: PointList = field(default_factory=list)
+    points: PointList = field(default_factory=PointList)
     stroke: Stroke = field(default_factory=Stroke)
-    fill: OmitDefault(Fill) = None
     uuid: UUID = field(default_factory=UUID)
 
     def bounding_box(self, default=None):
@@ -177,23 +169,33 @@ class Polyline:
         yield _polyline_svg(self, colorscheme.lines)
 
 
-@sexp_type('circle')
+@sexp_type('text')
-class Circle:
+class Text(TextMixin):
-    center: Rename(XYCoord) = field(default_factory=XYCoord)
+    text: str = ''
-    radius: Named(float) = 0.0
+    exclude_from_sim: Named(YesNoAtom()) = True
-    stroke: Stroke = field(default_factory=Stroke)
+    at: AtPos = field(default_factory=AtPos)
-    fill: OmitDefault(Fill) = None
+    effects: TextEffect = field(default_factory=TextEffect)
     uuid: UUID = field(default_factory=UUID)
 
+    def to_svg(self, colorscheme=Colorscheme.KiCad):
+        yield from TextMixin.to_svg(self, colorscheme.text)
 
-@sexp_type('rectangle')
+
-class Rectangle:
+@sexp_type('label')
-    start: Rename(XYCoord) = field(default_factory=XYCoord)
+class LocalLabel(TextMixin):
-    end: Rename(XYCoord) = field(default_factory=XYCoord)
+    text: str = ''
-    stroke: Stroke = field(default_factory=Stroke)
+    at: AtPos = field(default_factory=AtPos)
-    fill: OmitDefault(Fill) = None
+    fields_autoplaced: Wrap(Flag()) = False
+    effects: TextEffect = field(default_factory=TextEffect)
     uuid: UUID = field(default_factory=UUID)
 
+    @property
+    def _text_offset(self):
+        return (0, -2*self.line_width)
+
+    def to_svg(self, colorscheme=Colorscheme.KiCad):
+        yield from TextMixin.to_svg(self, colorscheme.labels)
+
 
 def label_shape_path_d(shape, w, h):
     l, r = {
@@ -218,36 +220,16 @@ def label_shape_path_d(shape, w, h):
         return d + f'L {e+r:.3f} {0:.3f} L {e:.3f} {r:.3f} Z'
 
 
-@dataclass
+@sexp_type('global_label')
-class TextLabel(TextMixin):
+class GlobalLabel(TextMixin):
     text: str = ''
-    shape: Named(AtomChoice(Atom.input, Atom.output, Atom.bidirectional, Atom.tri_state, Atom.passive, Atom.dot, Atom.round, Atom.diamond, Atom.rectangle)) = Atom.passive
+    shape: Named(AtomChoice(Atom.input, Atom.output, Atom.bidirectional, Atom.tri_state, Atom.passive)) = Atom.input
-    exclude_from_sim: Named(YesNoAtom()) = False
     at: AtPos = field(default_factory=AtPos)
-    fields_autoplaced: Named(YesNoAtom()) = False
+    fields_autoplaced: Wrap(Flag()) = False
     effects: TextEffect = field(default_factory=TextEffect)
     uuid: UUID = field(default_factory=UUID)
-    properties: List(DrawnProperty) = field(default_factory=list)
+    properties: List(Property) = field(default_factory=list)
 
-
-@sexp_type('text')
-class Text(TextLabel):
-    def to_svg(self, colorscheme=Colorscheme.KiCad):
-        yield from TextMixin.to_svg(self, colorscheme.text)
-
-
-@sexp_type('label')
-class LocalLabel(TextLabel):
-    @property
-    def _text_offset(self):
-        return (0, -2*self.line_width)
-
-    def to_svg(self, colorscheme=Colorscheme.KiCad):
-        yield from TextMixin.to_svg(self, colorscheme.labels)
-
-
-@sexp_type('global_label')
-class GlobalLabel(TextLabel):
     def to_svg(self, colorscheme=Colorscheme.KiCad):
         text = super(TextMixin, self).to_svg(colorscheme.labels),
         text.attrs['transform'] = f'translate({self.size*0.6:.3f} 0)'
@@ -258,7 +240,14 @@ class GlobalLabel(TextLabel):
 
 
 @sexp_type('hierarchical_label')
-class HierarchicalLabel(TextLabel):
+class HierarchicalLabel(TextMixin):
+    text: str = ''
+    shape: Named(AtomChoice(Atom.input, Atom.output, Atom.bidirectional, Atom.tri_state, Atom.passive)) = Atom.input
+    at: AtPos = field(default_factory=AtPos)
+    fields_autoplaced: Wrap(Flag()) = False
+    effects: TextEffect = field(default_factory=TextEffect)
+    uuid: UUID = field(default_factory=UUID)
+
     def to_svg(self, colorscheme=Colorscheme.KiCad):
         text, = TextMixin.to_svg(self, colorscheme.labels),
         text.attrs['transform'] = f'translate({self.size*1.2:.3f} 0)'
@@ -267,20 +256,10 @@ class HierarchicalLabel(TextLabel):
         yield Tag('g', children=[frame, text])
 
 
-@sexp_type('netclass_flag')
-class NetclassFlag(TextLabel):
-    length: Named(float) = 2.54
-
-    def to_svg(self, colorscheme=Colorscheme.KiCad):
-        # FIXME
-        yield from TextMixin.to_svg(self, colorscheme.text)
-
-
 @sexp_type('pin')
 class Pin:
     name: str = '1'
     uuid: UUID = field(default_factory=UUID)
-    alternate: Named(str) = None
 
 
 # Suddenly, we're doing syntax like this is yaml or something.
@@ -289,8 +268,6 @@ class SymbolCrosslinkSheet:
     path: str = ''
     reference: Named(str) = ''
     unit: Named(int) = 1
-    value: OmitDefault(Named(str)) = None
-    footprint: OmitDefault(Named(str)) = None
 
 
 @sexp_type('project')
@@ -309,7 +286,6 @@ class MirrorFlags:
 class DrawnProperty(TextMixin):
     key: str = None
     value: str = None
-    id: Named(int) = None
     at: AtPos = field(default_factory=AtPos)
     hide: Flag() = False
     effects: TextEffect = field(default_factory=TextEffect)
@@ -359,14 +335,6 @@ class DrawnProperty(TextMixin):
             yield from TextMixin.to_svg(self, colorscheme.values)
 
 
-@sexp_type('default_instance')
-class DefaultSymbolInstance:
-    reference: Named(str) = ''
-    unit: Named(int) = 1
-    value: Named(str) = ''
-    footprint: Named(str) = ''
-
-
 @sexp_type('symbol')
 class SymbolInstance:
     name: str = None
@@ -379,17 +347,16 @@ class SymbolInstance:
     in_bom: Named(YesNoAtom()) = True
     on_board: Named(YesNoAtom()) = True
     dnp: Named(YesNoAtom()) = True
-    fields_autoplaced: Named(YesNoAtom()) = True
+    fields_autoplaced: Wrap(Flag()) = True
     uuid: UUID = field(default_factory=UUID)
-    default_instance: DefaultSymbolInstance = None
     properties: List(DrawnProperty) = field(default_factory=list)
     # AFAICT this property is completely redundant.
     pins: List(Pin) = field(default_factory=list)
     # AFAICT this property, too,  is completely redundant. It ultimately just lists paths and references of at most
     # three other uses of the same symbol in this schematic.
-    instances: Named(Array(SymbolCrosslinkProject)) = field(default_factory=list)
+    instances: Named(List(SymbolCrosslinkProject)) = field(default_factory=list)
     _ : SEXP_END = None
-    schematic: object = field(repr=False, default=None)
+    schematic: object = None
 
     def __after_parse__(self, parent):
         self.schematic = parent
@@ -517,11 +484,7 @@ class SubsheetFill:
 class Subsheet:
     at: Rename(XYCoord) = field(default_factory=XYCoord)
     size: Rename(XYCoord) = field(default_factory=lambda: XYCoord(2.54, 2.54))
-    exclude_from_sim: Named(YesNoAtom()) = False
+    fields_autoplaced: Wrap(Flag()) = True
-    in_bom: Named(YesNoAtom()) = False
-    on_board: Named(YesNoAtom()) = False
-    dnp: Named(YesNoAtom()) = False
-    fields_autoplaced: Named(YesNoAtom()) = True
     stroke: Stroke = field(default_factory=Stroke)
     fill: SubsheetFill = field(default_factory=SubsheetFill)
     uuid: UUID = field(default_factory=UUID)
@@ -532,10 +495,10 @@ class Subsheet:
     _ : SEXP_END = None
     sheet_name: object = field(default_factory=lambda: DrawnProperty('Sheetname', ''))
     file_name: object = field(default_factory=lambda: DrawnProperty('Sheetfile', ''))
-    schematic: object = field(repr=False, default=None)
+    schematic: object = None
 
     def __after_parse__(self, parent):
-        self.sheet_name, self.file_name, *_extra_params = self._properties
+        self.sheet_name, self.file_name = self._properties
         self.schematic = parent
 
     def __before_sexp__(self):
@@ -580,28 +543,6 @@ class Subsheet:
                   **self.stroke.svg_attrs(colorscheme.lines))
 
 
-@sexp_type('rule_area')
-class RuleArea:
-    polyline: Polyline = None
-
-
-@sexp_type('text_box')
-class TextBox(TextMixin):
-    text: str = None
-    exclude_from_sim: Named(YesNoAtom()) = False
-    at: AtPos = field(default_factory=AtPos)
-    size: Rename(XYCoord) = None
-    margins: Rename(gr.Margins) = None
-    effects: TextEffect = field(default_factory=TextEffect)
-    stroke: Stroke = field(default_factory=Stroke)
-    fill: OmitDefault(Fill) = None
-    effects: TextEffect = field(default_factory=TextEffect)
-    uuid: UUID = field(default_factory=UUID)
-
-    def render(self, variables={}, cache=None):
-        yield from gr.TextBox.render(self, variables=variables)
-
-
 @sexp_type('lib_symbols')
 class LocalLibrary:
     symbols: List(Symbol) = field(default_factory=list)
@@ -611,39 +552,26 @@ SUPPORTED_FILE_FORMAT_VERSIONS = [20230620]
 @sexp_type('kicad_sch')
 class Schematic:
     _version: Named(int, name='version') = 20230620
-    generator: Named(str) = 'gerbonara'
+    generator: Named(Atom) = Atom.gerbonara
-    generator_version: Named(str) = __version__
-    legacy_generator: Named(Array(str), name='host') = None
     uuid: UUID = field(default_factory=UUID)
     page_settings: PageSettings = field(default_factory=PageSettings)
-    legacy_page: Named(Array(int), name='page') = None
-    legacy_paper: Named(str, name='paper') = None
-    title_block: TitleBlock = None
     # The doc says this is expected, but eeschema barfs when it's there.
     # path: SheetPath = field(default_factory=SheetPath)
     lib_symbols: LocalLibrary = field(default_factory=list)
     junctions: List(Junction) = field(default_factory=list)
     no_connects: List(NoConnect) = field(default_factory=list)
-    rule_areas: List(RuleArea) = field(default_factory=list)
-    netclass_flags: List(NetclassFlag) = field(default_factory=list)
-    bus_aliases: List(BusAlias) = field(default_factory=list)
     bus_entries: List(BusEntry) = field(default_factory=list)
     wires: List(Wire) = field(default_factory=list)
     buses: List(Bus) = field(default_factory=list)
     images: List(gr.Image) = field(default_factory=list)
     polylines: List(Polyline) = field(default_factory=list)
-    circles: List(Circle) = field(default_factory=list)
-    rectangles: List(Rectangle) = field(default_factory=list)
     texts: List(Text) = field(default_factory=list)
-    text_boxes: List(TextBox) = field(default_factory=list)
     local_labels: List(LocalLabel) = field(default_factory=list)
     global_labels: List(GlobalLabel) = field(default_factory=list)
     hierarchical_labels: List(HierarchicalLabel) = field(default_factory=list)
     symbols: List(SymbolInstance) = field(default_factory=list)
     subsheets: List(Subsheet) = field(default_factory=list)
-    sheet_instances: Named(Array(SubsheetCrosslinkSheet)) = field(default_factory=list)
+    sheet_instances: Named(List(SubsheetCrosslinkSheet)) = field(default_factory=list)
-    symbol_instances: Named(Array(SymbolCrosslinkProject)) = field(default_factory=list)
-    embedded_fonts: Named(YesNoAtom()) = False
     _ : SEXP_END = None
     original_filename: str = None
 

gerbonara/cad/kicad/sexp.py

@@ -64,7 +64,7 @@ term_regex = r"""(?mx)
         (\))|
         ([+-]?\d+\.\d+(?=[\s\)]))|
         (\-?\d+(?=[\s\)]))|
-        ([^"\s()][^"\s)]*)
+        ([^0-9"\s()][^"\s)]*)
        )"""
 
 

gerbonara/cad/kicad/sexp_mapper.py

@@ -28,10 +28,6 @@ class AtomChoice:
     def __sexp__(self, value):
         yield value
 
-    def __str__(self):
-        choices = '|'.join(map(str, self.choices))
-        return f'AtomChoice({choices})'
-
 
 class Flag:
     def __init__(self, atom=None, invert=None):
@@ -52,11 +48,6 @@ class Flag:
     def __sexp__(self, value):
         if bool(value) == (not self.invert):
             yield self.atom
-    
-    def __str__(self):
-        if self.invert is not None:
-            return f'Flag({self.atom}/{self.invert})'
-        return f'Flag({self.atom})'
 
 
 def sexp(t, v):
@@ -85,7 +76,7 @@ class MappingError(TypeError):
         super().__init__(msg)
         self.t, self.sexp = t, sexp
 
-def map_sexp(t, v, parent=None, path=''):
+def map_sexp(t, v, parent=None):
     try:
         if t is not Atom and hasattr(t, '__map__'):
             return t.__map__(v, parent=parent)
@@ -102,7 +93,7 @@ def map_sexp(t, v, parent=None, path=''):
 
         elif isinstance(t, list):
             t, = t
-            return [map_sexp(t, elem, parent=parent, path=f'{path}/{t}') for elem in v]
+            return [map_sexp(t, elem, parent=parent) for elem in v]
 
         else:
             raise TypeError(f'Python type {t} has no defined s-expression deserialization')
@@ -111,7 +102,7 @@ def map_sexp(t, v, parent=None, path=''):
         raise e
 
     except Exception as e:
-        raise MappingError(f'Error at {path} trying to map {textwrap.shorten(str(v), width=60)} into type {t}', t, v) from e
+        raise MappingError(f'Error trying to map {textwrap.shorten(str(v), width=120)} into type {t}', t, v) from e
 
 
 class WrapperType:
@@ -120,8 +111,7 @@ class WrapperType:
 
     def __bind_field__(self, field):
         self.field = field
-        if self.next_type is not Atom:
+        getattr(self.next_type, '__bind_field__', lambda x: None)(field)
-            getattr(self.next_type, '__bind_field__', lambda x: None)(field)
 
     def __atoms__(self):
         if hasattr(self, 'name_atom'):
@@ -143,12 +133,12 @@ class Named(WrapperType):
         if self.name_atom is None:
             self.name_atom = Atom(field.name)
 
-    def __map__(self, obj, parent=None, path=''):
+    def __map__(self, obj, parent=None):
         k, *obj = obj
         if self.next_type in (int, float, str, Atom) or isinstance(self.next_type, AtomChoice):
-            return map_sexp(self.next_type, [*obj], parent=parent, path=f'{path}/{self.name_atom}')
+            return map_sexp(self.next_type, [*obj], parent=parent)
         else:
-            return map_sexp(self.next_type, obj, parent=parent, path=f'{path}/{self.name_atom}')
+            return map_sexp(self.next_type, obj, parent=parent)
 
     def __sexp__(self, value):
         value = sexp(self.next_type, value)
@@ -160,9 +150,6 @@ class Named(WrapperType):
 
         yield [self.name_atom, *value]
 
-    def __str__(self):
-        return f'Named={self.name_atom}({self.next_type})'
-
 
 class Rename(WrapperType):
     def __init__(self, next_type, name=None):
@@ -175,8 +162,8 @@ class Rename(WrapperType):
         if hasattr(self.next_type, '__bind_field__'):
             self.next_type.__bind_field__(field)
 
-    def __map__(self, obj, parent=None, path=''):
+    def __map__(self, obj, parent=None):
-        return map_sexp(self.next_type, obj, parent=parent, path=f'{path}/{self.name_atom}')
+        return map_sexp(self.next_type, obj, parent=parent)
 
     def __sexp__(self, value):
         value, = sexp(self.next_type, value)
@@ -186,9 +173,6 @@ class Rename(WrapperType):
             key, *rest = value
             yield [self.name_atom, *rest]
 
-    def __str__(self):
-        return f'Rename={self.name_atom}({self.next_type})'
-
 
 class OmitDefault(WrapperType):
     def __bind_field__(self, field):
@@ -198,42 +182,19 @@ class OmitDefault(WrapperType):
         else:
             self.default = field.default
 
-    def __map__(self, obj, parent=None, path=''):
+    def __map__(self, obj, parent=None):
-        return map_sexp(self.next_type, obj, parent=parent, path=path)
+        return map_sexp(self.next_type, obj, parent=parent)
 
     def __sexp__(self, value):
         if value != self.default:
             yield from sexp(self.next_type, value)
 
-    def __str__(self):
-        return f'OmitDefault({self.field})'
-
 
 class YesNoAtom:
     def __init__(self, yes=Atom.yes, no=Atom.no):
         self.yes, self.no = yes, no
 
     def __map__(self, value, parent=None):
-        if not value: # compatibility with legacy flag style
-            return False
-        value, = value
-        return value == self.yes
-
-    def __sexp__(self, value):
-        yield self.yes if value else self.no
-
-
-class LegacyCompatibleFlag:
-    '''Variant of YesNoAtom that accepts both the `(flag <yes/no>)` variant and the bare `flag` variant for compatibility.'''
-
-    def __init__(self, yes=Atom.yes, no=Atom.no, value_when_empty=True):
-        self.yes, self.no = yes, no
-        self.value_when_empty = value_when_empty
-
-    def __map__(self, value, parent=None):
-        if value == []:
-            return self.value_when_empty
-
         value, = value
         return value == self.yes
 
@@ -242,50 +203,41 @@ class LegacyCompatibleFlag:
 
 
 class Wrap(WrapperType):
-    def __map__(self, value, parent=None, path=''):
+    def __map__(self, value, parent=None):
         value, = value
-        return map_sexp(self.next_type, value, parent=parent, path=path)
+        return map_sexp(self.next_type, value, parent=parent)
 
     def __sexp__(self, value):
         for inner in sexp(self.next_type, value):
             yield [inner]
 
-    def __str__(self):
-        return f'Wrap({self.next_type})'
-
 
 class Array(WrapperType):
-    def __map__(self, value, parent=None, path=''):
+    def __map__(self, value, parent=None):
-        return [map_sexp(self.next_type, [elem], parent=parent, path=path) for elem in value]
+        return [map_sexp(self.next_type, [elem], parent=parent) for elem in value]
     
     def __sexp__(self, value):
         for e in value:
             yield from sexp(self.next_type, e)
 
-    def __str__(self):
-        return f'Array({self.next_type})'
-
 
 class Untagged(WrapperType):
-    def __map__(self, value, parent=None, path=''):
+    def __map__(self, value, parent=None):
         value, = value
-        return self.next_type.__map__([self.next_type.name_atom, *value], parent=parent, path=path)
+        return self.next_type.__map__([self.next_type.name_atom, *value], parent=parent)
     
     def __sexp__(self, value):
         for inner in sexp(self.next_type, value):
             _tag, *rest = inner
             yield rest
 
-    def __str__(self):
-        return f'Untagged({self.next_type})'
-
 class List(WrapperType):
     def __bind_field__(self, field):
         self.attr = field.name
 
-    def __map__(self, value, parent, path=''):
+    def __map__(self, value, parent):
         l = getattr(parent, self.attr, [])
-        mapped = map_sexp(self.next_type, value, parent=parent, path=f'{path}/{self.attr}')
+        mapped = map_sexp(self.next_type, value, parent=parent)
         l.append(mapped)
         setattr(parent, self.attr, l)
 
@@ -293,9 +245,6 @@ class List(WrapperType):
         for elem in value:
             yield from sexp(self.next_type, elem)
 
