jaseg/7seg
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
7seg/fw/main.c
jaseg 9eb92caa6c working commit
2017-08-15 14:34:34 +02:00

391 lines
12 KiB
C
Raw Blame History

#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wstrict-aliasing"
#include <stm32f0xx.h>
#include <stm32f0xx_ll_utils.h>
#include <stm32f0xx_ll_spi.h>
#pragma GCC diagnostic pop
#include <system_stm32f0xx.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
/*
* Part number: STM32F030F4C6
*/
/* Wait for about 0.2us */
static void tick(void) {
/* 1 */ /* 2 */ /* 3 */ /* 4 */ /* 5 */
/* 5 */ __asm__("nop"); __asm__("nop"); __asm__("nop"); __asm__("nop"); __asm__("nop");
/* 10 */ __asm__("nop"); __asm__("nop"); __asm__("nop"); __asm__("nop"); __asm__("nop");
}
void spi_send(int data) {
SPI1->DR = data;
while (SPI1->SR & SPI_SR_BSY);
}
void strobe_aux(void) {
GPIOA->BSRR = GPIO_BSRR_BS_10;
tick();
GPIOA->BSRR = GPIO_BSRR_BR_10;
}
void strobe_leds(void) {
GPIOA->BSRR = GPIO_BSRR_BS_9;
tick();
GPIOA->BSRR = GPIO_BSRR_BR_9;
}
static volatile unsigned int sys_time = 0;
enum Segment { SegA, SegB, SegC, SegD, SegE, SegF, SegG, SegDP, nsegments };
enum {
nrows = 4,
ncols = 8,
nbits = 10,
};
enum {
frame_size_words = nrows*ncols*nsegments/32,
};
struct framebuf {
/* Multiplexing order: first Digits, then Time/bits, last Segments */
union {
uint32_t data[nbits*frame_size_words];
struct {
struct {
uint32_t data[frame_size_words];
} frame[nbits];
};
};
uint8_t