-    def __str__(self):
-        return f'List@{self.attr}({self.next_type})'
-
 
 class _SexpTemplate:
     @staticmethod
@@ -303,32 +252,22 @@ class _SexpTemplate:
         return [kls.name_atom]
 
     @staticmethod
-    def __map__(kls, value, *args, parent=None, path='', **kwargs):
+    def __map__(kls, value, *args, parent=None, **kwargs):
         positional = iter(kls.positional)
         inst = kls(*args, **kwargs)
 
         for v in value[1:]: # skip key
             if isinstance(v, Atom) and v in kls.keys:
                 name, etype = kls.keys[v]
-                mapped = map_sexp(etype, [v], parent=inst, path=f'{path}/{kls.name_atom}')
+                mapped = map_sexp(etype, [v], parent=inst)
                 if mapped is not None:
                     setattr(inst, name, mapped)
 
             elif isinstance(v, list):
-                key = v[0]
+                name, etype = kls.keys[v[0]]
-                if key in kls.keys:
+                mapped = map_sexp(etype, v, parent=inst)
-                    name, etype = kls.keys[key]
+                if mapped is not None:
-                    mapped = map_sexp(etype, v, parent=inst, path=f'{path}/{kls.name_atom}')
+                    setattr(inst, name, mapped)
-                    if mapped is not None:
-                        setattr(inst, name, mapped)
-
-                elif hasattr(inst, '__catchall__'):
-                    inst.__catchall__(v, path=f'{path}/{kls.name_atom}')
-
-                else:
-                    #print('class has keys:')
-                    #print('\n'.join(map(str, kls.keys)))
-                    raise TypeError(f'Unhandled keyed argument {v!r} while parsing {kls}')
 
             else:
                 try:

gerbonara/cad/kicad/symbols.py

@@ -18,15 +18,14 @@ from .sexp import *
 from .sexp_mapper import *
 from .base_types import *
 from ...utils import rotate_point, Tag, arc_bounds
-from ... import __version__
 from ...newstroke import Newstroke
 from .schematic_colors import *
-from .primitives import kicad_mid_to_center_arc, Margins
+from .primitives import center_arc_to_kicad_mid
 
 
 PIN_ETYPE = AtomChoice(Atom.input, Atom.output, Atom.bidirectional, Atom.tri_state, Atom.passive, Atom.free,
                        Atom.unspecified, Atom.power_in, Atom.power_out, Atom.open_collector, Atom.open_emitter,
-                       Atom.no_connect, Atom.unconnected)
+                       Atom.no_connect)
 
 
 PIN_STYLE = AtomChoice(Atom.line, Atom.inverted, Atom.clock, Atom.inverted_clock, Atom.input_low, Atom.clock_low,
@@ -52,7 +51,7 @@ class Pin:
     style: PIN_STYLE = Atom.line
     at: AtPos = field(default_factory=AtPos)
     length: Named(float) = 2.54
-    hide: OmitDefault(Named(YesNoAtom())) = False
+    hide: Flag() = False
     name: Rename(StyledText) = field(default_factory=StyledText)
     number: Rename(StyledText) = field(default_factory=StyledText)
     alternates: List(AltFunction) = field(default_factory=list)
@@ -251,24 +250,16 @@ class Circle:
                   **self.stroke.svg_attrs(colorscheme.lines))
 
 
-@sexp_type('radius')
-class ArcRadius:
-    at: AtPos = field(default_factory=AtPos)
-    length: Named(float) = 0.0
-    angles: Rename(XYCoord) = field(default_factory=XYCoord)
-
-
 @sexp_type('arc')
 class Arc:
     start: Rename(XYCoord) = field(default_factory=XYCoord)
     mid: Rename(XYCoord) = field(default_factory=XYCoord)
     end: Rename(XYCoord) = field(default_factory=XYCoord)
-    radius: ArcRadius = None
     stroke: Stroke = field(default_factory=Stroke)
     fill: Fill = field(default_factory=Fill)
 
     def bounding_box(self, default=None):
-        (cx, cy), r = kicad_mid_to_center_arc(self.mid, self.start, self.end)
+        (cx, cy), r = center_arc_to_kicad_mid(self.mid, self.start, self.end)
         x1, y1 = self.start.x, self.start.y
         x2, y2 = self.mid.x-x1, self.mid.y-x2
         x3, y3 = (self.end.x - x1)/2, (self.end.y - y1)/2
@@ -277,7 +268,7 @@ class Arc:
 
 
     def to_svg(self, colorscheme=Colorscheme.KiCad):
-        (cx, cy), r = kicad_mid_to_center_arc(self.mid, self.start, self.end)
+        (cx, cy), r = center_arc_to_kicad_mid(self.mid, self.start, self.end)
 
         x1r = self.start.x - cx
         y1r = self.start.y - cy
@@ -404,12 +395,10 @@ class Rectangle:
 
 @sexp_type('property')
 class Property(TextMixin):
-    private: Flag() = False
     name: str = None
     value: str = None
     id: Named(int) = None
     at: AtPos = field(default_factory=AtPos)
-    show_name: Flag() = False
     effects: TextEffect = field(default_factory=TextEffect)
 
     # Alias value for text mixin
@@ -427,24 +416,13 @@ class Property(TextMixin):
 
 @sexp_type('pin_numbers')
 class PinNumberSpec:
-    hide: Named(YesNoAtom()) = False
+    hide: Flag() = False
 
 
 @sexp_type('pin_names')
 class PinNameSpec:
     offset: OmitDefault(Named(float)) = 0.508
-    hide: OmitDefault(Named(YesNoAtom())) = False
+    hide: Flag() = False
-
-@sexp_type('text_box')
-class TextBox:
-    text: str = ''
-    exclude_from_sim: OmitDefault(Named(YesNoAtom())) = False
-    at: AtPos = field(default_factory=AtPos)
-    size: Rename(XYCoord) = field(default_factory=XYCoord)
-    margins: Margins = None
-    stroke: Stroke = field(default_factory=Stroke)
-    fill: Fill = field(default_factory=Fill)
-    effects: TextEffect = field(default_factory=TextEffect)
 
 
 @sexp_type('symbol')
@@ -455,7 +433,6 @@ class Unit:
     polylines: List(Polyline) = field(default_factory=list)
     rectangles: List(Rectangle) = field(default_factory=list)
     texts: List(Text) = field(default_factory=list)
-    text_boxes: List(TextBox) = field(default_factory=list)
     pins: List(Pin) = field(default_factory=list)
     unit_name: Named(str) = None
     _ : SEXP_END = None
@@ -504,12 +481,10 @@ class Symbol:
     pin_numbers: OmitDefault(PinNumberSpec) = field(default_factory=PinNumberSpec)
     pin_names: OmitDefault(PinNameSpec) = field(default_factory=PinNameSpec)
     exclude_from_sim: OmitDefault(Named(YesNoAtom())) = False
-    exclude_from_sim: Named(YesNoAtom()) = False
     in_bom: Named(YesNoAtom()) = True
     on_board: Named(YesNoAtom()) = True
     properties: List(Property) = field(default_factory=list)
     units: List(Unit) = field(default_factory=list)
-    embedded_fonts: Named(YesNoAtom()) = False
     _ : SEXP_END = None
     library = None
     name: str = None
@@ -598,8 +573,7 @@ SUPPORTED_FILE_FORMAT_VERSIONS = [20211014, 20220914]
 @sexp_type('kicad_symbol_lib')
 class Library:
     _version: Named(int, name='version') = 20211014
-    generator: Named(str) = Atom.gerbonara
+    generator: Named(Atom) = Atom.gerbonara
-    generator_version: Named(str) = __version__
     symbols: List(Symbol) = field(default_factory=list)
     _ : SEXP_END = None
     original_filename: str = None

gerbonara/cad/primitives.py

@@ -4,7 +4,7 @@ import math
 import warnings
 from copy import copy
 from itertools import zip_longest, chain
-from dataclasses import dataclass, field, replace, KW_ONLY
+from dataclasses import dataclass, field, KW_ONLY
 from collections import defaultdict
 
 from ..utils import LengthUnit, MM, rotate_point, svg_arc, sum_bounds, bbox_intersect, Tag, offset_bounds
@@ -14,9 +14,6 @@ from ..apertures import Aperture, CircleAperture, ObroundAperture, RectangleAper
 from ..newstroke import Newstroke
 
 
-class UNDEFINED:
-    pass
-
 def sgn(x):
     return -1 if x < 0 else 1
 
@@ -118,7 +115,7 @@ class Board:
 
     def layer_stack(self, layer_stack=None):
         if layer_stack is None:
-            layer_stack = LayerStack(board_name='proto')
+            layer_stack = LayerStack()
 
         cache = {}
         for obj in chain(self.objects):
@@ -322,7 +319,6 @@ class Text(Positioned):
         xs = [x for points in strokes for x, _y in points]
         ys = [y for points in strokes for _x, y in points]
         min_x, min_y, max_x, max_y = min(xs), min(ys), max(xs), max(ys)
-        h = self.font_size + self.stroke_width # (max_y - min_y)
 
         if self.h_align == 'left':
             x0 = 0
@@ -333,16 +329,16 @@ class Text(Positioned):
         else:
             raise ValueError('h_align must be one of "left", "center", or "right".')
 
-        if self.v_align == 'bottom':
+        if self.v_align == 'top':
-            y0 = h
+            y0 = -(max_y - min_y)
         elif self.v_align == 'middle':
-            y0 = h/2
+            y0 = -(max_y - min_y)/2
-        elif self.v_align == 'top':
+        elif self.v_align == 'bottom':
             y0 = 0
         else:
             raise ValueError('v_align must be one of "top", "middle", or "bottom".')
 
-        if self.flip:
+        if self.side == 'bottom':
             x0 += min_x + max_x
             x_sign = -1
         else:
@@ -352,7 +348,7 @@ class Text(Positioned):
 
         for stroke in strokes:
             for (x1, y1), (x2, y2) in zip(stroke[:-1], stroke[1:]):
-                obj = Line(x0+x_sign*x1, y0+y1, x0+x_sign*x2, y0+y2, aperture=ap, unit=self.unit, polarity_dark=self.polarity_dark)
+                obj = Line(x0+x_sign*x1, y0-y1, x0+x_sign*x2, y0-y2, aperture=ap, unit=self.unit, polarity_dark=self.polarity_dark)
                 obj.rotate(rotation)
                 obj.offset(obj_x, obj_y)
                 layer_stack['bottom' if flip else 'top', self.layer].objects.append(obj)
@@ -369,11 +365,11 @@ class Text(Positioned):
             x0 = -approx_w
 
         if self.v_align == 'top':
-            y0 = 0
+            y0 = -approx_h
         elif self.v_align == 'middle':
             y0 = -approx_h/2
         elif self.v_align == 'bottom':
-            y0 = -approx_h
+            y0 = 0
 
         return (self.x+x0, self.y+y0), (self.x+x0+approx_w, self.y+y0+approx_h)
 
@@ -386,7 +382,6 @@ class PadStackAperture:
     offset_x: float = 0 # in PadStack units
     offset_y: float = 0
     rotation: float = 0
-    invert: bool = False
 
 
 @dataclass(frozen=True, slots=True)
@@ -401,20 +396,20 @@ class PadStack:
     def flashes(self, x, y, rotation: float = 0, flip: bool = False):
         for ap in self.apertures:
             aperture = ap.aperture.rotated(ap.rotation + rotation)
-            fl = Flash(ap.offset_x, ap.offset_y, aperture, polarity_dark=not ap.invert, unit=self.unit)
+            fl = Flash(ap.offset_x, ap.offset_y)
             fl.rotate(rotation)
             fl.offset(x, y)
-            side = ap.side
+            side = fl.side
             if flip:
                 side = {'top': 'bottom', 'bottom': 'top'}.get(side, side)
-            yield side, ap.layer, fl
+            yield side, fl.layer, fl
 
     def render(self, layer_stack, x, y, rotation: float = 0, flip: bool = False):
         for side, layer, flash in self.flashes(x, y, rotation, flip):
-            if side == 'drill' and layer == 'plated':
+            if side == 'drill' and use == 'plated':
                 layer_stack.drill_pth.objects.append(flash)
 
-            elif side == 'drill' and layer == 'nonplated':
+            elif side == 'drill' and use == 'nonplated':
                 layer_stack.drill_npth.objects.append(flash)
 
             elif (side, layer) in layer_stack:
@@ -454,37 +449,17 @@ class SMDStack(PadStack):
         return kls(CircleAperture(dia, unit=unit), mask_expansion, paste_expansion, paste, flip, unit=unit)
     
 
-@dataclass(frozen=True, slots=True)
-class MechanicalHoleStack(PadStack):
-    drill_dia: float
-    mask_expansion: float = 0.0
-    mask_aperture = None
-
-    @property
-    def apertures(self):
-        mask_aperture = self.mask_aperture or CircleAperture(self.drill_dia + self.mask_expansion, unit=self.unit)
-        yield PadStackAperture(mask_aperture, 'top', 'mask')
-        yield PadStackAperture(mask_aperture, 'bottom', 'mask')
-
-    @property
-    def single_sided(self):
-        return False
-
-
 @dataclass(frozen=True, slots=True)
 class THTPad(PadStack):
     drill_dia: float
     pad_top: SMDStack
     pad_bottom: SMDStack = None
-    aperture_inner: Aperture = UNDEFINED
+    aperture_inner: Aperture = None
     plated: bool = True
 
     def __post_init__(self):
         if self.pad_bottom is None:
             object.__setattr__(self, 'pad_bottom', replace(self.pad_top, flip=True))
-        
-        if self.aperture_inner is UNDEFINED:
-            object.__setattr__(self, 'aperture_inner', self.pad_top.aperture)
 
         if self.pad_top.flip:
             raise ValueError('top pad cannot be flipped')
@@ -497,8 +472,7 @@ class THTPad(PadStack):
     def apertures(self):
         yield from self.pad_top.apertures
         yield from self.pad_bottom.apertures
-        if self.aperture_inner is not None:
+        yield PadStackAperture(self.aperture_inner, 'inner', 'copper')
-            yield PadStackAperture(self.aperture_inner, 'inner', 'copper')
         yield PadStackAperture(ExcellonTool(self.drill_dia, plated=self.plated, unit=self.unit), 'drill', self.plating)
 
     @property
@@ -512,7 +486,7 @@ class THTPad(PadStack):
 
     @classmethod
     def circle(kls, drill_dia, dia, rotation=0, mask_expansion=0.0, paste_expansion=0.0, paste=True, plated=True, unit=MM):
-        pad = SMDStack.circle(dia, mask_expansion, paste_expansion, paste, unit=unit)
+        pad = SMDStack.circle(dia, rotation, mask_expansion, paste_expansion, paste, unit=unit)
         return kls(drill_dia, pad, plated=plated)
 
     @classmethod
@@ -564,10 +538,6 @@ class Via(FrozenPositioned):
 class Pad(Positioned):
     pad_stack: PadStack
 
-    def render(self, layer_stack, cache=None):
-        x, y, rotation, flip = self.abs_pos
-        self.pad_stack.render(layer_stack, x, y, rotation, flip)
-
     @property
     def single_sided(self):
         return self.pad_stack.single_sided

gerbonara/cad/protoboard.py

@@ -0,0 +1,739 @@
+
+import sys
+import re
+import math
+import string
+import itertools
+from copy import copy, deepcopy
+import warnings
+import importlib.resources
+
+from ..utils import MM, rotate_point
+from .primitives import *
+from ..graphic_objects import Region
+from ..apertures import RectangleAperture, CircleAperture, ApertureMacroInstance
+from ..aperture_macros.parse import ApertureMacro, VariableExpression
+from ..aperture_macros import primitive as amp
+from .kicad import footprints as kfp
+from . import data as package_data
+
+
+class ProtoBoard(Board):
+    def __init__(self, w, h, content, margin=None, corner_radius=None, mounting_hole_dia=None, mounting_hole_offset=None, unit=MM):
+        corner_radius = corner_radius or unit(1.5, MM)
+        super().__init__(w, h, corner_radius, unit=unit)
+        self.margin = margin or unit(2, MM)
+        self.content = content
+
+        if mounting_hole_dia:
+            mounting_hole_offset = mounting_hole_offset or mounting_hole_dia*2
+            ko = mounting_hole_offset*2
+
+            self.add(Hole(mounting_hole_offset, mounting_hole_offset, mounting_hole_dia, unit=unit))
+            self.add(Hole(w-mounting_hole_offset, mounting_hole_offset, mounting_hole_dia, unit=unit))
+            self.add(Hole(mounting_hole_offset, h-mounting_hole_offset, mounting_hole_dia, unit=unit))
+            self.add(Hole(w-mounting_hole_offset, h-mounting_hole_offset, mounting_hole_dia, unit=unit))
+
+            self.keepouts.append(((0, 0), (ko, ko)))
+            self.keepouts.append(((w-ko, 0), (w, ko)))
+            self.keepouts.append(((0, h-ko), (ko, h)))
+            self.keepouts.append(((w-ko, h-ko), (w, h)))
+
+        self.generate()
+
+    def generate(self, unit=MM):
+        bbox = ((self.margin, self.margin), (self.w-self.margin, self.h-self.margin))
+        bbox = unit.convert_bounds_from(self.unit, bbox)
+        for obj in self.content.generate(bbox, (True, True, True, True), unit):
+            self.add(obj, keepout_errors='skip')
+
+
+class PropLayout:
+    def __init__(self, content, direction, proportions):
+        self.content = list(content)
+        if direction not in ('h', 'v'):
+            raise ValueError('direction must be one of "h", or "v".')
+        self.direction = direction
+        self.proportions = list(proportions)
+        if len(content) != len(proportions):
+            raise ValueError('proportions and content must have same length')
+
+    def generate(self, bbox, border_text, unit=MM):
+        for i, (bbox, child) in enumerate(self.layout_2d(bbox, unit)):
+            first = bool(i == 0)
+            last = bool(i == len(self.content)-1)
+            yield from child.generate(bbox, (
+                border_text[0] and (last or self.direction == 'h'),
+                border_text[1] and (last or self.direction == 'v'),
+                border_text[2] and (first or self.direction == 'h'),
+                border_text[3] and (first or self.direction == 'v'),
+                ), unit)
+
+    def fit_size(self, w, h, unit=MM):
+        widths = []
+        heights = []
+        for ((x_min, y_min), (x_max, y_max)), child in self.layout_2d(((0, 0), (w, h)), unit):
+            if not isinstance(child, EmptyProtoArea):
+                widths.append(x_max - x_min)
+                heights.append(y_max - y_min)
+        if self.direction == 'h':
+            return sum(widths), max(heights, default=0)
+        else:
+            return max(widths, default=0), sum(heights)
+
+    def layout_2d(self, bbox, unit=MM):
+        (x, y), (w, h) = bbox
+        w, h = w-x, h-y
+
+        actual_l = 0
+        target_l = 0
+
+        for l, child in zip(self.layout(w if self.direction == 'h' else h, unit), self.content):
+            this_x, this_y = x, y
+            this_w, this_h = w, h
+            target_l += l
+
+            if self.direction == 'h':
+                this_w = target_l - actual_l
+            else:
+                this_h = target_l - actual_l
+
+            this_w, this_h = child.fit_size(this_w, this_h, unit)
+
+            if self.direction == 'h':
+                x += this_w
+                actual_l += this_w
+                this_h = h
+            else:
+                y += this_h
+                actual_l += this_h
+                this_w = w
+
+            yield ((this_x, this_y), (this_x+this_w, this_y+this_h)), child
+
+    def layout(self, length, unit=MM):
+        out = [ eval_value(value, MM(length, unit)) for value in self.proportions ]
+        total_length = sum(value for value in out if value is not None)
+        if length - total_length < -1e-6:
+            raise ValueError(f'Proportions sum to {total_length} mm, which is greater than the available space of {length} mm.')
+
+        leftover = length - total_length
+        sum_props = sum( (value or 1.0) for value in self.proportions if not isinstance(value, str) )
+        return [ unit(leftover * (value or 1.0) / sum_props if not isinstance(value, str) else calculated, MM)
+                for value, calculated in zip(self.proportions, out) ]
+
+    @property
+    def single_sided(self):
+        return all(elem.single_sided for elem in self.content)
+
+    def __str__(self):
+        children = ', '.join( f'{elem}:{width}' for elem, width in zip(self.content, self.proportions))
+        return f'PropLayout[{self.direction.upper()}]({children})'
+
+
+class TwoSideLayout:
+    def __init__(self, top, bottom):
+        self.top, self.bottom = top, bottom
+
+        if not top.single_sided or not bottom.single_sided:
+            warnings.warn('Two-sided pattern used on one side of a TwoSideLayout')
+
+    def fit_size(self, w, h, unit=MM):
+        w1, h1 = self.top.fit_size(w, h, unit)
+        w2, h2 = self.bottom.fit_size(w, h, unit)
+        if isinstance(self.top, EmptyProtoArea):
+            if isinstance(self.bottom, EmptyProtoArea):
+                return w1, h1
+            return w2, h2
+        if isinstance(self.bottom, EmptyProtoArea):
+            return w1, h1
+        return max(w1, w2), max(h1, h2)
+
+    def generate(self, bbox, border_text, unit=MM):
+        yield from self.top.generate(bbox, border_text, unit)
+        for obj in self.bottom.generate(bbox, border_text, unit):
+            obj.side = 'bottom'
+            yield obj
+
+
+def numeric(start=1):
+    def gen():
+        nonlocal start
+        for i in itertools.count(start):
+            yield str(i)
+
+    return gen
+
+
+def alphabetic(case='upper'):
+    if case not in ('lower', 'upper'):
+        raise ValueError('case must be one of "lower" or "upper".')
+
+    index = string.ascii_lowercase if case == 'lower' else string.ascii_uppercase
+
+    def gen():
+        nonlocal index
+
+        for i in itertools.count():
+            if i<26:
+                yield index[i]
+                continue
+
+            i -= 26
+            if i<26*26:
+                yield index[i//26] + index[i%26]
+                continue
+
+            i -= 26*26
+            if i<26*26*26:
+                yield index[i//(26*26)] + index[(i//26)%26] + index[i%26]
+
+            else:
+                raise ValueError('row/column index out of range')
+
+    return gen
+
+
+class PatternProtoArea:
+    def __init__(self, pitch_x, pitch_y=None, obj=None, numbers=True, font_size=None, font_stroke=None, number_x_gen=alphabetic(), number_y_gen=numeric(), interval_x=5, interval_y=None, margin=0, unit=MM):
+        self.pitch_x = pitch_x
+        self.pitch_y = pitch_y or pitch_x
+        self.margin = margin
+        self.obj = obj
+        self.unit = unit
+        self.numbers = numbers
+        self.font_size = font_size or unit(1.0, MM)
+        self.font_stroke = font_stroke or unit(0.2, MM)
+        self.interval_x = interval_x
+        self.interval_y = interval_y or (1 if MM(self.pitch_y, unit) >= 2.0 else 5)
+        self.number_x_gen, self.number_y_gen = number_x_gen, number_y_gen
+
+    def fit_size(self, w, h, unit=MM):
+        (min_x, min_y), (max_x, max_y) = self.fit_rect(((0, 0), (max(0, w-2*self.margin), max(0, h-2*self.margin))))
+        return max_x-min_x + 2*self.margin, max_y-min_y + 2*self.margin
+
+    def fit_rect(self, bbox, unit=MM):
+        (x, y), (w, h) = bbox
+        x, y = x+self.margin, y+self.margin
+        w, h = w-x-self.margin, h-y-self.margin
+
+        w_mod = round((w + 5e-7) % unit(self.pitch_x, self.unit), 6)
+        h_mod = round((h + 5e-7) % unit(self.pitch_y, self.unit), 6)
+        w_fit, h_fit = round(w - w_mod, 6), round(h - h_mod, 6)
+
+        x = x + (w-w_fit)/2
+        y = y + (h-h_fit)/2
+        return (x, y), (x+w_fit, y+h_fit)
+
+    def generate(self, bbox, border_text, unit=MM):
+        (x, y), (w, h) = bbox
+        w, h = w-x, h-y
+
+        n_x = int(w//unit(self.pitch_x, self.unit))
+        n_y = int(h//unit(self.pitch_y, self.unit))
+        off_x = (w % unit(self.pitch_x, self.unit)) / 2
+        off_y = (h % unit(self.pitch_y, self.unit)) / 2
+
+        if self.numbers:
+            for i, lno_i in list(zip(range(n_y), self.number_y_gen())):
+                if i == 0 or i == n_y - 1 or (i+1) % self.interval_y == 0:
+                    t_y = off_y + y + (n_y - 1 - i + 0.5) * self.pitch_y
+
+                    if border_text[3]:
+                        t_x = x + off_x
+                        yield Text(t_x, t_y, lno_i, self.font_size, self.font_stroke, 'right', 'middle', unit=self.unit)
+                        if not self.single_sided:
+                            yield Text(t_x, t_y, lno_i, self.font_size, self.font_stroke, 'right', 'middle', side='bottom', unit=self.unit)
+
+                    if border_text[1]:
+                        t_x = x + w - off_x
+                        yield Text(t_x, t_y, lno_i, self.font_size, self.font_stroke, 'left', 'middle', unit=self.unit)
+                        if not self.single_sided:
+                            yield Text(t_x, t_y, lno_i, self.font_size, self.font_stroke, 'left', 'middle', side='bottom', unit=self.unit)
+
+            for i, lno_i in zip(range(n_x), self.number_x_gen()):
+                if i == 0 or i == n_x - 1 or (i+1) % self.interval_x == 0:
+                    t_x = off_x + x + (i + 0.5) * self.pitch_x
+
+                    if border_text[2]:
+                        t_y = y + off_y
+                        yield Text(t_x, t_y, lno_i, self.font_size, self.font_stroke, 'center', 'top', unit=self.unit)
+                        if not self.single_sided:
+                            yield Text(t_x, t_y, lno_i, self.font_size, self.font_stroke, 'center', 'top', side='bottom', unit=self.unit)
+
+                    if border_text[0]:
+                        t_y = y + h - off_y
+                        yield Text(t_x, t_y, lno_i, self.font_size, self.font_stroke, 'center', 'bottom', unit=self.unit)
+                        if not self.single_sided:
+                            yield Text(t_x, t_y, lno_i, self.font_size, self.font_stroke, 'center', 'bottom', side='bottom', unit=self.unit)
+
+
+        for i in range(n_x):
+            for j in range(n_y):
+                if hasattr(self.obj, 'inst'):
+                    inst = self.obj.inst(i, j, i == n_x-1, j == n_y-1)
+                    if not inst:
+                        continue
+                else:
+                    inst = copy(self.obj)
+
+                inst.x = inst.unit(off_x + x, unit) + (i + 0.5) * inst.unit(self.pitch_x, self.unit)
+                inst.y = inst.unit(off_y + y, unit) + (j + 0.5) * inst.unit(self.pitch_y, self.unit)
+                yield inst
+
+    @property
+    def single_sided(self):
+        return self.obj.single_sided
+
+
+class EmptyProtoArea:
+    def __init__(self, copper_fill=False):
+        self.copper_fill = copper_fill
+
+    def fit_size(self, w, h, unit=MM):
+        return w, h
+
+    def generate(self, bbox, border_text, unit=MM):
+        if self.copper_fill:
+            (min_x, min_y), (max_x, max_y) = bbox
+            group = ObjectGroup(0, 0, top_copper=[Region([(min_x, min_y), (max_x, min_y), (max_x, max_y), (min_x, max_y)],
+                                                unit=unit, polarity_dark=True)])
+            group.bounding_box = lambda *args, **kwargs: None
+            yield group
+
+    @property
+    def single_sided(self):
+        return True
+
+
+class ManhattanPads(ObjectGroup):
+    def __init__(self, w, h=None, gap=0.2, unit=MM):
+        super().__init__(0, 0)
+        h = h or w
+        self.gap = gap
+        self.unit = unit
+
+        p = (w-2*gap)/2
+        q = (h-2*gap)/2
+        small_ap = RectangleAperture(p, q, unit=unit)
+
+        s = min(w, h) / 2 / math.sqrt(2)
+        large_ap = RectangleAperture(s, s, unit=unit).rotated(math.pi/4)
+        large_ap_neg = RectangleAperture(s+2*gap, s+2*gap, unit=unit).rotated(math.pi/4)
+
+        a = gap/2 + p/2
+        b = gap/2 + q/2
+
+        self.top_copper.append(Flash(-a, -b, aperture=small_ap, unit=unit))
+        self.top_copper.append(Flash(-a,  b, aperture=small_ap, unit=unit))
+        self.top_copper.append(Flash( a, -b, aperture=small_ap, unit=unit))
+        self.top_copper.append(Flash( a,  b, aperture=small_ap, unit=unit))
+        self.top_copper.append(Flash(0, 0, aperture=large_ap_neg, polarity_dark=False, unit=unit))
+        self.top_copper.append(Flash(0, 0, aperture=large_ap, unit=unit))
+        self.top_mask = self.top_copper
+
+
+class RFGroundProto(ObjectGroup):
+    def __init__(self, pitch=None, drill=None, clearance=None, via_dia=None, via_drill=None, pad_dia=None, trace_width=None, unit=MM):
+        super().__init__(0, 0)
+        self.unit = unit
+        self.pitch = pitch = pitch or unit(2.54, MM)
+        self.drill = drill = drill or unit(0.9, MM)
+        self.clearance = clearance = clearance or unit(0.3, MM)
+        self.via_drill = via_drill = via_drill or unit(0.4, MM)
+        self.via_dia = via_dia = via_dia or unit(0.8, MM)
+
+        if pad_dia is None:
+            self.trace_width = trace_width = trace_width or unit(0.3, MM)
+            pad_dia = pitch - trace_width - 2*clearance 
+        elif trace_width is None:
+            trace_width = pitch - pad_dia - 2*clearance
+        self.pad_dia = pad_dia
+
+        via_ap = RectangleAperture(via_dia, via_dia, unit=unit).rotated(math.pi/4)
+        pad_ap = CircleAperture(pad_dia, unit=unit)
+        pad_neg_ap = CircleAperture(pad_dia+2*clearance, unit=unit)
+        ground_ap = RectangleAperture(pitch + unit(0.01, MM), pitch + unit(0.01, MM), unit=unit)
+        pad_drill = ExcellonTool(drill, plated=True, unit=unit)
+        via_drill = ExcellonTool(via_drill, plated=True, unit=unit)
+
+        self.top_copper.append(Flash(0, 0, aperture=ground_ap, unit=unit))
+        self.top_copper.append(Flash(0, 0, aperture=pad_neg_ap, polarity_dark=False, unit=unit))
+        self.top_copper.append(Flash(0, 0, aperture=pad_ap, unit=unit))
+        self.top_mask.append(Flash(0, 0, aperture=pad_ap, unit=unit))
+        self.top_copper.append(Flash(pitch/2, pitch/2, aperture=via_ap, unit=unit))
+        self.top_mask.append(Flash(pitch/2, pitch/2, aperture=via_ap, unit=unit))
+        self.drill_pth.append(Flash(0, 0, aperture=pad_drill, unit=unit))
+        self.drill_pth.append(Flash(pitch/2, pitch/2, aperture=via_drill, unit=unit))
+
+        self.bottom_copper = self.top_copper
+        self.bottom_mask = self.top_mask
+
+    def inst(self, x, y, border_x, border_y):
+        inst = copy(self)
+        if border_x or border_y:
+            inst.drill_pth = inst.drill_pth[:-1]
+            inst.top_copper = inst.bottom_copper = inst.top_copper[:-1]
+            inst.top_mask = inst.bottom_mask = inst.top_mask[:-1]
+        return inst
+
+
+class THTFlowerProto(ObjectGroup):
+    def __init__(self, pitch=None, drill=None, diameter=None, unit=MM):
+        super().__init__(0, 0, unit=unit)
+        self.pitch = pitch = pitch or unit(2.54, MM)
+        drill = drill or unit(0.9, MM)
+        diameter = diameter or unit(2.0, MM)
+
+        p = pitch / 2
+        self.objects.append(THTPad.circle(-p, 0, drill, diameter, paste=False, unit=unit))
+        self.objects.append(THTPad.circle( p, 0, drill, diameter, paste=False, unit=unit))
+        self.objects.append(THTPad.circle(0, -p, drill, diameter, paste=False, unit=unit))
+        self.objects.append(THTPad.circle(0,  p, drill, diameter, paste=False, unit=unit))
+
+        middle_ap = CircleAperture(diameter, unit=unit)
+        self.top_copper.append(Flash(0, 0, aperture=middle_ap, unit=unit))
+        self.bottom_copper = self.top_mask = self.bottom_mask = self.top_copper
+    
+    def inst(self, x, y, border_x, border_y):
+        if (x % 2 == 0) and (y % 2 == 0):
+            return copy(self)
+
+        if (x % 2 == 1) and (y % 2 == 1):
+            return copy(self)
+
+        return None
+
+    def bounding_box(self, unit=MM):
+        x, y, rotation = self.abs_pos
+        p = self.pitch/2
+        return unit.convert_bounds_from(self.unit, ((x-p, y-p), (x+p, y+p)))
+
+class PoweredProto(ObjectGroup):
+    """ Cell primitive for "powered" THT breadboards. This cell type is based on regular THT pads in a 100 mil grid, but
+    adds small SMD pads diagonally between the THT pads. These SMD pads are interconnected with traces and vias in such
+    a way that every second one is inter-linked, forming two fully connected grids. Next to every THT pad you have one
+    pad of each grid, so this layout is awesome for distributing power throughout the board.
+
+    This design is based on one that Yajima Manufacturing Akizuki Denshi, Akihabara's finest electronics store sells for
+    next to nothing. Sadly, they don't ship internationally and they don't even have an English website, but if you ever
+    are in Akihabara, Tokyo, Japan I can *highly* recommend a visit. The ones Yajima make are better than what this will
+    produce since the Yajima ones use a two-colored silkscreen to visually distinguish the two power pad grids.
+
+    Links:
+    Akizuki Denshi product page: https://akizukidenshi.com/catalog/g/gP-07214/
+    Yajima Manufacturing Corporation website: http://www.yajima-works.co.jp/index.html
+    """
+
+    def __init__(self, pitch=None, drill=None, clearance=None, power_pad_dia=None, via_size=None, trace_width=None, unit=MM):
+        super().__init__(0, 0)
+        self.unit = unit
+        self.pitch = pitch = pitch or unit(2.54, MM)
+        self.drill = drill = drill or unit(0.9, MM)
+        self.clearance = clearance = clearance or unit(0.3, MM)
+        self.trace_width = trace_width = trace_width or unit(0.3, MM)
+        self.via_size = via_size = via_size or unit(0.4, MM)
+
+        main_pad_dia = pitch - trace_width - 2*clearance
+        power_pad_dia_max = math.sqrt(2)*pitch - main_pad_dia - 2*clearance
+        if power_pad_dia is None:
+            power_pad_dia = power_pad_dia_max - clearance # reduce some more to give the user more room
+        elif power_pad_dia > power_pad_dia_max:
+            warnings.warn(f'Power pad diameter {power_pad_dia} > {power_pad_dia_max} violates pad-to-pad clearance')
+        self.power_pad_dia = power_pad_dia
+
+        main_ap = CircleAperture(main_pad_dia, unit=unit)
+        power_ap = CircleAperture(self.power_pad_dia, unit=unit)
+
+        for l in [self.top_copper, self.bottom_copper]:
+            l.append(Flash(0, 0, aperture=main_ap, unit=unit))
+
+            l.append(Flash(-pitch/2, -pitch/2, aperture=power_ap, unit=unit))
+            l.append(Flash(-pitch/2,  pitch/2, aperture=power_ap, unit=unit))
+            l.append(Flash( pitch/2, -pitch/2, aperture=power_ap, unit=unit))
+            l.append(Flash( pitch/2,  pitch/2, aperture=power_ap, unit=unit))
+
+        self.drill_pth.append(Flash(0, 0, ExcellonTool(drill, plated=True, unit=unit), unit=unit))
+        self.drill_pth.append(Flash(-pitch/2, -pitch/2, ExcellonTool(via_size, plated=True, unit=unit), unit=unit))
+
+        self.top_mask = copy(self.top_copper)
+        self.bottom_mask = copy(self.bottom_copper)
+
+        self.line_ap = CircleAperture(trace_width, unit=unit)
+        self.top_copper.append(Line(-pitch/2, -pitch/2, -pitch/2, pitch/2, aperture=self.line_ap, unit=unit))
+        self.top_copper.append(Line(pitch/2, -pitch/2, pitch/2, pitch/2, aperture=self.line_ap, unit=unit))
+        self.bottom_copper.append(Line(-pitch/2, -pitch/2, pitch/2, -pitch/2, aperture=self.line_ap, unit=unit))
+        self.bottom_copper.append(Line(-pitch/2, pitch/2, pitch/2, pitch/2, aperture=self.line_ap, unit=unit))
+
+    def inst(self, x, y, border_x, border_y):
+        inst = copy(self)
+        if (x + y) % 2 == 0:
+            inst.drill_pth = inst.drill_pth[:-1]
+
+        c = self.power_pad_dia/2 + self.clearance
+        p = self.pitch/2
+
+        if x == 1:
+            inst.top_silk = [Line(-p, -p+c, -p, p-c, aperture=self.line_ap, unit=self.unit)]
+        elif x % 2 == 0:
+            inst.top_silk = [Line(p, -p+c, p, p-c, aperture=self.line_ap, unit=self.unit)]
+
+        if y == 0:
+            inst.bottom_silk = [Line(-p+c, -p, p-c, -p, aperture=self.line_ap, unit=self.unit)]
+        elif y % 2 == 1:
+            inst.bottom_silk = [Line(-p+c, p, p-c, p, aperture=self.line_ap, unit=self.unit)]
+
+        return inst
+
+    def bounding_box(self, unit=MM):
+        x, y, rotation = self.abs_pos
+        p = self.pitch/2
+        return unit.convert_bounds_from(self.unit, ((x-p, y-p), (x+p, y+p)))
+
+
+class SpikyProto(ObjectGroup):
+    """ Cell primitive for the "spiky" protoboard designed by @electroniceel and published on github at the URL below.
+    This layout has small-ish standard THT pads, but in between these pads it puts a grid of SMD pads that are designed
+    for easy solder bridging to allow for the construction of traces from solder bridging.
+
+    Github URL: https://github.com/electroniceel/protoboard
+    """
+
+    def __init__(self, pitch=None, drill=None, clearance=None, power_pad_dia=None, via_size=None, trace_width=None, unit=MM):
+        super().__init__(0, 0, unit=unit)
+        res = importlib.resources.files(package_data)
+
+        self.fp_center = kfp.Footprint.load(res.joinpath('center-pad-spikes.kicad_mod').read_text(encoding='utf-8'))
+        self.corner_pad = kfp.FootprintInstance(1.27, 1.27, self.fp_center, unit=MM)
+
+        self.pad = kfp.Footprint.load(res.joinpath('tht-0.8.kicad_mod').read_text(encoding='utf-8'))
+        self.center_pad = kfp.FootprintInstance(0, 0, self.pad, unit=MM)
+
+        self.fp_between = kfp.Footprint.load(res.joinpath('pad-between-spiked.kicad_mod').read_text(encoding='utf-8'))
+        self.right_pad = kfp.FootprintInstance(1.27, 0, self.fp_between, unit=MM)
+        self.top_pad = kfp.FootprintInstance(0, 1.27, self.fp_between, rotation=math.pi/2, unit=MM)
+
+    @property
+    def objects(self):
+        return [x for x in (self.center_pad, self.corner_pad, self.right_pad, self.top_pad) if x is not None]
+
+    @objects.setter
+    def objects(self, value):
+        pass
+
+    def inst(self, x, y, border_x, border_y):
+        inst = copy(self)
+
+        if border_x:
+            inst.corner_pad = inst.right_pad = None
+
+        if border_y:
+            inst.corner_pad = inst.top_pad = None
+
+        return inst
+
+
+class AlioCell(ObjectGroup):
+    """ Cell primitive for the ALio protoboard designed by arief ibrahim adha and published on hackaday.io at the URL
+    below. Similar to electroniceel's spiky protoboard, this layout has small-ish standard THT pads, but in between
+    these pads it puts a grid of SMD pads that are designed for easy solder bridging to allow for the construction of
+    traces from solder bridging.
+
+    Hackaday.io URL: https://hackaday.io/project/28570/
+    """
+
+    def __init__(self, pitch=None, drill=None, clearance=None, link_pad_width=None, link_trace_width=None, via_size=None, unit=MM):
+        super().__init__(0, 0, unit=unit)
+        self.pitch = pitch or unit(2.54, MM)
+        self.drill = drill or unit(0.9, MM)
+        self.clearance = clearance or unit(0.3, MM)
+        self.link_pad_width = link_pad_width or unit(1.1, MM)
+        self.link_trace_width = link_trace_width or unit(0.5, MM)
+        self.via_size = via_size or unit(0.4, MM)
+        self.border_x, self.border_y = False, False
+        self.inst_x, self.inst_y = None, None
+
+    @property
+    def single_sided(self):
+        return False
+
+    def inst(self, x, y, border_x, border_y):
+        inst = copy(self)
+        inst.border_x, inst.border_y = border_x, border_y
+        inst.inst_x, inst.inst_y = x, y
+        return inst
+
+    def bounding_box(self, unit):
+        x, y, rotation = self.abs_pos
+        # FIXME hack
+        return self.unit.convert_bounds_to(unit, ((x-self.pitch/2, y-self.pitch/2), (x+self.pitch/2, y+self.pitch/2)))
+
+    def render(self, layer_stack, cache=None):
+        x, y, rotation = self.abs_pos
+        def xf(fe):
+            fe = copy(fe)
+            fe.rotate(rotation)
+            fe.offset(x, y, self.unit)
+            return fe
+
+        var = VariableExpression
+        # parameters: [1: total height = pad width, 2: pitch, 3: trace width, 4: corner radius, 5: rotation, 6: clearance]
+        alio_main_macro = ApertureMacro('ALIOM', (
+            amp.CenterLine(MM, 1, var(2)-var(6), var(2)-var(3)-2*var(6), 0, 0, var(5)),
+            amp.Outline(MM, 0, 5, (
+                -var(2)/2,          -var(2)/2,
+                -var(2)/2,          -(var(7)-var(8)),
+                -var(7),            -(var(7)-var(8)),
+                -(var(7)-var(8)),   -var(7),
+                -(var(7)-var(8)),   -var(2)/2, 
+                -var(2)/2,          -var(2)/2,
+                ), var(5)),
+            amp.Outline(MM, 0, 5, (
+                -var(2)/2,           var(2)/2,
+                -var(2)/2,           (var(7)-var(8)),
+                -var(7),             (var(7)-var(8)),
+                -(var(7)-var(8)),    var(7),
+                -(var(7)-var(8)),    var(2)/2, 
+                -var(2)/2,           var(2)/2,
+                ), var(5)),
+            amp.Outline(MM, 0, 5, (
+                 var(2)/2,          -var(2)/2,
+                 var(2)/2,          -(var(7)-var(8)),
+                 var(7),            -(var(7)-var(8)),
+                 (var(7)-var(8)),   -var(7),
+                 (var(7)-var(8)),   -var(2)/2, 
+                 var(2)/2,          -var(2)/2,
+                ), var(5)),
+            amp.Outline(MM, 0, 5, (
+                 var(2)/2,           var(2)/2,
+                 var(2)/2,           (var(7)-var(8)),
+                 var(7),             (var(7)-var(8)),
+                 (var(7)-var(8)),    var(7),
+                 (var(7)-var(8)),    var(2)/2, 
+                 var(2)/2,           var(2)/2,
+                ), var(5)),
+            amp.Circle(MM, 0, 2*var(8), -var(7), -var(7), var(5)),
+            amp.Circle(MM, 0, 2*var(8), -var(7),  var(7), var(5)),
+            amp.Circle(MM, 0, 2*var(8),  var(7), -var(7), var(5)),
+            amp.Circle(MM, 0, 2*var(8),  var(7),  var(7), var(5)),
+            ), (
+                None, # 1
+                None, # 2
+                None, # 3
+                None, # 4
+                None, # 5
+                None, # 6
+                var(2)/2 - var(1)/2 + var(4),   # 7
+                var(4)+var(6),                  # 8
+                ))
+        corner_radius = (self.link_pad_width - self.link_trace_width)/3
+        main_ap = ApertureMacroInstance(alio_main_macro, (self.link_pad_width,         # 1
+                                                          self.pitch,                  # 2
+                                                          self.link_trace_width,       # 3
+                                                          corner_radius,               # 4
+                                                          rotation,                    # 5
+                                                          self.clearance), unit=MM)    # 6
+        main_ap_90 = ApertureMacroInstance(alio_main_macro, (self.link_pad_width,      # 1
+                                                          self.pitch,                  # 2
+                                                          self.link_trace_width,       # 3
+                                                          corner_radius,               # 4
+                                                          rotation-90,                 # 5
+                                                          self.clearance), unit=MM)    # 6
+        main_drill = ExcellonTool(self.drill, plated=True, unit=self.unit)
+        via_drill = ExcellonTool(self.via_size, plated=True, unit=self.unit)
+
+        # parameters: [1: total height = pad width, 2: total width, 3: trace width, 4: corner radius, 5: rotation]
+        alio_macro = ApertureMacro('ALIOP', (
+            amp.CenterLine(MM, 1, var(1)-2*var(4), var(1), 0, 0, var(5)),
+            amp.CenterLine(MM, 1, var(1), var(1)-2*var(4), 0, 0, var(5)),
+            amp.Circle(MM, 1, 2*var(4), -var(1)/2+var(4), -var(1)/2+var(4), var(5)),
+            amp.Circle(MM, 1, 2*var(4), -var(1)/2+var(4),  var(1)/2-var(4), var(5)),
+            amp.Circle(MM, 1, 2*var(4),  var(1)/2-var(4), -var(1)/2+var(4), var(5)),
+            amp.Circle(MM, 1, 2*var(4),  var(1)/2-var(4),  var(1)/2-var(4), var(5)),
+            amp.CenterLine(MM, 1, var(2), var(3), -var(2)/2 + var(1)/2, 0, var(5)),
+            ))
+        alio_dark = ApertureMacroInstance(alio_macro, (self.link_pad_width,         # 1
+                                                       self.pitch-self.clearance,   # 2
+                                                       self.link_trace_width,       # 3
+                                                       corner_radius,               # 4
+                                                       rotation), unit=MM)          # 5
+        alio_dark_90 = ApertureMacroInstance(alio_macro, (self.link_pad_width,          # 1
+                                                          self.pitch-self.clearance,    # 2
+                                                          self.link_trace_width,        # 3
+                                                          corner_radius,                # 4
+                                                          rotation+90), unit=MM)        # 5
+
+        # all layers are identical here
+        for side, use in (('top', 'copper'), ('top', 'mask'), ('bottom', 'copper'), ('bottom', 'mask')):
+            if side == 'top':
+                layer_stack[side, use].objects.insert(0, xf(Flash(0, 0, aperture=main_ap, unit=self.unit)))
+                if not self.border_y:
+                    layer_stack[side, use].objects.append(xf(Flash(self.pitch/2, self.pitch/2, aperture=alio_dark, unit=self.unit)))
+            else:
+                layer_stack[side, use].objects.insert(0, xf(Flash(0, 0, aperture=main_ap_90, unit=self.unit)))
+                if not self.border_x:
+                    layer_stack[side, use].objects.append(xf(Flash(self.pitch/2, self.pitch/2, aperture=alio_dark_90, unit=self.unit)))
+
+        layer_stack.drill_pth.append(Flash(x, y, aperture=main_drill, unit=self.unit))
+        if not (self.border_x or self.border_y):
+            layer_stack.drill_pth.append(xf(Flash(self.pitch/2, self.pitch/2, aperture=via_drill, unit=self.unit)))
+
+
+def convert_to_mm(value, unit):
+    unitl  = unit.lower()
+    if unitl == 'mm':
+        return value
+    elif unitl == 'cm':
+        return value*10
+    elif unitl == 'in':
+        return value*25.4
+    elif unitl == 'mil':
+        return value/1000*25.4
+    else:
+        raise ValueError(f'Invalid unit {unit}, allowed units are mm, cm, in, and mil.')
+
+
+_VALUE_RE = re.compile('([0-9]*\.?[0-9]+)(cm|mm|in|mil|%)')
+def eval_value(value, total_length=None):
+    if not isinstance(value, str):
+        return None
+
+    m = _VALUE_RE.match(value.lower())
+    number, unit = m.groups()
+    if unit == '%':
+        if total_length is None:
+            raise ValueError('Percentages are not allowed for this value')
+        return total_length * float(number) / 100
+    return convert_to_mm(float(number), unit)
+
+
+def _demo():
+    #pattern1 = PatternProtoArea(2.54, obj=THTPad.circle(0, 0, 0.9, 1.8, paste=False))
+    #pattern1 = PatternProtoArea(2.54, 2.54, obj=SpikyProto())
+    #pattern2 = PatternProtoArea(1.2, 2.0, obj=SMDPad.rect(0, 0, 1.0, 1.8, paste=False))
+    #pattern3 = PatternProtoArea(2.54, 1.27, obj=SMDPad.rect(0, 0, 2.3, 1.0, paste=False))
+    #pattern3 = EmptyProtoArea(copper_fill=True)
+    #stack = TwoSideLayout(pattern2, pattern3)
+    #pattern2 = PatternProtoArea(2.54, obj=PoweredProto(), margin=1)
+    #pattern3 = PatternProtoArea(2.54, obj=RFGroundProto())
+    #stack = PropLayout([pattern2, pattern3], 'h', [0.5, 0.5])
+    #pattern = PropLayout([pattern1, stack], 'h', [0.5, 0.5])
+    #pattern = PatternProtoArea(2.54, obj=ManhattanPads(2.54))
+    #pattern = PatternProtoArea(2.54*1.5, obj=THTFlowerProto())
+    #pattern = PatternProtoArea(2.54, obj=THTPad.circle(0, 0, 0.9, 1.8, paste=False))
+    #pattern = PatternProtoArea(2.54, obj=PoweredProto())
+    pattern = PatternProtoArea(2.54, obj=AlioCell(), margin=2)
+    pb = ProtoBoard(50, 47, pattern, mounting_hole_dia=3.2, mounting_hole_offset=5)
+    #pb = ProtoBoard(10, 10, pattern1)
+    print(pb.pretty_svg())
+    pb.layer_stack().save_to_directory('/tmp/testdir')
+
+
+if __name__ == '__main__':
+    _demo()
+    #cnt = alphabetic()()
+    #for _ in range(32):
+    #    for _ in range(26):
+    #        print(f'{next(cnt):>2}', end=' ', file=sys.stderr)
+    #    print(file=sys.stderr)
+

gerbonara/cad/protoserve.py

@@ -8,7 +8,6 @@ from quart import Quart, request, Response, send_file, abort
 
 from . import protoboard as pb
 from . import protoserve_data
-from .primitives import SMDStack
 from ..utils import MM, Inch
 
 
@@ -26,7 +25,7 @@ def extract_importlib(package):
             else:
                 assert item.is_dir()
                 item_out.mkdir()
-                stack.append((item, item_out))
+                stack.push((item, item_out))
 
     return root
 
@@ -63,10 +62,10 @@ def deserialize(obj, unit):
         case 'smd':
             match obj['pad_shape']:
                 case 'rect':
-                    stack = SMDStack.rect(pitch_x-clearance, pitch_y-clearance, paste=False, unit=unit)
+                    pad = pb.SMDPad.rect(0, 0, pitch_x-clearance, pitch_y-clearance, paste=False, unit=unit)
                 case 'circle':
-                    stack = SMDStack.circle(min(pitch_x, pitch_y)-clearance, paste=False, unit=unit)
+                    pad = pb.SMDPad.circle(0, 0, min(pitch_x, pitch_y)-clearance, paste=False, unit=unit)
-            return pb.PatternProtoArea(pitch_x, pitch_y, obj=stack, unit=unit)
+            return pb.PatternProtoArea(pitch_x, pitch_y, obj=pad, unit=unit)
 
         case 'tht':
             hole_dia = mil(float(obj['hole_dia']))
@@ -80,11 +79,11 @@ def deserialize(obj, unit):
 
             match obj['pad_shape']:
                 case 'rect':
-                    pad = pb.THTPad.rect(hole_dia, pitch_x-clearance, pitch_y-clearance, paste=False, plated=plated, unit=unit)
+                    pad = pb.THTPad.rect(0, 0, hole_dia, pitch_x-clearance, pitch_y-clearance, paste=False, plated=plated, unit=unit)
                 case 'circle':
-                    pad = pb.THTPad.circle(hole_dia, min(pitch_x, pitch_y)-clearance, paste=False, plated=plated, unit=unit)
+                    pad = pb.THTPad.circle(0, 0, hole_dia, min(pitch_x, pitch_y)-clearance, paste=False, plated=plated, unit=unit)
                 case 'obround':
-                    pad = pb.THTPad.obround(hole_dia, pitch_x-clearance, pitch_y-clearance, paste=False, plated=plated, unit=unit)
+                    pad = pb.THTPad.obround(0, 0, hole_dia, pitch_x-clearance, pitch_y-clearance, paste=False, plated=plated, unit=unit)
 
             if oneside:
                 pad.pad_bottom = None
@@ -107,8 +106,7 @@ def deserialize(obj, unit):
             pitch = mil(float(obj.get('pitch', 2.54)))
             hole_dia = mil(float(obj['hole_dia']))
             pattern_dia = mil(float(obj['pattern_dia']))
-            clearance = mil(float(obj['clearance']))
+            return pb.PatternProtoArea(2*pitch, 2*pitch, pb.THTFlowerProto(pitch, hole_dia, pattern_dia, unit=unit), unit=unit)
-            return pb.PatternProtoArea(pitch, pitch, pb.THTFlowerProto(pitch, hole_dia, pattern_dia, clearance, unit=unit), unit=unit)
 
         case 'spiky':
             return pb.PatternProtoArea(2.54, 2.54, pb.SpikyProto(), unit=unit)
@@ -129,20 +127,6 @@ def deserialize(obj, unit):
                     via_size=via_size
                 ), margin=unit(1.5, MM), unit=unit)
 
-        case 'breadboard':
-            horizontal = obj.get('direction', 'v') == 'h'
-            drill = float(obj.get('hole_dia', 0.9))
-            return pb.BreadboardArea(clearance=clearance, drill=drill, horizontal=horizontal, unit=unit)
-
-        case 'starburst':
-            trace_width_x = float(obj.get('trace_width_x', 1.8))
-            trace_width_y = float(obj.get('trace_width_y', 1.8))
-            drill = float(obj.get('hole_dia', 0.9))
-            annular_ring = float(obj.get('annular', 1.2))
-            clearance = float(obj.get('clearance', 0.4))
-            mask_width = float(obj.get('mask_width', 0.5))
-            return pb.PatternProtoArea(pitch_x, pitch_y, pb.StarburstPad(pitch_x, pitch_y, trace_width_x, trace_width_y, clearance, mask_width, drill, annular_ring, unit=unit), unit=unit)
-
         case 'rf':
             pitch = float(obj.get('pitch', 2.54))
             hole_dia = float(obj['hole_dia'])
@@ -155,7 +139,6 @@ def to_board(obj):
     w = float(obj.get('width', unit(100, MM)))
     h = float(obj.get('height', unit(80, MM)))
     corner_radius = float(obj.get('round_corners', {}).get('radius', unit(1.5, MM)))
-    margin = float(obj.get('margin', unit(2.0, MM)))
     holes = obj.get('mounting_holes', {})
     mounting_hole_dia = float(holes.get('diameter', unit(3.2, MM)))
     mounting_hole_offset = float(holes.get('offset', unit(5, MM)))
@@ -172,14 +155,13 @@ def to_board(obj):
                        corner_radius=corner_radius,
                        mounting_hole_dia=mounting_hole_dia,
                        mounting_hole_offset=mounting_hole_offset,
-                       margin=margin,
                        unit=unit)
 
-@app.route('/preview_<side>.svg', methods=['POST'])
+@app.route('/preview.svg', methods=['POST'])
-async def preview(side):
+async def preview():
     obj = await request.get_json()
     board = to_board(obj)
-    return Response(str(board.pretty_svg(side=side)), mimetype='image/svg+xml')
+    return Response(str(board.pretty_svg()), mimetype='image/svg+xml')
 
 @app.route('/gerbers.zip', methods=['POST'])
 async def gerbers():
@@ -190,10 +172,7 @@ async def gerbers():
         board.layer_stack().save_to_zipfile(f)
         return Response(f.read_bytes(), mimetype='image/svg+xml')
 
-def main():
-    app.run()
-
 
 if __name__ == '__main__':
-    main()
+    app.run()
 

gerbonara/cad/protoserve_data/protoserve.html

@@ -177,14 +177,11 @@ input[type="text"]:focus:valid {
     position: relative;
     grid-area: main;
     padding: 20px;
-    display: flex;
-    flex-direction: column;
-    flex-wrap: wrap;
-    align-items: stretch;
 }
 
-#preview > img {
+#preview-image {
-    flex-grow: 1;
+    width: 100%;
+    height: 100%;
     object-fit: contain;
 }
 
@@ -283,12 +280,6 @@ input[type="text"]:focus:valid {
                         <span class="unit us">inch</span>
                     </label>
 
-                    <label>Margin
-                        <input type="text" placeholder="margin" name="margin" value="2.0" pattern="[0-9]+\.?[0-9]*"/>
-                        <span class="unit metric">mm</span> 
-                        <span class="unit us">inch</span> 
-                    </label>
-
                     <div class="group expand" data-group="round_corners">
                         <label>Round corners
                             <input name="enabled" type="checkbox" checked/>
@@ -325,8 +316,7 @@ input[type="text"]:focus:valid {
             </form>
         </div>
         <div id="preview">
-            <img id="preview-image-top" alt="Automatically generated top side preview image"/>
+            <img id="preview-image" alt="Automatically generated preview image"/>
-            <img id="preview-image-bottom" alt="Automatically generated bottom side preview image"/>
             <div id="preview-message"></div>
         </div>
         <div id="links">
@@ -411,8 +401,6 @@ input[type="text"]:focus:valid {
                     <a href="#" data-placeholder="rf" class="double-sided-only">RF THT area</a>
                     <a href="#" data-placeholder="spiky" class="double-sided-only">Spiky hybrid area</a>
                     <a href="#" data-placeholder="alio" class="double-sided-only">ALio hybrid area</a>
-                    <a href="#" data-placeholder="starburst" class="double-sided-only">THT starburst area</a>
-                    <a href="#" data-placeholder="breadboard" class="double-sided-only">Permanent breadboard area</a>
                 </div>
             </div>
         </template>
@@ -480,7 +468,7 @@ input[type="text"]:focus:valid {
                     <span class="unit us">mil</span>
                 </label>
                 <label>Plating
-                    <select name="plating" value="plated">
+                    <select name="plating" value="through">
                         <option value="plated">Double-sided, through-plated</option>
                         <option value="nonplated">Double-sided, non-plated</option>
                         <option value="singleside">Single-sided, non-plated</option>
@@ -506,34 +494,6 @@ input[type="text"]:focus:valid {
             </div>
         </template>
 
-        <template id="tpl-g-breadboard">
-            <div data-type="breadboard" class="group breadboard">
-                <h4>Permanent breadboard area</h4>
-                <span class="content area-controls">(<a href="#" class="area-remove">Remove</a><a href="#" class="area-move">Move</a>)</span>
-                <label class="proportion">Proportion
-                    <input type="text" name="layout_prop" value="1" pattern="[0-9]+\.?[0-9]*"/>
-                </label>
-
-                <h5>Area Settings</h5>
-                <label>Direction
-                    <select name="direction" value="v">
-                        <option value="v">Vertical</option>
-                        <option value="h">Horizontal</option>
-                    </select>
-                </label>
-                <label>Clearance
-                    <input type="text" name="clearance" placeholder="length" value="0.5" pattern="[0-9]+\.?[0-9]*"/>
-                    <span class="unit metric">mm</span>
-                    <span class="unit us">mil</span>
-                </label>
-                <label>Hole diameter
-                    <input type="text" name="hole_dia" placeholder="length" value="0.9" pattern="[0-9]+\.?[0-9]*"/>
-                    <span class="unit metric">mm</span>
-                    <span class="unit us">mil</span>
-                </label>
-            </div>
-        </template>
-
         <template id="tpl-g-manhattan">
             <div data-type="manhattan" class="group manhattan">
                 <h4>Manhattan area</h4>
@@ -739,58 +699,6 @@ input[type="text"]:focus:valid {
             </div>
         </template>
 
-        <template id="tpl-g-starburst">
-            <div data-type="starburst" class="group starburst">
-                <h4>Starburst area</h4>
-                <span class="content area-controls">(<a href="#" class="area-remove">Remove</a><a href="#" class="area-move">Move</a>)</span>
-                <label class="proportion">Proportion
-                    <input type="text" name="layout_prop" value="1" pattern="[0-9]+\.?[0-9]*"/>
-                </label>
-
-                <h5>Area Settings</h5>
-                <label>Pitch X
-                    <input type="text" name="pitch_x" placeholder="length" value="2.54" pattern="[0-9]+\.?[0-9]*"/>
-                    <span class="unit metric">mm</span>
-                    <span class="unit us">mil</span>
-                </label>
-                <label>Pitch Y
-                    <input type="text" name="pitch_y" placeholder="length" value="2.54" pattern="[0-9]+\.?[0-9]*"/>
-                    <span class="unit metric">mm</span>
-                    <span class="unit us">mil</span>
-                </label>
-                <label>Drill diameter
-                    <input type="text" name="drill" placeholder="length" value="0.9" pattern="[0-9]+\.?[0-9]*"/>
-                    <span class="unit metric">mm</span>
-                    <span class="unit us">mil</span>
-                </label>
-                <label>Annular ring
-                    <input type="text" name="annular" placeholder="length" value="1.2" pattern="[0-9]+\.?[0-9]*"/>
-                    <span class="unit metric">mm</span>
-                    <span class="unit us">mil</span>
-                </label>
-                <label>Pad clearance
-                    <input type="text" name="clearance" placeholder="length" value="0.4" pattern="[0-9]+\.?[0-9]*"/>
-                    <span class="unit metric">mm</span>
-                    <span class="unit us">mil</span>
-                </label>
-                <label>Soldermask wall
-                    <input type="text" name="mask_width" placeholder="length" value="0.5" pattern="[0-9]+\.?[0-9]*"/>
-                    <span class="unit metric">mm</span>
-                    <span class="unit us">mil</span>
-                </label>
-                <label>Trace width X
-                    <input type="text" name="trace_width_x" placeholder="length" value="1.40" pattern="[0-9]+\.?[0-9]*"/>
-                    <span class="unit metric">mm</span>
-                    <span class="unit us">mil</span>
-                </label>
-                <label>Trace width Y
-                    <input type="text" name="trace_width_y" placeholder="length" value="1.40" pattern="[0-9]+\.?[0-9]*"/>
-                    <span class="unit metric">mm</span>
-                    <span class="unit us">mil</span>
-                </label>
-            </div>
-        </template>
-
         <script>
             document.querySelectorAll('.expand').forEach((elem) => {
                 const checkbox = elem.querySelector(':first-child > input');
@@ -1077,43 +985,26 @@ input[type="text"]:focus:valid {
                 }
             }
 
-            let previewTopBlobURL = null;
+            let previewBlobURL = null;
-            let previewBotBlobURL = null;
             previewReloader = new RateLimiter(async () => {
                 if (document.querySelector('form').checkValidity()) {
                     document.querySelector('#preview-message').textContent = 'Reloading...';
                     document.querySelector('#preview-message').classList.add('loading');
-
+                    const response = await fetch('preview.svg', {
-                    const response_top = await fetch('preview_top.svg', {
                         method: 'POST',
                         mode: 'same-origin',
                         cache: 'no-cache',
                         headers: {'Content-Type': 'application/json'},
                         body: serialize(),
                     });
-                    const data_top = await response_top.blob();
+                    const data = await response.blob();
-                    if (previewTopBlobURL) {
+                    if (previewBlobURL) {
-                        URL.revokeObjectURL(previewTopBlobURL);
+                        URL.revokeObjectURL(previewBlobURL);
                     }
-                    previewTopBlobURL = URL.createObjectURL(data_top);
+                    previewBlobURL = URL.createObjectURL(data);
-                    document.querySelector('#preview-image-top').src = previewTopBlobURL;
+                    document.querySelector('#preview-image').src = previewBlobURL;
-
                     document.querySelector('#preview-message').textContent = '';
                     document.querySelector('#preview-message').classList.remove('loading');
-
-                    const response_bot = await fetch('preview_bottom.svg', {
-                        method: 'POST',
-                        mode: 'same-origin',
-                        cache: 'no-cache',
-                        headers: {'Content-Type': 'application/json'},
-                        body: serialize(),
-                    });
-                    const data_bot = await response_bot.blob();
-                    if (previewBotBlobURL) {
-                        URL.revokeObjectURL(previewBotBlobURL);
-                    }
-                    previewBotBlobURL = URL.createObjectURL(data_bot);
-                    document.querySelector('#preview-image-bottom').src = previewBotBlobURL;
                 } else {
                     document.querySelector('#preview-message').classList.add('loading');
                     document.querySelector('#preview-message').textContent = 'Please correct any invalid fields.';

gerbonara/cam.py

@@ -26,7 +26,7 @@ import shutil
 from pathlib import Path
 from functools import cached_property
 
-from .utils import LengthUnit, MM, Inch, Tag, sum_bounds, setup_svg, convex_hull
+from .utils import LengthUnit, MM, Inch, Tag, sum_bounds, setup_svg
 from . import graphic_primitives as gp
 from . import graphic_objects as go
 
@@ -60,9 +60,6 @@ class FileSettings:
     #: If you want to export the macros with their original formulaic expressions (which is completely fine by the
     #: Gerber standard, btw), set this parameter to ``False`` before exporting.
     calculate_out_all_aperture_macros: bool = True
-    #: Internal field used to communicate if only decimal coordinates were found inside an Excellon file, or if it
-    #: contained at least some coordinates in fixed-width notation.
-    _file_has_fixed_width_coordinates: bool = False
 
     # input validation
     def __setattr__(self, name, value):
@@ -351,24 +348,6 @@ class CamFile:
 
         return sum_bounds(( p.bounding_box(unit) for p in self.objects ), default=default)
 
-    def convex_hull(self, tol=0.01, unit=None):
-        unit = unit or self.unit
-        points = []
-
-        for obj in self.objects:
-            if isinstance(obj, go.Line):
-                line = obj.as_primitive(unit)
-                points.append((line.x1, line.y1))
-                points.append((line.x2, line.y2))
-
-            elif isinstance(obj, go.Arc):
-                for obj in obj.approximate(tol, unit):
-                    line = obj.as_primitive(unit)
-                    points.append((line.x1, line.y1))
-                    points.append((line.x2, line.y2))
-
-        return convex_hull(points)
-
     def to_excellon(self):
         """ Convert to a :py:class:`.ExcellonFile`. Returns ``self`` if it already is one. """
         raise NotImplementedError()

gerbonara/cli.py

@@ -23,10 +23,7 @@ import dataclasses
 import re
 import warnings
 import json
-import sys
 import itertools
-import webbrowser
-import warnings
 from pathlib import Path
 
 from .utils import MM, Inch
@@ -36,21 +33,8 @@ from . import layers as lyr
 from . import __version__
 from .cad.kicad import schematic as kc_schematic
 from .cad.kicad import tmtheme
-from .cad import protoserve
 
 
-def _showwarning(message, category, filename, lineno, file=None, line=None):
-    if file is None:
-        file = sys.stderr
-
-    filename = Path(filename)
-    gerbonara_module_install_location = Path(__file__).parent.parent
-    if filename.is_relative_to(gerbonara_module_install_location):
-        filename = filename.relative_to(gerbonara_module_install_location)
-
-    print(f'{filename}:{lineno}: {message}', file=file)
-warnings.showwarning = _showwarning
-
 def _print_version(ctx, param, value):
     if value and not ctx.resilient_parsing:
         click.echo(f'Version {__version__}')
@@ -146,23 +130,6 @@ def cli():
     well as sets of those files """
     pass
 
-@cli.group('protoboard')
-def protoboard_group():
-    pass
-
-
-@protoboard_group.command()
-@click.option('-h', '--host', default=None, help='Hostname to listen on. Defaults to localhost.')
-@click.option('-p', '--port', type=int, default=1337, help='Port to listen on. Defaults to 1337')
-def interactive(host, port):
-    ''' Launch gerbonar's interactive protoboard designer in your browser '''
-    
-    if host is None:
-        @protoserve.app.before_serving
-        async def open_browser():
-            webbrowser.open_new(f'http://localhost:{port}/')
-    protoserve.app.run(host=host, port=port, use_reloader=False, debug=False)
-
 
 @cli.group('kicad')
 def kicad_group():
@@ -338,9 +305,9 @@ def rewrite(transform, command_line_units, number_format, units, zero_suppressio
               scheme instead of keeping the old file names.''')
 @click.argument('transform')
 @click.argument('inpath')
-@click.argument('outpath', type=click.Path(path_type=Path))
+@click.argument('outpath')
-def transform(transform, units, output_format, inpath, outpath, format_warnings, input_map, use_builtin_name_rules,
+def transform(transform, units, output_format, inpath, outpath,
-              output_naming_scheme, number_format, force_zip):
+            format_warnings, input_map, use_builtin_name_rules, output_naming_scheme):
     """ Transform all gerber files in a given directory or zip file using the given python transformation script.
         
         In the python transformation script you have access to the functions translate(x, y), scale(factor) and
@@ -355,26 +322,16 @@ def transform(transform, units, output_format, inpath, outpath, format_warnings,
     with warnings.catch_warnings():
         warnings.simplefilter(format_warnings)
         if force_zip:
-            stack = lyr.LayerStack.open_zip(inpath, overrides=overrides, autoguess=use_builtin_name_rules)
+            stack = lyr.LayerStack.open_zip(path, overrides=overrides, autoguess=use_builtin_name_rules)
         else:
-            stack = lyr.LayerStack.open(inpath, overrides=overrides, autoguess=use_builtin_name_rules)
+            stack = lyr.LayerStack.open(path, overrides=overrides, autoguess=use_builtin_name_rules)
 
     _apply_transform(transform, units, stack)
 
     output_format = None if output_format == 'reuse' else FileSettings.defaults()
-    if number_format:
+    stack.save_to_directory(outpath, naming_scheme=output_naming_scheme or {},
-        if output_format is None:
+                            gerber_settings=output_format,
-            output_format = FileSettings.defaults()
+                            excellon_settings=dataclasses.replace(output_format, zeros=None))
-        a, _, b = number_format.partition('.')
-        output_format.number_format = (int(a), int(b))
-    if outpath.is_file() or outpath.suffix.lower() == '.zip':
-        stack.save_to_zipfile(outpath, naming_scheme=output_naming_scheme or {},
-                                gerber_settings=output_format,
-                                excellon_settings=dataclasses.replace(output_format, zeros=None))
-    else:
-        stack.save_to_directory(outpath, naming_scheme=output_naming_scheme or {},
-                                gerber_settings=output_format,
-                                excellon_settings=dataclasses.replace(output_format, zeros=None))
 
 
 @cli.command()
@@ -455,7 +412,7 @@ def merge(inpath, outpath, offset, rotation, input_map, command_line_units, outp
 @click.option('--version', is_flag=True, callback=_print_version, expose_value=False, is_eager=True)
 @click.option('--warnings', 'format_warnings', type=click.Choice(['default', 'ignore', 'once']), default='default',
               help='''Enable or disable file format warnings during parsing (default: on)''')
-@click.option('--units', type=Unit(), default='metric', help='Output bounding box in this unit (default: millimeter)')
+@click.option('--units', type=Unit(), help='Output bounding box in this unit (default: millimeter)')
 @click.option('--input-number-format', help='Override number format of input file (mostly useful for Excellon files)')
 @click.option('--input-units', type=Unit(), help='Override units of input file')
 @click.option('--input-zero-suppression', type=click.Choice(['off', 'leading', 'trailing']), help='Override zero suppression setting of input file')

gerbonara/excellon.py

@@ -30,10 +30,9 @@ from pathlib import Path
 
 from .cam import CamFile, FileSettings
 from .graphic_objects import Flash, Line, Arc
-from .apertures import ExcellonTool, CircleAperture
+from .apertures import ExcellonTool
 from .utils import Inch, MM, to_unit, InterpMode, RegexMatcher
 
-
 class ExcellonContext:
     """ Internal helper class used for tracking graphics state when writing Excellon. """
 
@@ -269,19 +268,17 @@ class ExcellonFile(CamFile):
         """ Counterpart to :py:meth:`~.rs274x.GerberFile.to_excellon`. Does nothing and returns :py:obj:`self`. """
         return self
 
-    def to_gerber(self, errors='raise'):
+    def to_gerber(self, errros='raise'):
         """ Convert this excellon file into a :py:class:`~.rs274x.GerberFile`. """
-        from .rs274x import GerberFile
         out = GerberFile()
         out.comments = self.comments
 
         apertures = {}
         for obj in self.objects:
-            if not (ap := apertures.get(obj.tool)):
+            if not (ap := apertures[obj.tool]):
-                ap = apertures[obj.tool] = CircleAperture(obj.tool.diameter, unit=obj.aperture.unit)
+                ap = apertures[obj.tool] = CircleAperture(obj.tool.diameter)
 
             out.objects.append(dataclasses.replace(obj, aperture=ap))
-        return out
 
     @property
     def generator(self):
@@ -328,7 +325,7 @@ class ExcellonFile(CamFile):
             for fn in 'nc_param.txt', 'ncdrill.log':
                 if (param_file := filename.parent / fn).is_file():
                     settings =  parse_allegro_ncparam(param_file.read_text())
-                    warnings.warn(f'Loaded allegro-style excellon settings file {param_file}', SyntaxWarning)
+                    warnings.warn(f'Loaded allegro-style excellon settings file {param_file}')
                     break
 
             # Parse Zuken log file for settings
@@ -336,7 +333,7 @@ class ExcellonFile(CamFile):
                 logfile = filename.with_suffix('.fdl')
                 if logfile.is_file():
                     settings = parse_zuken_logfile(logfile.read_text())
-                    warnings.warn(f'Loaded zuken-style excellon log file {logfile}: {settings}', SyntaxWarning)
+                    warnings.warn(f'Loaded zuken-style excellon log file {logfile}: {settings}')
 
         if external_tools is None:
             # Parse allegro log files for tools.
@@ -379,7 +376,7 @@ class ExcellonFile(CamFile):
 
         mixed_plating = (len({ tool.plated for tool in tool_map.values() }) > 1)
         if mixed_plating:
-            warnings.warn('Multiple plating values in same file. Will use non-standard Altium comment syntax to indicate hole plating.', SyntaxWarning)
+            warnings.warn('Multiple plating values in same file. Will use non-standard Altium comment syntax to indicate hole plating.')
 
         defined_tools = {}
         tool_indices = {}
@@ -569,8 +566,6 @@ class ExcellonParser(object):
         self.filename = None
         self.external_tools = external_tools or {}
         self.found_kicad_format_comment = False
-        self.allegro_eof_toolchange_hack = False
-        self.allegro_eof_toolchange_hack_index = 1
 
     def warn(self, msg):
         warnings.warn(f'{self.filename}:{self.lineno} "{self.line}": {msg}', SyntaxWarning)
@@ -611,25 +606,18 @@ class ExcellonParser(object):
     exprs = RegexMatcher()
 
     # NOTE: These must be kept before the generic comment handler at the end of this class so they match first.
-    @exprs.match(r';(?P<index1_prefix>T(?P<index1>[0-9]+))?\s+Holesize (?P<index2>[0-9]+)\. = (?P<diameter>[0-9/.]+) Tolerance = \+[0-9/.]+/-[0-9/.]+ (?P<plated>PLATED|NON_PLATED|OPTIONAL) (?P<unit>MILS|MM) Quantity = [0-9]+')
+    @exprs.match(r';T(?P<index1>[0-9]+) Holesize (?P<index2>[0-9]+)\. = (?P<diameter>[0-9/.]+) Tolerance = \+[0-9/.]+/-[0-9/.]+ (?P<plated>PLATED|NON_PLATED|OPTIONAL) (?P<unit>MILS|MM) Quantity = [0-9]+')
     def parse_allegro_tooldef(self, match):
         # NOTE: We ignore the given tolerances here since they are non-standard.
         self.program_state = ProgramState.HEADER # TODO is this needed? we need a test file.
         self.generator_hints.append('allegro')
 
-        index = int(match['index2'])
+        if (index := int(match['index1'])) != int(match['index2']): # index1 has leading zeros, index2 not.
-
-        if match['index1'] and index != int(match['index1']): # index1 has leading zeros, index2 not.
             raise SyntaxError('BUG: Allegro excellon tool def has mismatching tool indices. Please file a bug report on our issue tracker and provide this file!')
 
         if index in self.tools:
             self.warn('Re-definition of tool index {index}, overwriting old definition.') 
 
-        if not match['index1_prefix']:
-            # This is a really nasty orcad file without tool change commands, that instead just puts all holes in order
-            # of the hole size definitions with M00's in between.
-            self.allegro_eof_toolchange_hack = True
-
         # NOTE: We map "optionally" plated holes to plated holes for API simplicity. If you hit a case where that's a
         # problem, please raise an issue on our issue tracker, explain why you need this and provide an example file.
         is_plated = None if match['plated'] is None else (match['plated'] in ('PLATED', 'OPTIONAL'))
@@ -642,19 +630,13 @@ class ExcellonParser(object):
         else:
             unit = MM
 
-        if self.settings.unit is None:
+        if unit != self.settings.unit:
-            self.settings.unit = unit
-
-        elif unit != self.settings.unit:
             self.warn('Allegro Excellon drill file tool definitions in {unit.name}, but file parameters say the '
                     'file should be in {settings.unit.name}. Please double-check that this is correct, and if it is, '
                     'please raise an issue on our issue tracker.')
 
         self.tools[index] = ExcellonTool(diameter=diameter, plated=is_plated, unit=unit)
 
-        if self.allegro_eof_toolchange_hack and self.active_tool is None:
-            self.active_tool = self.tools[index]
-
     # Searching Github I found that EasyEDA has two different variants of the unit specification here.
     @exprs.match(';Holesize (?P<index>[0-9]+) = (?P<diameter>[.0-9]+) (?P<unit>INCH|inch|METRIC|mm)')
     def parse_easyeda_tooldef(self, match):
@@ -771,12 +753,6 @@ class ExcellonParser(object):
     def handle_end_of_program(self, match):
         if self.program_state in (None, ProgramState.HEADER):
             self.warn('M30 statement found before end of header.')
-
-        if self.allegro_eof_toolchange_hack:
-            self.allegro_eof_toolchange_hack_index = min(max(self.tools), self.allegro_eof_toolchange_hack_index + 1)
-            self.active_tool = self.tools[self.allegro_eof_toolchange_hack_index]
-            return
-
         self.program_state = ProgramState.FINISHED
         # TODO: maybe add warning if this is followed by other commands.
 
@@ -786,17 +762,14 @@ class ExcellonParser(object):
     def do_move(self, coord_groups):
         x_s, x, y_s, y = coord_groups
 
-        if (x is not None and '.' not in x) or (y is not None and '.' not in y):
+        if self.settings.number_format == (None, None) and '.' not in x:
-            self.settings._file_has_fixed_width_coordinates = True
+            # TARGET3001! exports zeros as "00" even when it uses an explicit decimal point everywhere else.
-
+            if x != '00':
-            if self.settings.number_format == (None, None):
+                raise SyntaxError('No number format set and value does not contain a decimal point. If this is an Allegro '
-                # TARGET3001! exports zeros as "00" even when it uses an explicit decimal point everywhere else.
+                    'Excellon drill file make sure either nc_param.txt or ncdrill.log ends up in the same folder as '
-                if x != '00':
+                    'it, because Allegro does not include this critical information in their Excellon output. If you '
-                    raise SyntaxError('No number format set and value does not contain a decimal point. If this is an Allegro '
+                    'call this through ExcellonFile.from_string, you must manually supply from_string with a '
-                        'Excellon drill file make sure either nc_param.txt or ncdrill.log ends up in the same folder as '
+                    'FileSettings object from excellon.parse_allegro_ncparam.')
-                        'it, because Allegro does not include this critical information in their Excellon output. If you '
-                        'call this through ExcellonFile.from_string, you must manually supply from_string with a '
-                        'FileSettings object from excellon.parse_allegro_ncparam.')
 
         x = self.settings.parse_gerber_value(x)
         if x_s:
@@ -890,17 +863,12 @@ class ExcellonParser(object):
                 # from https://math.stackexchange.com/a/1781546
                 if a_s:
                     raise ValueError('Negative arc radius given')
-                r = self.settings.parse_gerber_value(a)
+                r = settings.parse_gerber_value(a)
                 x1, y1 = start
                 x2, y2 = end
                 dx, dy = (x2-x1)/2, (y2-y1)/2
                 x0, y0 = x1+dx, y1+dy
-                d = math.hypot(dx, dy)
+                f = math.hypot(dx, dy) / math.sqrt(r**2 - a**2)
-                if d == 0:
-                    raise ValueError('Arc radius notation requires distinct start and end points')
-                if r < d:
-                    raise ValueError('Arc radius too small for endpoint distance')
-                f = math.sqrt(r**2 - d**2) / d
                 if clockwise:
                     cx = x0 + f*dy
                     cy = y0 - f*dx
@@ -910,16 +878,16 @@ class ExcellonParser(object):
                 i, j = cx-start[0], cy-start[1]
 
             else: # explicit center given
-                i = self.settings.parse_gerber_value(i) or 0
+                i = settings.parse_gerber_value(i)
                 if i_s:
                     i = -i
-                j = self.settings.parse_gerber_value(j) or 0
+                j = settings.parse_gerber_value(j)
                 if j_s:
-                    j = -j
+                    j = -i
 
-            self.objects.append(Arc(*start, *end, i, j, clockwise, self.active_tool, unit=self.settings.unit))
+            self.objects.append(Arc(*start, *end, i, j, True, self.active_tool, unit=self.settings.unit))
 
-    @exprs.match(r'(M71|METRIC|M72|INCH)(,LZ|,TZ)?(,([0-9]+\.[0-9]+|0*\.0*))?')
+    @exprs.match(r'(M71|METRIC|M72|INCH)(,LZ|,TZ)?(,0*\.0*)?')
     def parse_easyeda_format(self, match):
         metric = match[1] in ('METRIC', 'M71')
 
@@ -932,10 +900,7 @@ class ExcellonParser(object):
         # This is used by newer autodesk eagles, fritzing and diptrace
         if match[3]:
             integer, _, fractional = match[3][1:].partition('.')
-            if integer.strip('0') or fractional.strip('0'):
+            self.settings.number_format = len(integer), len(fractional)
-                self.settings.number_format = int(integer), int(fractional)
-            else:
-                self.settings.number_format = len(integer), len(fractional)
 
         elif self.settings.number_format == (None, None) and not metric and not self.found_kicad_format_comment:
             self.warn('Using implicit number format from bare "INCH" statement. This is normal for Fritzing, Diptrace, Geda and pcb-rnd.')
@@ -961,10 +926,10 @@ class ExcellonParser(object):
     @exprs.match('(FMAT|VER),?([0-9]*)')
     def handle_command_format(self, match):
         if match[1] == 'FMAT':
-            # We only use FMAT as a compatibility marker. Version 1 drill files encountered in the wild still use the
+            # We do not support integer/fractional decimals specification via FMAT because that's stupid. If you need this,
-            # same coordinate and routing statements that we already support, so rejecting the header unconditionally
+            # please raise an issue on our issue tracker, provide a sample file and tell us where on earth you found that
-            # needlessly breaks otherwise parseable files.
+            # file.
-            if match[2] not in ('', '1', '2'):
+            if match[2] not in ('', '2'):
                 raise SyntaxError(f'Unsupported FMAT format version {match[2]}')
 
         else: # VER
@@ -993,19 +958,6 @@ class ExcellonParser(object):
         else:
             self.warn('Bare coordinate after end of file')
 
-    @exprs.match(xy_coord + 'G85' + xy_coord)
-    def handle_g85_slot(self, match):
-        if self.program_state == ProgramState.HEADER:
-            return
-
-        self.do_move(match.groups()[:4])
-        start, end = self.do_move(match.groups()[4:])
-
-        if not self.ensure_active_tool():
-            return
-
-        self.objects.append(Line(*start, *end, self.active_tool, unit=self.settings.unit))
-
     @exprs.match(r'DETECT,ON|ATC,ON|M06')
     def parse_zuken_legacy_statements(self, match):
         self.generator_hints.append('zuken')

gerbonara/graphic_objects.py

@@ -307,7 +307,6 @@ class Region(GraphicObject):
 
     def _offset(self, dx, dy):
         self.outline = [ (x+dx, y+dy) for x, y in self.outline ]
-        self.arc_centers = [ (c[0], (c[1][0]+dx, c[1][1]+dy)) if c else None for c in self.arc_centers ]
 
     def _rotate(self, angle, cx=0, cy=0):
         self.outline = [ gp.rotate_point(x, y, angle, cx, cy) for x, y in self.outline ]
@@ -323,7 +322,7 @@ class Region(GraphicObject):
 
     def close(self):
         if self.outline and self.outline[-1] != self.outline[0]:
-            self.outline.append(self.outline[0])
+            self.outline.append(self.outline[-1])
             if self.arc_centers:
                 self.arc_centers.append((None, (None, None)))
 
@@ -337,9 +336,8 @@ class Region(GraphicObject):
             ], unit=unit)
 
     @classmethod
-    def from_arc_poly(kls, arc_poly, polarity_dark=None, unit=MM):
+    def from_arc_poly(kls, arc_poly, polarity_dark=True, unit=MM):
-        polarity = arc_poly.polarity_dark if polarity_dark is None else polarity_dark
+        return kls(arc_poly.outline, arc_poly.arc_centers, polarity_dark=polarity_dark, unit=unit)
-        return kls(arc_poly.outline, arc_poly.arc_centers, polarity_dark=polarity, unit=unit)
 
     def append(self, obj):
         if obj.unit != self.unit:

gerbonara/graphic_primitives.py

@@ -62,12 +62,6 @@ class GraphicPrimitive:
 
         raise NotImplementedError()
 
-    def is_zero_size(self):
-        """ Return whether this primitive is zero size
-
-        :rtype: bool
-        """
-
 
 @dataclass(frozen=True)
 class Circle(GraphicPrimitive):
@@ -87,11 +81,7 @@ class Circle(GraphicPrimitive):
 
     def to_arc_poly(self):
         return ArcPoly([(self.x-self.r, self.y), (self.x+self.r, self.y)],
-                       [(True, (self.x, self.y)), (True, (self.x, self.y))],
+                       [(True, (self.x, self.y)), (True, (self.x, self.y))])
-                       polarity_dark=self.polarity_dark)
-
-    def is_zero_size(self):
-        return math.isclose(self.r, 0)
 
 
 @dataclass(frozen=True)
@@ -130,14 +120,14 @@ class ArcPoly(GraphicPrimitive):
 
     def approximate_arcs(self, max_error=1e-2, clip_max_error=True):
         outline = []
-        for (x1, y1), (x2, y2), (clockwise, (cx, cy)) in self.segments:
+        for p1, p2, (clockwise, center) in self.segments():
             if clockwise is None:
-                outline.append((x1, y1))
+                outline.append(p1)
             else:
                 outline.extend(approximate_arc(cx, cy, x1, y1, x2, y2, clockwise,
                                                max_error=max_error, clip_max_error=clip_max_error))
                 outline.pop() # remove arc end point
-        return type(self)(outline, polarity_dark=self.polarity_dark)
+        return type(self)(outline)
 
     def bounding_box(self):
         bbox = (None, None), (None, None)
@@ -189,20 +179,6 @@ class ArcPoly(GraphicPrimitive):
         return self
 
 
-    def is_zero_size(self):
-        for (x1, y1), (x2, y2), (clockwise, (cx, cy)) in self.segments:
-            if clockwise is not None: # arc
-                if math.isclose(cx, x1) and math.isclose(cy, y1):
-                    continue
-                
-                if math.isclose(x1, x2) and math.isclose(y1, y2):
-                    return False
-
-        if math.isclose(polygon_area(self.outline), 0):
-            return True
-        return False
-
-
 @dataclass(frozen=True)
 class Line(GraphicPrimitive):
     """ Straight line with round end caps. """
@@ -242,33 +218,24 @@ class Line(GraphicPrimitive):
         color = fg if self.polarity_dark else bg
         width = f'{self.width:.6}' if not math.isclose(self.width, 0) else '0.01mm'
         return tag('path', d=f'M {float(self.x1):.6} {float(self.y1):.6} L {float(self.x2):.6} {float(self.y2):.6}',
-                fill='none', stroke=color, stroke_width=str(width), stroke_linecap='round')
+                fill='none', stroke=color, stroke_width=str(width))
 
     def to_arc_poly(self):
         l = math.dist((self.x1, self.y1), (self.x2, self.y2))
-        if math.isclose(l, 0):
-            # degenerate case: a zero-length line becomes a circle.
-            return ArcPoly([(self.x1-self.width/2, self.y1), (self.x1+self.width/2, self.y1)],
-                           [(True, (self.x1, self.y1)), (True, (self.x1, self.y1))],
-                           polarity_dark=self.polarity_dark)
-
         dx, dy = self.x2-self.x1, self.y2-self.y1
         nx, ny = -dy/l, dx/l
         rx, ry = nx*self.width/2, ny*self.width/2
         return ArcPoly([
-                    (self.x2+rx, self.y2+ry),
-                    (self.x2-rx, self.y2-ry),
-                    (self.x1-rx, self.y1-ry),
                     (self.x1+rx, self.y1+ry),
+                    (self.x1-rx, self.y1-ry),
+                    (self.x2-rx, self.y2-ry),
+                    (self.x2+rx, self.y2+ry),
                 ], [
-                    (True, (self.x2, self.y2)),
-                    None,
                     (True, (self.x1, self.y1)),
                     None,
-                ], polarity_dark=self.polarity_dark)
+                    (True, (self.x2, self.y2)),
-
+                    None,
-    def is_zero_size(self):
+                ])
-        return math.isclose(self.x1, self.x2) and math.isclose(self.y1, self.y2)
 
 
 @dataclass(frozen=True)
@@ -309,35 +276,25 @@ class Arc(GraphicPrimitive):
         arc = svg_arc((self.x1, self.y1), (self.x2, self.y2), (self.cx, self.cy), self.clockwise)
         width = f'{self.width:.6}' if not math.isclose(self.width, 0) else '0.01mm'
         return tag('path', d=f'M {float(self.x1):.6} {float(self.y1):.6} {arc}',
-                fill='none', stroke=color, stroke_width=width, stroke_linecap='round')
+                fill='none', stroke=color, stroke_width=width)
 
     def to_arc_poly(self):
         r = math.dist((self.x1, self.y1), (self.cx, self.cy))
-
-        if math.isclose(r, 0):
-            # degenerate case: a zero-radius arc becomes a circle.
-            return ArcPoly([(self.x1-self.width/2, self.y1), (self.x1+self.width/2, self.y1)],
-                           [(True, (self.x1, self.y1)), (True, (self.x1, self.y1))],
-                           polarity_dark=self.polarity_dark)
-
         dx1, dy1 = self.x1-self.cx, self.y1-self.cy
         nx1, ny1 = dx1/r * self.width/2, dy1/r * self.width/2
         dx2, dy2 = self.x2-self.cx, self.y2-self.cy
         nx2, ny2 = dx2/r * self.width/2, dy2/r * self.width/2
-        return ArcPoly([ # vertices
+        return ArcPoly([
-                    (self.x1+nx1, self.y1+ny1),
+                    (self.x1+nx1, self.y1+nx1),
-                    (self.x1-nx1, self.y1-ny1),
+                    (self.x1-nx1, self.y1-nx1),
-                    (self.x2-nx2, self.y2-ny2),
+                    (self.x2-nx2, self.y2-nx2),
-                    (self.x2+nx2, self.y2+ny2),
+                    (self.x2+nx2, self.y2+nx2),
-                ], [ # arc segments (direction, center)
+                ], [
-                    (not self.clockwise, (self.x1, self.y1)),
+                    (self.clockwise, (self.x1, self.y1)),
                     (self.clockwise, (self.cx, self.cy)),
                     (self.clockwise, (self.x2, self.y2)),
-                    (not self.clockwise, (self.cx, self.cy)),
+                    (self.clockwise, (self.cx, self.cy)),
-                ], polarity_dark=self.polarity_dark)
+                ])
-
-    def is_zero_size(self):
-        return False # an arc with identical start and end points is defined as a circle
 
 
 @dataclass(frozen=True)
@@ -366,7 +323,7 @@ class Rectangle(GraphicPrimitive):
             (x - (cw+sh), y + (ch+sw)),
             (x + (cw+sh), y + (ch+sw)),
             (x + (cw+sh), y - (ch+sw)),
-            ], polarity_dark=self.polarity_dark)
+            ])
 
     def to_svg(self, fg='black', bg='white', tag=Tag):
         color = fg if self.polarity_dark else bg
@@ -374,6 +331,3 @@ class Rectangle(GraphicPrimitive):
         return tag('rect', x=prec(x), y=prec(y), width=prec(self.w), height=prec(self.h),
                 **svg_rotation(self.rotation, self.x, self.y), fill=color)
 
-    def is_zero_size(self):
-        return math.isclose(self.w, 0) or math.isclose(self.h, 0)
-

gerbonara/layer_rules.py

@@ -82,7 +82,6 @@ MATCH_RULES = {
     'bottom paste':     r'.*_boardoutline\.\w+', # FIXME verify this
     'drill plated':     r'.*\.(drl)', # diptrace has unplated drills on the outline layer
     'other netlist':    r'.*\.ipc', # default rule due to lack of tool-specific examples
-    'header regex':     [['sufficient', r'top .*|bottom .*', r'G04 DipTrace [.-0-9a-z]*\*']],
     },
 
 'target': {
@@ -152,25 +151,22 @@ MATCH_RULES = {
 
 'allegro': {
     # Allegro doesn't have any widespread convention, so we rely heavily on the layer name auto-guesser here.
-    'drill plated':     r'.*\.(drl)',
+    'drill mech': r'.*\.(drl|rou)',
-    'drill nonplated':  r'.*\.(rou)',
+    'generic gerber': r'.*\.art',
-    'other unknown':    r'.*(place|assembly|keep.?in|keep.?out).*\.art',
-    'autoguess':        r'.*\.art',
     'excellon params':  r'nc_param\.txt|ncdrill\.log|ncroute\.log',
     'other netlist':    r'.*\.ipc', # default rule due to lack of tool-specific examples
-    'header regex':     [['required,sufficient', r'.*\.art', r'G04 File Origin:\s+Cadence Allegro [0-9]+\.[0-9]+[-a-zA-Z0-9]*']],
     },
 
 'pads': {
     # Pads also does not seem to have a factory-default naming schema. Or it has one but everyone ignores it.
-    'autoguess':        r'.*\.pho',
+    'generic gerber':   r'.*\.pho',
-    'drill plated':     r'.*\.drl',
+    'drill mech':       r'.*\.drl',
     },
 
 'zuken': {
-    'autoguess': r'.*\.fph',
+    'generic gerber': r'.*\.fph',
     'gerber params': r'.*\.fpl',
-    'drill unknown': r'.*\.fdr',
+    'drill mech': r'.*\.fdr',
     'excellon params': r'.*\.fdl',
     'other netlist': r'.*\.ipc',
     'ipc-2581': r'.*\.xml',

gerbonara/layers.py

@@ -39,7 +39,6 @@ from .cam import FileSettings, LazyCamFile
 from .layer_rules import MATCH_RULES
 from .utils import sum_bounds, setup_svg, MM, Tag, convex_hull
 from . import graphic_objects as go
-from . import apertures as ap
 from . import graphic_primitives as gp
 
 
@@ -66,27 +65,27 @@ DEFAULT_COLORS = {
 
 class NamingScheme:
     kicad = {
-    'top copper':           '{board_name}-F_Cu.gbr',
+    'top copper':           '{board_name}-F.Cu.gbr',
-    'top mask':             '{board_name}-F_Mask.gbr',
+    'top mask':             '{board_name}-F.Mask.gbr',
-    'top silk':             '{board_name}-F_SilkS.gbr',
+    'top silk':             '{board_name}-F.SilkS.gbr',
-    'top paste':            '{board_name}-F_Paste.gbr',
+    'top paste':            '{board_name}-F.Paste.gbr',
-    'bottom copper':        '{board_name}-B_Cu.gbr',
+    'bottom copper':        '{board_name}-B.Cu.gbr',
-    'bottom mask':          '{board_name}-B_Mask.gbr',
+    'bottom mask':          '{board_name}-B.Mask.gbr',
-    'bottom silk':          '{board_name}-B_SilkS.gbr',
+    'bottom silk':          '{board_name}-B.SilkS.gbr',
-    'bottom paste':         '{board_name}-B_Paste.gbr',
+    'bottom paste':         '{board_name}-B.Paste.gbr',
-    'inner copper':         '{board_name}-In{layer_number}_Cu.gbr',
+    'inner copper':         '{board_name}-In{layer_number}.Cu.gbr',
-    'mechanical outline':   '{board_name}-Edge_Cuts.gbr',
+    'mechanical outline':   '{board_name}-Edge.Cuts.gbr',
     'drill unknown':        '{board_name}.drl',
     'drill plated':         '{board_name}-PTH.drl',
     'drill nonplated':      '{board_name}-NPTH.drl',
-    'other comments':       '{board_name}-Cmts_User.gbr',
+    'other comments':       '{board_name}-Cmts.User.gbr',
-    'other drawings':       '{board_name}-Dwgs_User.gbr',
+    'other drawings':       '{board_name}-Dwgs.User.gbr',
-    'top fabrication':      '{board_name}-F_Fab.gbr',
+    'top fabrication':      '{board_name}-F.Fab.gbr',
-    'bottom fabrication':   '{board_name}-B_Fab.gbr',
+    'bottom fabrication':   '{board_name}-B.Fab.gbr',
-    'top adhesive':         '{board_name}-F_Adhes.gbr',
+    'top adhesive':         '{board_name}-F.Adhes.gbr',
-    'bottom adhesive':      '{board_name}-B_Adhes.gbr',
+    'bottom adhesive':      '{board_name}-B.Adhes.gbr',
-    'top courtyard':        '{board_name}-F_CrtYd.gbr',
+    'top courtyard':        '{board_name}-F.CrtYd.gbr',
-    'bottom courtyard':     '{board_name}-B_CrtYd.gbr',
+    'bottom courtyard':     '{board_name}-B.CrtYd.gbr',
     'other netlist':        '{board_name}.d356',
     }
 
@@ -113,61 +112,31 @@ class NamingScheme:
     }
 
 
-def apply_rules(filenames, rules):
-    certain = False
-    gen = {}
-    already_matched = set()
-    header_regex = rules.pop('header regex', [])
-    header_regex_matched = [False] * len(header_regex)
 
-    file_headers = {}
+def _match_files(filenames):
-    def get_header(path):
-        if path not in file_headers:
-            with open(path) as f:
-                file_headers[path] = f.read(16384)
-        return file_headers[path]
-
-    for layer, regex in rules.items():
-        for fn in filenames:
-            if fn in already_matched:
-                continue
-
-            target = None
-            if (m := re.fullmatch(regex, fn.name, re.IGNORECASE)):
-                if layer == 'inner copper':
-                    target = 'inner_' + ''.join(e or '' for e in m.groups()) + ' copper'
-                else:
-                    target = layer
-
-                gen[target] = gen.get(target, []) + [fn]
-                already_matched.add(fn)
-
-            for i, (match_type, layer_match, header_match) in enumerate(header_regex):
-                if re.fullmatch(layer_match, fn.name, re.IGNORECASE) or (
-                        target is not None and re.fullmatch(layer_match, target, re.IGNORECASE)):
-                    if re.search(header_match, get_header(fn)):
-
-                        if 'sufficient' in match_type:
-                            certain = True
-
-                        header_regex_matched[i] = True
-
-    if any('required' in match_type and not match
-           for match, (match_type, *_) in zip(header_regex_matched, header_regex)):
-        return False, {}
-
-    return certain, gen
-
-def _best_match(filenames):
     matches = {}
     for generator, rules in MATCH_RULES.items():
-        certain, candidate = apply_rules(filenames, rules)
+        already_matched = set()
+        gen = {}
+        matches[generator] = gen
+        for layer, regex in rules.items():
+            for fn in filenames:
+                if fn in already_matched:
+                    continue
 
-        if certain:
+                if (m := re.fullmatch(regex, fn.name, re.IGNORECASE)):
-            return generator, candidate
+                    if layer == 'inner copper':
+                        target = 'inner_' + ''.join(e or '' for e in m.groups()) + ' copper'
+                    else:
+                        target = layer
 
-        matches[generator] = candidate
+                    gen[target] = gen.get(target, []) + [fn]
+                    already_matched.add(fn)
+    return matches
 
+
+def _best_match(filenames):
+    matches = _match_files(filenames)
     matches = sorted(matches.items(), key=lambda pair: len(pair[1]))
     generator, files = matches[-1]
     return generator, files
@@ -274,7 +243,7 @@ def _layername_autoguesser(fn):
     elif re.search('film', fn):
         use = 'copper'
 
-    elif re.search('out(line)?|board.?geom(etry)?', fn):
+    elif re.search('out(line)?', fn):
         use = 'outline'
         side = 'mechanical'
 
@@ -304,9 +273,6 @@ def _sort_layername(val):
     assert side.startswith('inner_')
     return int(side[len('inner_'):])
 
-def convex_hull_to_lines(points, unit=MM):
-    for (x1, y1), (x2, y2) in zip(points, points[1:] + points):
-        yield go.Line(x1, y1, x2, y2, aperture=ap.CircleAperture(unit(0.1, MM), unit=unit), unit=unit)
 
 class LayerStack:
     """ :py:class:`LayerStack` represents a set of Gerber files that describe different layers of the same board.
@@ -419,7 +385,7 @@ class LayerStack:
         with ZipFile(file) as f:
             f.extractall(path=tmp_indir)
 
-        inst = kls.open_dir(tmp_indir, board_name=board_name, lazy=lazy, overrides=overrides, autoguess=autoguess)
+        inst = kls.open_dir(tmp_indir, board_name=board_name, lazy=lazy)
         inst.tmpdir = tmpdir
         inst.original_path = Path(original_path or file)
         inst.was_zipped = True
@@ -455,7 +421,6 @@ class LayerStack:
                            given value.
         :rtype: :py:class:`LayerStack`
         """
-        print_layermap = False
 
         if autoguess:
             generator, filemap = _best_match(files)
@@ -480,51 +445,14 @@ class LayerStack:
                                 filemap[layer].remove(fn)
                             filemap[layer] = filemap.get(layer, []) + [fn]
 
-        if 'autoguess' in filemap:
-            warnings.warn(f'This generator ({generator}) often exports ambiguous filenames. Falling back to autoguesser for some files. Use at your own peril. Autoguessed files: {", ".join(f.name for f in filemap["autoguess"])}')
-            print_layermap = True
-            autoguess_filenames = filemap.pop('autoguess')
-
-            matched = set()
-            for key, values in _do_autoguess(autoguess_filenames).items():
-                filemap[key] = filemap.get(key, []) + values
-                matched |= set(values)
-
-            if generator == 'allegro':
-                # Allegro gerbers often contain the inner layers with completely random filenames and no indication of
-                # layer ordering except for drawings in the mechanical files. We fall back to alphabetic ordering.
-                for fn in autoguess_filenames:
-                    if fn not in matched:
-                        with open(fn) as f:
-                            header = f.read(16384)
-                            if re.search(r'G04 Layer:\s*ETCH/.*\*', header):
-                                filemap['unknown copper'] = filemap.get('unknown copper', []) + [fn]
-
-                if (unk := filemap.pop('unknown copper', None)):
-                    unk = sorted(unk, key=str)
-                    if 'top copper' not in filemap:
-                        filemap['top copper'], *unk = [unk]
-                    if 'bottom copper' not in filemap:
-                        *unk, filemap['bottom copper'] = [unk]
-
-                    i = 1
-                    while unk and i < 128:
-                        key = f'inner_{i:02d} copper'
-                        if key not in filemap:
-                            filemap[key] = [unk.pop(0)]
-                        i += 1
-
         if sum(len(files) for files in filemap.values()) < 6 and autoguess:
             warnings.warn('Ambiguous gerber filenames. Trying last-resort autoguesser.')
             generator = None
-            print_layermap = True
             filemap = _do_autoguess(files)
             if len(filemap) < 6:
                 raise ValueError('Cannot figure out gerber file mapping. Partial map is: ', filemap)
 
         excellon_settings, external_tools = None, None
-        automatch_drill_scale = False
-
         if generator == 'geda':
             # geda is written by geniuses who waste no bytes of unnecessary output so it doesn't actually include the
             # number format in files that use imperial units. Unfortunately it also doesn't include any hints that the
@@ -542,22 +470,16 @@ class LayerStack:
                     if (external_tools := parse_allegro_logfile(file.read_text())):
                         break
                 del filemap['excellon params']
-            else:
+            # Ignore if we can't find the param file -- maybe the user has convinced Allegro to actually put this
-                # Ignore if we can't find the param file -- maybe the user has convinced Allegro to actually put this
+            # information into a comment, or maybe they have made Allegro just use decimal points like XNC does.
-                # information into a comment, or maybe they have made Allegro just use decimal points like XNC does.
-                # We'll run an automatic scale matching later.
-                excellon_settings = FileSettings(number_format=(2, 4))
-                automatch_drill_scale = True
-
-            print('remaining filemap')
-            import pprint
-            pprint.pprint(filemap)
 
+            filemap = _do_autoguess([ f for files in filemap.values() for f in files ])
             if len(filemap) < 6:
                 raise SystemError('Cannot figure out gerber file mapping')
             # FIXME use layer metadata from comments and ipc file if available
 
         elif generator == 'zuken':
+            filemap = _do_autoguess([ f for files in filemap.values() for f in files ])
             if len(filemap) < 6:
                 raise SystemError('Cannot figure out gerber file mapping')
             # FIXME use layer metadata from comments and ipc file if available
@@ -581,12 +503,7 @@ class LayerStack:
         else:
             excellon_settings = None
 
-        ambiguous = [ f'{key} ({", ".join(x.name for x in value)})'
+        ambiguous = [ f'{key} ({", ".join(x.name for x in value)})' for key, value in filemap.items() if len(value) > 1 and not 'drill' in key ]
-                     for key, value in filemap.items()
-                     if len(value) > 1 and\
-                             not 'drill' in key and\
-                             not 'excellon' in key and\
-                             not key == 'other unknown']
         if ambiguous:
             raise SystemError(f'Ambiguous layer names: {", ".join(ambiguous)}')
 
@@ -595,11 +512,8 @@ class LayerStack:
         netlist = None
         layers = {} # { tuple(key.split()): None for key in STANDARD_LAYERS }
         for key, paths in filemap.items():
-            if len(paths) > 1 and\
+            if len(paths) > 1 and not 'drill' in key:
-                    not 'drill' in key and\
+                raise ValueError(f'Multiple matching files found for {key} layer: {", ".join(value)}')
-                    not 'excellon' in key and\
-                    not key == 'other unknown':
-                raise ValueError(f'Multiple matching files found for {key} layer: {", ".join(map(str, value))}')
 
             for path in paths:
                 id_result = identify_file(path.read_text())
@@ -660,72 +574,9 @@ class LayerStack:
             board_name = re.sub(r'^\W+', '', board_name)
             board_name = re.sub(r'\W+$', '', board_name)
 
-        if automatch_drill_scale:
+        return kls(layers, drill_pth, drill_npth, drill_layers, board_name=board_name,
-            top_copper = layers[('top', 'copper')].to_excellon(errors='ignore', holes_only=True)
-
-            # precision is matching precision in mm
-            def map_coords(obj, precision=0.01, scale=1):
-                obj = obj.converted(MM)
-                return round(obj.x*scale/precision), round(obj.y*scale/precision)
-
-            aper_coords = {map_coords(obj) for obj in top_copper.drills()}
-
-            for drill_file in [drill_pth, drill_npth, *drill_layers]:
-                if not drill_file or not drill_pth.import_settings._file_has_fixed_width_coordinates:
-                    continue
-
-                scale_matches = {}
-                for exp in range(-6, 6):
-                    scale = 10**exp
-                    hole_coords = {map_coords(obj, scale=scale) for obj in drill_file.drills()}
-
-                    scale_matches[scale] = len(aper_coords - hole_coords), len(hole_coords - aper_coords)
-                scales_out = [(max(a, b), scale) for scale, (a, b) in scale_matches.items()]
-                _matches, scale = sorted(scales_out)[0]
-                warnings.warn(f'Performing automatic alignment of poorly exported drill layer. Scale matching results: {scale_matches}. Chosen scale: {scale}')
-
-                # Note: This is only used with allegro files, which use decimal points and explicit units in their tool
-                # definitions. Thus, we only scale object coordinates, and not apertures.
-                for obj in drill_file.objects:
-                    obj.scale(scale)
-
-        stack = kls(layers, drill_pth, drill_npth, drill_layers, board_name=board_name,
                 original_path=original_path, was_zipped=was_zipped, generator=[*all_generator_hints, None][0])
 
-        if print_layermap:
-            warnings.warn('Auto-guessed layer map:\n' + stack.format_layer_map())
-        return stack
-
-    def format_layer_map(self):
-        lines = []
-        def print_layer(prefix, file):
-            nonlocal lines
-            if file is None:
-                lines.append(f'{prefix} <not found>')
-            else:
-                lines.append(f'{prefix} {file.original_path.name} {file}')
-
-        lines.append('  Drill files:')
-        print_layer('    Plated holes:', self.drill_pth)
-        print_layer('    Nonplated holes:', self.drill_npth)
-        for i, l in enumerate(self._drill_layers):
-            print_layer(f'    Additional drill layer {i}:', l)
-
-        print_layer('    Board outline:', self.get('mechanical outline'))
-
-        lines.append('  Soldermask:')
-        print_layer('    Top:', self.get('top mask'))
-        print_layer('    Bottom:', self.get('bottom mask'))
-
-        lines.append('  Silkscreen:')
-        print_layer('    Top:', self.get('top silk'))
-        print_layer('    Bottom:', self.get('bottom silk'))
-
-        lines.append('  Copper:')
-        for (side, _use), layer in self.copper_layers:
-            print_layer(f'    {side}:', layer)
-        return '\n'.join(lines)
-
     def save_to_zipfile(self, path, prefix='', overwrite_existing=True, board_name=None, naming_scheme={},
                           gerber_settings=None, excellon_settings=None):
         """ Save this board into a zip file at the given path. For other options, see
@@ -738,7 +589,10 @@ class LayerStack:
 
         :param prefix: Store output files under the given prefix inside the zip file
         """
-        if path.is_file() and not overwrite_existing:
+        if path.is_file():
+            if overwrite_existing:
+                path.unlink()
+            else:
                 raise ValueError('output zip file already exists and overwrite_existing is False')
 
         if gerber_settings and not excellon_settings:
@@ -1012,7 +866,7 @@ class LayerStack:
             if use == 'mask':
                 objects.insert(0, tag('path', id='outline-path', d=self.outline_svg_d(unit=svg_unit), fill='white'))
             layers.append(tag('g', objects, id=f'l-{side}-{use}', filter=f'url(#f-{use})',
-                              fill=default_fill, stroke=default_stroke, **stroke_attrs, fill_rule='evenodd',
+                              fill=default_fill, stroke=default_stroke, **stroke_attrs,
                               **inkscape_attrs(f'{side} {use}'), transform=layer_transform))
 
         for i, layer in enumerate(self.drill_layers):
@@ -1025,7 +879,7 @@ class LayerStack:
                 id=f'l-mechanical-outline', **stroke_attrs, **inkscape_attrs(f'outline'),
                 transform=layer_transform))
 
-        sc_y, tl_y = 1, 0
+        sc_y, tl_y = -1, (bounds[0][1] + bounds[1][1])
         if side == 'bottom':
             sc_x, tl_x = -1, (bounds[0][0] + bounds[1][0])
         else:
@@ -1260,6 +1114,22 @@ class LayerStack:
             polys.append(' '.join(poly.path_d()) + ' Z')
         return ' '.join(polys)
 
+    def outline_convex_hull(self, tol=0.01, unit=MM):
+        points = []
+        for obj in self.outline.instance.objects:
+            if isinstance(obj, go.Line):
+                line = obj.as_primitive(unit)
+                points.append((line.x1, line.y1))
+                points.append((line.x2, line.y2))
+
+            elif isinstance(obj, go.Arc):
+                for obj in obj.approximate(tol, unit):
+                    line = obj.as_primitive(unit)
+                    points.append((line.x1, line.y1))
+                    points.append((line.x2, line.y2))
+
+        return convex_hull(points)
+        
     def outline_polygons(self, tol=0.01, unit=MM):
         """ Iterator yielding this boards outline as a list of ordered :py:class:`~.graphic_objects.Arc` and
         :py:class:`~.graphic_objects.Line` objects. This method first sorts all lines and arcs on the outline layer into
@@ -1274,17 +1144,8 @@ class LayerStack:
         :param tol: :py:obj:`float` setting the tolerance below which two points are considered equal
         :param unit: :py:class:`.LengthUnit` or str (``'mm'`` or ``'inch'``). SVG document unit. Default: mm
         """
-
-        if not self.outline:
-            warnings.warn("Board has no outline layer, or the outline layer could not be identified by file name. Using the copper layers' convex hull instead.")
-            points = sum((layer.instance.convex_hull(tol, unit) for (_side, _use), layer in self.copper_layers), start=[])
-            yield list(convex_hull_to_lines(convex_hull(points), unit))
-            return
-
-        maybe_allegro_hint = '' if self.generator != 'allegro' else ' This file looks like it was generated by Allegro/OrCAD. These tools produce quite mal-formed gerbers, and often export text on the outline layer. If you generated this file yourself, maybe try twiddling with the export settings.'
         polygons = []
         lines = [ obj.as_primitive(unit) for obj in self.outline.instance.objects if isinstance(obj, (go.Line, go.Arc)) ]
-        lines = [ prim for prim in lines if not prim.is_zero_size() ]
 
         by_x = sorted([ (obj.x1, obj) for obj in lines ] + [ (obj.x2, obj) for obj in lines ], key=lambda x: x[0])
         dist_sq = lambda x1, y1, x2, y2: (x2-x1)**2 + (y2-y1)**2
@@ -1311,14 +1172,13 @@ class LayerStack:
                 j = 0 if d1 < d2 else 1
 
                 if (nearest, j) in joins and joins[(nearest, j)] != (cur, i):
-                    warnings.warn(f'Three-way intersection on outline layer at: {(nearest, j)}; {(cur, i)}; and {joins[(nearest, j)]}. Falling back to returning the convex hull of the outline layer.{maybe_allegro_hint}')
+                    warnings.warn(f'Three-way intersection on outline layer at: {(nearest, j)}; {(cur, i)}; and {joins[(nearest, j)]}. Falling back to returning the convex hull of the outline layer.')
-                    yield list(convex_hull_to_lines(self.outline.instance.convex_hull(tol, unit), unit))
+                    return self.outline_convex_hull(tol, unit)
-                    return
 
                 if (cur, i) in joins and joins[(cur, i)] != (nearest, j):
-                    warnings.warn(f'Three-way intersection on outline layer at: {(nearest, j)}; {(cur, i)}; and {joins[(cur, i)]}. Falling back to returning the convex hull of the outline layer.{maybe_allegro_hint}')
+                    warnings.warn(f'three-way intersection on outline layer at: {(nearest, j)}; {(cur, i)}; and {joins[(nearest, j)]}. Falling back to returning the convex hull of the outline layer.')
-                    yield list(convex_hull_to_lines(self.outline.instance.convex_hull(tol, unit), unit))
+                    return self.outline_convex_hull(tol, unit)
-                    return
+
 
                 joins[(cur, i)] = (nearest, j)
                 joins[(nearest, j)] = (cur, i)

gerbonara/rs274x.py

@@ -21,7 +21,6 @@
 
 import re
 import math
-import copy
 import warnings
 from pathlib import Path
 import dataclasses
@@ -152,7 +151,7 @@ class GerberFile(CamFile):
 
         self.map_apertures(lookup)
 
-    def to_excellon(self, plated=None, errors='raise', holes_only=False):
+    def to_excellon(self, plated=None, errors='raise'):
         """ Convert this excellon file into a :py:class:`~.excellon.ExcellonFile`. This will convert interpolated lines
         into slots, and circular aperture flashes into holes. Other features such as ``G36`` polygons or flashes with
         non-circular apertures will result in a :py:obj:`ValueError`. You can, of course, programmatically remove such
@@ -160,10 +159,7 @@ class GerberFile(CamFile):
         new_objs = []
         new_tools = {}
         for obj in self.objects:
-            if holes_only and not isinstance(obj, go.Flash):
+            if not (isinstance(obj, go.Line) or isinstance(obj, go.Arc) or isinstance(obj, go.Flash)) or \
-                continue
-
-            if not isinstance(obj, (go.Line, go.Arc, go.Flash)) or \
                 not isinstance(getattr(obj, 'aperture', None), apertures.CircleAperture):
                     if errors == 'raise':
                         raise ValueError(f'Cannot convert {obj} to excellon.')
@@ -375,8 +371,8 @@ class GerberFile(CamFile):
     def invert_polarity(self):
         """ Invert the polarity (color) of each object in this file. """
         for obj in self.objects:
-            obj.polarity_dark = not obj.polarity_dark
+            obj.polarity_dark = not p.polarity_dark
-
+    
 
 class GraphicsState:
     """ Internal class used to track Gerber processing state during import and export.
@@ -463,7 +459,7 @@ class GraphicsState:
         obj = go.Flash(*self.map_coord(*self.point), self.aperture,
                 polarity_dark=self._polarity_dark,
                 unit=self.unit,
-                attrs=copy.copy(self.object_attrs))
+                attrs=self.object_attrs)
         return obj
 
     def interpolate(self, x, y, i=None, j=None, aperture=True, multi_quadrant=False):
@@ -489,13 +485,13 @@ class GraphicsState:
                 raise SyntaxError("i/j coordinates given for linear D01 operation (which doesn't take i/j)")
 
             return go.Line(*old_point, *self.map_coord(*self.point), aperture,
-                    polarity_dark=self._polarity_dark, unit=unit, attrs=copy.copy(self.object_attrs))
+                    polarity_dark=self._polarity_dark, unit=unit, attrs=self.object_attrs)
 
         else:
             if i is None and j is None:
                 self.warn('Linear segment implied during arc interpolation mode through D01 w/o I, J values')
                 return go.Line(*old_point, *self.map_coord(*self.point), aperture,
-                        polarity_dark=self._polarity_dark, unit=unit, attrs=copy.copy(self.object_attrs))
+                        polarity_dark=self._polarity_dark, unit=unit, attrs=self.object_attrs)
 
             else:
                 if i is None:
@@ -512,7 +508,7 @@ class GraphicsState:
                 if not multi_quadrant:
                     return go.Arc(*old_point, *new_point, *self.map_coord(i, j, relative=True),
                             clockwise=clockwise, aperture=(self.aperture if aperture else None),
-                            polarity_dark=self._polarity_dark, unit=unit, attrs=copy.copy(self.object_attrs))
+                            polarity_dark=self._polarity_dark, unit=unit, attrs=self.object_attrs)
 
                 else:
                     if math.isclose(old_point[0], new_point[0]) and math.isclose(old_point[1], new_point[1]):
@@ -525,7 +521,7 @@ class GraphicsState:
 
                     arc = lambda cx, cy: go.Arc(*old_point, *new_point, cx, cy,
                             clockwise=clockwise, aperture=aperture,
-                            polarity_dark=self._polarity_dark, unit=unit, attrs=copy.copy(self.object_attrs))
+                            polarity_dark=self._polarity_dark, unit=unit, attrs=self.object_attrs)
                     arcs = [ arc(cx, cy), arc(-cx, cy), arc(cx, -cy), arc(-cx, -cy) ]
                     arcs = sorted(arcs, key=lambda a: a.numeric_error())
 
@@ -599,8 +595,6 @@ class GerberParser:
     NUMBER = r"[\+-]?\d+"
     DECIMAL = r"[\+-]?\d+([.]?\d+)?"
     NAME = r"[a-zA-Z_$\.][a-zA-Z_$\.0-9+\-]+"
-    MAX_STEP_REPEAT_INSTANCES = 100000
-    MAX_STEP_REPEAT_RESULT_OBJECTS = 100000
 
     STATEMENT_REGEXES = {
         'coord': fr"(G0?[123]|G74|G75|G54|G55)?\s*(?:X\+?(-?)({NUMBER}))?(?:Y\+?(-?)({NUMBER}))?" \
@@ -629,7 +623,6 @@ class GerberParser:
         'aperture_definition': fr"ADD(?P<number>\d+)(?P<shape>C|R|O|P|{NAME})(,(?P<modifiers>[^,%]*))?$",
         'aperture_macro': fr"AM(?P<name>{NAME})\*(?P<macro>[^%]*)",
         'siemens_garbage': r'^ICAS$',
-        'step_repeat': fr'^SR(?P<coords>X(?P<X>[0-9]+)Y(?P<Y>[0-9]+)I(?P<I>{DECIMAL})J(?P<J>{DECIMAL}))?$',
         'old_unit':r'(?P<mode>G7[01])',
         'old_notation': r'(?P<mode>G9[01])',
         'ignored': r"(?P<stmt>M01)",
@@ -649,8 +642,6 @@ class GerberParser:
         self.aperture_map = {}
         self.aperture_macros = {}
         self.current_region = None
-        self.step_repeat_coords = None
-        self.step_repeat_objects = None
         self.eof_found = False
         self.multi_quadrant_mode = None # used only for syntax checking
         self.macros = {}
@@ -793,10 +784,7 @@ class GerberParser:
                 # in multi-quadrant mode this may return None if start and end point of the arc are the same.
                 obj = self.graphics_state.interpolate(x, y, i, j, multi_quadrant=self.multi_quadrant_mode)
                 if obj is not None:
-                    if self.step_repeat_objects:
+                    self.target.objects.append(obj)
-                        self.step_repeat_objects.append(obj)
-                    else:
-                        self.target.objects.append(obj)
             else:
                 obj = self.graphics_state.interpolate(x, y, i, j, aperture=False, multi_quadrant=self.multi_quadrant_mode)
                 if obj is not None:
@@ -807,21 +795,14 @@ class GerberParser:
             if self.current_region:
                 # Start a new region for every outline. As gerber has no concept of fill rules or winding numbers,
                 # it does not make a graphical difference, and it makes the implementation slightly easier.
-                if self.step_repeat_objects:
+                self.target.objects.append(self.current_region)
-                    self.step_repeat_objects.append(self.current_region)
-                else:
-                    self.target.objects.append(self.current_region)
                 self.current_region = go.Region(
                         polarity_dark=self.graphics_state.polarity_dark,
                         unit=self.file_settings.unit)
 
         elif op == '3':
             if self.current_region is None:
-                obj = self.graphics_state.flash(x, y) 
+                self.target.objects.append(self.graphics_state.flash(x, y))
-                if self.step_repeat_objects:
-                    self.step_repeat_objects.append(obj)
-                else:
-                    self.target.objects.append(obj)
             else:
                 raise SyntaxError('DO3 flash statement inside region')
 
@@ -862,11 +843,6 @@ class GerberParser:
             if match['shape'] in 'RO' and (math.isclose(modifiers[0], 0) or math.isclose(modifiers[1], 0)):
                 self.warn('Definition of zero-width and/or zero-height rectangle or obround aperture. This is invalid according to spec.' )
 
-            # Polygon aperture rotation is specified in degrees, but radians are easier to work with
-            if match['shape'] == 'P':
-                if len(modifiers) > 2:
-                    modifiers[2] = math.radians(modifiers[2])
-
             new_aperture = kls(*modifiers, unit=self.file_settings.unit, attrs=tuple(self.aperture_attrs.items()),
                     original_number=number)
 
@@ -1083,40 +1059,11 @@ class GerberParser:
 
         else:
             target = {'TF': self.file_attrs, 'TO': self.graphics_state.object_attrs, 'TA': self.aperture_attrs}[match['type']]
-            target[match['name']] = tuple(match['value'].split(',')) if match['value'] else ()
+            target[match['name']] = tuple(match['value'].split(','))
 
             if 'EAGLE' in self.file_attrs.get('.GenerationSoftware', []) or match['eagle_garbage']:
                 self.generator_hints.append('eagle')
     
-    def _parse_step_repeat(self, match):
-        if match['coords']:
-            if self.step_repeat_coords:
-                raise SyntaxError('SR step-repeat called inside ongoing SR step-repeat')
-
-            x, y = int(match['X']), int(match['Y'])
-            i, j = float(match['I']), float(match['J'])
-            if x < 1 or y < 1:
-                raise SyntaxError('SR step-repeat X and Y values must be at least 1')
-            if x * y > self.MAX_STEP_REPEAT_INSTANCES:
-                raise SyntaxError('SR step-repeat expands to too many instances')
-
-            self.step_repeat_coords = (x, y, i, j)
-            self.step_repeat_objects = []
-
-        else:
-            x, y, i, j = self.step_repeat_coords
-            if len(self.step_repeat_objects) * x * y > self.MAX_STEP_REPEAT_RESULT_OBJECTS:
-                raise SyntaxError('SR step-repeat expands to too many objects')
-
-            for obj in self.step_repeat_objects:
-                for nx in range(x):
-                    for ny in range(y):
-                        new_obj = copy.copy(obj)
-                        new_obj.offset(i * nx, j * ny)
-                        self.target.objects.append(new_obj)
-            self.step_repeat_coords = None
-            self.step_repeat_objects = None
-
     def _parse_eof(self, match):
         self.eof_found = True
 

gerbonara/tests/conftest.py

@@ -0,0 +1,64 @@
+
+import os
+from pathlib import Path
+from itertools import chain
+
+import pytest
+
+from .image_support import ImageDifference, run_cargo_cmd
+
+def pytest_assertrepr_compare(op, left, right):
+    if isinstance(left, ImageDifference) or isinstance(right, ImageDifference):
+        diff = left if isinstance(left, ImageDifference) else right
+        return [
+            f'Image difference assertion failed.',
+            f'    Calculated difference: {diff}',
+            f'    Histogram: {diff.histogram}', ]
+
+# store report in node object so tmp_gbr can determine if the test failed.
+@pytest.hookimpl(tryfirst=True, hookwrapper=True)
+def pytest_runtest_makereport(item, call):
+    outcome = yield
+    rep = outcome.get_result()
+    setattr(item, f'rep_{rep.when}', rep)
+
+fail_dir = Path('gerbonara_test_failures')
+def pytest_sessionstart(session):
+    if not hasattr(session.config, 'workerinput'): # on worker
+        return
+
+    # on coordinator
+    for f in chain(fail_dir.glob('*.gbr'), fail_dir.glob('*.png')):
+        f.unlink()
+
+    try:
+        run_cargo_cmd('resvg', '--help')
+    except FileNotFoundError:
+        pytest.exit('resvg binary not found, aborting test.', 2)
+
+def pytest_addoption(parser):
+    parser.addoption('--kicad-symbol-library', nargs='*', help='Run symbol library tests on given symbol libraries. May be given multiple times.')
+    parser.addoption('--kicad-footprint-files', nargs='*', help='Run footprint library tests on given footprint files. May be given multiple times.')
+
+def pytest_generate_tests(metafunc):
+    if 'kicad_library_file' in metafunc.fixturenames:
+        if not (library_files := metafunc.config.getoption('symbol_library', None)):
+            if (lib_dir := os.environ.get('KICAD_SYMBOLS')):
+                lib_dir = Path(lib_dir).expanduser()
+                if not lib_dir.is_dir():
+                    raise ValueError(f'Path "{lib_dir}" given by KICAD_SYMBOLS environment variable does not exist or is not a directory.')
+                library_files = list(lib_dir.glob('*.kicad_sym'))
+            else:
+                raise ValueError('Either --kicad-symbol-library command line parameter or KICAD_SYMBOLS environment variable must be given.')
+        metafunc.parametrize('kicad_library_file', library_files, ids=list(map(str, library_files)))
+
+    if 'kicad_mod_file' in metafunc.fixturenames:
+        if not (mod_files := metafunc.config.getoption('footprint_files', None)):
+            if (lib_dir := os.environ.get('KICAD_FOOTPRINTS')):
+                lib_dir = Path(lib_dir).expanduser()
+                if not lib_dir.is_dir():
+                    raise ValueError(f'Path "{lib_dir}" given by KICAD_FOOTPRINTS environment variable does not exist or is not a directory.')
+                mod_files = list(lib_dir.glob('*.pretty/*.kicad_mod'))
+            else:
+                raise ValueError('Either --kicad-footprint-files command line parameter or KICAD_FOOTPRINTS environment variable must be given.')
+        metafunc.parametrize('kicad_mod_file', mod_files, ids=list(map(str, mod_files)))

gerbonara/tests/image_support.py

@@ -0,0 +1,313 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+#
+# Copyright 2022 Jan Sebastian Götte <gerbonara@jaseg.de>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Based on https://github.com/tracespace/tracespace
+#
+
+import subprocess
+from pathlib import Path
+import tempfile
+import textwrap
+import os
+import stat
+from functools import total_ordering
+import shutil
+import bs4
+from contextlib import contextmanager
+import hashlib
+
+import numpy as np
+from PIL import Image
+
+cachedir = Path(__file__).parent / 'image_cache'
+cachedir.mkdir(exist_ok=True)
+
+@total_ordering
+class ImageDifference:
+    def __init__(self, value, histogram):
+        self.value = value
+        self.histogram = histogram
+
+    def __float__(self):
+        return float(self.value)
+
+    def __eq__(self, other):
+        return float(self) == float(other)
+
+    def __lt__(self, other):
+        return float(self) < float(other)
+
+    def __str__(self):
+        return str(float(self))
+
+@total_ordering
+class Histogram:
+    def __init__(self, value, size):
+        self.value, self.size = value, size
+
+    def __eq__(self, other):
+        other = np.array(other)
+        other[other == None] = self.value[other == None]
+        return (self.value == other).all()
+
+    def __lt__(self, other):
+        other = np.array(other)
+        other[other == None] = self.value[other == None]
+        return (self.value <= other).all()
+
+    def __getitem__(self, index):
+        return self.value[index]
+
+    def __str__(self):
+        return f'{list(self.value)} size={self.size}'
+
+
+def run_cargo_cmd(cmd, args, **kwargs):
+    if cmd.upper() in os.environ:
+        return subprocess.run([os.environ[cmd.upper()], *args], **kwargs)
+
+    try:
+        return subprocess.run([cmd, *args], **kwargs)
+
+    except FileNotFoundError:
+        return subprocess.run([str(Path.home() / '.cargo' / 'bin' / cmd), *args], **kwargs)
+
+def svg_to_png(in_svg, out_png, dpi=100, bg=None):
+    params = f'{dpi}{bg}'.encode()
+    digest = hashlib.blake2b(Path(in_svg).read_bytes() + params).hexdigest()
+    cachefile = cachedir / f'{digest}.png'
+
+    if not cachefile.is_file():
+        bg = 'black' if bg is None else bg
+        run_cargo_cmd('resvg', ['--background', bg, '--dpi', str(dpi), in_svg, cachefile], check=True, stdout=subprocess.DEVNULL)
+
+    shutil.copy(cachefile, out_png)
+
+to_gerbv_svg_units = lambda val, unit='mm': val*72 if unit == 'inch' else val/25.4*72
+
+def gerbv_export(in_gbr, out_svg, export_format='svg', origin=(0, 0), size=(6, 6), fg='#ffffff', bg='#000000', override_unit_spec=None):
+    params = f'{origin}{size}{fg}{bg}'.encode()
+    digest = hashlib.blake2b(Path(in_gbr).read_bytes() + params).hexdigest()
+    cachefile = cachedir / f'{digest}.svg'
+
+    if not cachefile.is_file():
+        print(f'Building cache for {Path(in_gbr).name}')
+        # NOTE: gerbv seems to always export 'clear' polarity apertures as white, irrespective of --foreground, --background
+        # and project file color settings.
+        # TODO: File issue upstream.
+        with tempfile.NamedTemporaryFile('w') as f:
+            if override_unit_spec:
+                units, zeros, digits = override_unit_spec
+                print(f'{Path(in_gbr).name}: overriding excellon unit spec to {units=} {zeros=} {digits=}')
+                units = 0 if units == 'inch' else 1
+                zeros = {None: 0, 'leading': 1, 'trailing': 2}[zeros]
+                unit_spec = textwrap.dedent(f'''(cons 'attribs (list
+                        (list 'autodetect 'Boolean 0)
+                        (list 'zero_suppression 'Enum {zeros})
+                        (list 'units 'Enum {units})
+                        (list 'digits 'Integer {digits})
+                    ))''')
+            else:
+                unit_spec = ''
+
+            r, g, b = int(fg[1:3], 16), int(fg[3:5], 16), int(fg[5:], 16)
+            color = f"(cons 'color #({r*257} {g*257} {b*257}))"
+            f.write(f'''(gerbv-file-version! "2.0A")(define-layer! 0 (cons 'filename "{in_gbr}"){unit_spec}{color})''')
+            f.flush()
+            if override_unit_spec:
+                shutil.copy(f.name, '/tmp/foo.gbv')
+
+            x, y = origin
+            w, h = size
+            cmd = ['gerbv', '-x', export_format,
+                '--border=0',
+                f'--origin={x:.6f}x{y:.6f}', f'--window_inch={w:.6f}x{h:.6f}',
+                f'--background={bg}',
+                f'--foreground={fg}',
+                '-o', str(cachefile), '-p', f.name]
+            subprocess.run(cmd, check=True, stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
+    else:
+        print(f'Re-using cache for {Path(in_gbr).name}')
+    shutil.copy(cachefile, out_svg)
+
+def kicad_fp_export(mod_file, out_svg):
+    mod_file = Path(mod_file)
+    if mod_file.suffix.lower() != '.kicad_mod':
+        raise ValueError("KiCad footprint file must have .kicad_mod extension for kicad-cli to do it's thing")
+
+    params = f'(noparams)'.encode()
+    digest = hashlib.blake2b(mod_file.read_bytes() + params).hexdigest()
+    cachefile = cachedir / f'{digest}.svg'
+
+    if not cachefile.is_file():
+        print(f'Building cache for {mod_file.name}')
+
+        with tempfile.TemporaryDirectory() as tmpdir:
+            os.chmod(tmpdir, 0o1777)
+            pretty_dir = mod_file.parent
+            fp_name = mod_file.name[:-len('.kicad_mod')]
+            cmd = ['podman', 'run', '--mount', f'type=bind,src={pretty_dir},dst=/{pretty_dir.name}',
+                   '--mount', f'type=bind,src={tmpdir},dst=/out',
+                   'registry.hub.docker.com/kicad/kicad:nightly',
+                   'kicad-cli', 'fp', 'export', 'svg', '--output', '/out', '--footprint', fp_name, f'/{pretty_dir.name}']
+            subprocess.run(cmd, check=True) #, stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
+            out_file = Path(tmpdir) / f'{fp_name}.svg'
+            shutil.copy(out_file, cachefile)
+    else:
+        print(f'Re-using cache for {mod_file.name}')
+    shutil.copy(cachefile, out_svg)
+
+@contextmanager
+def svg_soup(filename):
+    with open(filename, 'r') as f:
+        soup = bs4.BeautifulSoup(f.read(), 'xml')
+
+    yield soup
+
+    with open(filename, 'w') as f:
+        f.write(str(soup))
+
+def cleanup_gerbv_svg(soup):
+    width = soup.svg["width"]
+    height = soup.svg["height"]
+    width = width[:-2] if width.endswith('pt') else width
+    height = height[:-2] if height.endswith('pt') else height
+    soup.svg['width'] = f'{float(width)/72*25.4:.4f}mm'
+    soup.svg['height'] = f'{float(height)/72*25.4:.4f}mm'
+    for group in soup.find_all('g'):
+        # gerbv uses Cairo's SVG canvas. Cairo's SVG canvas is kind of broken. It has no support for unit
+        # handling at all, which means the output files just end up being in pixels at 72 dpi. Further, it
+        # seems gerbv's aperture macro rendering interacts poorly with Cairo's SVG export. gerbv renders
+        # aperture macros into a new surface, which for some reason gets clipped by Cairo to the given
+        # canvas size. This is just wrong, so we just nuke the clip path from these SVG groups here.
+        #
+        # Apart from being graphically broken, this additionally causes very bad rendering performance.
+        del group['clip-path']
+
+def gerber_difference(reference, actual, diff_out=None, svg_transform=None, size=(10,10), ref_unit_spec=None):
+    with tempfile.NamedTemporaryFile(suffix='.svg') as act_svg,\
+        tempfile.NamedTemporaryFile(suffix='.svg') as ref_svg:
+
+        gerbv_export(reference, ref_svg.name, size=size, export_format='svg', override_unit_spec=ref_unit_spec)
+        gerbv_export(actual, act_svg.name, size=size, export_format='svg')
+
+        with svg_soup(ref_svg.name) as soup:
+            if svg_transform is not None:
+                svg = soup.svg
+                children = list(svg.children)
+                g = soup.new_tag('g', attrs={'transform': svg_transform})
+                for c in children:
+                    g.append(c.extract())
+                svg.append(g)
+
+            cleanup_gerbv_svg(soup)
+
+        with svg_soup(act_svg.name) as soup:
+            cleanup_gerbv_svg(soup)
+
+        return svg_difference(ref_svg.name, act_svg.name, diff_out=diff_out)
+
+def gerber_difference_merge(ref1, ref2, actual, diff_out=None, composite_out=None, svg_transform1=None, svg_transform2=None, size=(10,10)):
+    with tempfile.NamedTemporaryFile(suffix='.svg') as act_svg,\
+        tempfile.NamedTemporaryFile(suffix='.svg') as ref1_svg,\
+        tempfile.NamedTemporaryFile(suffix='.svg') as ref2_svg:
+
+        gerbv_export(ref1, ref1_svg.name, size=size, export_format='svg')
+        gerbv_export(ref2, ref2_svg.name, size=size, export_format='svg')
+        gerbv_export(actual, act_svg.name, size=size, export_format='svg')
+        for var in ['ref1_svg', 'ref2_svg', 'act_svg']:
+            print(f'=== {var} ===')
+            print(Path(locals()[var].name).read_text().splitlines()[1])
+
+        with svg_soup(ref1_svg.name) as soup1:
+            if svg_transform1 is not None:
+                svg = soup1.svg
+                children = list(svg.children)
+                g = soup1.new_tag('g', attrs={'transform': svg_transform1})
+                for c in children:
+                    g.append(c.extract())
+                svg.append(g)
+            cleanup_gerbv_svg(soup1)
+
+            with svg_soup(ref2_svg.name) as soup2:
+                if svg_transform2 is not None:
+                    svg = soup2.svg
+                    children = list(svg.children)
+                    g = soup2.new_tag('g', attrs={'transform': svg_transform2})
+                    for c in children:
+                        g.append(c.extract())
+                    svg.append(g)
+                cleanup_gerbv_svg(soup2)
+
+                defs1 = soup1.find('defs')
+                if not defs1:
+                    defs1 = soup1.new_tag('defs')
+                    soup1.find('svg').insert(0, defs1)
+
+                defs2 = soup2.find('defs')
+                if defs2:
+                    defs2 = defs2.extract()
+                    # explicitly convert .contents into list here and below because else bs4 stumbles over itself
+                    # iterating because we modify the tree in the loop body.
+                    for c in list(defs2.contents):
+                        if hasattr(c, 'attrs'):
+                            c['id'] = 'gn-merge-b-' + c.attrs.get('id', str(id(c)))
+                        defs1.append(c)
+
+                for use in soup2.find_all('use', recursive=True):
+                    if (href := use.get('xlink:href', '')).startswith('#'):
+                        use['xlink:href'] = f'#gn-merge-b-{href[1:]}'
+
+                svg1 = soup1.find('svg')
+                for c in list(soup2.find('svg').contents):
+                    if hasattr(c, 'attrs'):
+                        c['id'] = 'gn-merge-b-' + c.attrs.get('id', str(id(c)))
+                    svg1.append(c)
+
+        if composite_out:
+            shutil.copyfile(ref1_svg.name, composite_out)
+
+        with svg_soup(act_svg.name) as soup:
+            cleanup_gerbv_svg(soup)
+
+        return svg_difference(ref1_svg.name, act_svg.name, diff_out=diff_out)
+
+def svg_difference(reference, actual, diff_out=None, background=None, dpi=100):
+    with tempfile.NamedTemporaryFile(suffix='-ref.png') as ref_png,\
+        tempfile.NamedTemporaryFile(suffix='-act.png') as act_png:
+
+        svg_to_png(reference, ref_png.name, bg=background, dpi=dpi)
+        svg_to_png(actual, act_png.name, bg=background, dpi=dpi)
+
+        return image_difference(ref_png.name, act_png.name, diff_out=diff_out)
+
+def image_difference(reference, actual, diff_out=None):
+    ref = np.array(Image.open(reference)).astype(float)
+    out = np.array(Image.open(actual)).astype(float)
+
+    ref, out = ref.mean(axis=2), out.mean(axis=2) # convert to grayscale
+    # TODO blur images here before comparison to mitigate aliasing issue
+    delta = np.abs(out - ref).astype(float) / 255
+    if diff_out:
+        Image.fromarray((delta*255).astype(np.uint8), mode='L').save(diff_out)
+
+    hist, _bins = np.histogram(delta, bins=10, range=(0, 1))
+    return (ImageDifference(delta.mean(), hist),
+            ImageDifference(delta.max(), hist),
+            Histogram(hist, out.size))
+
+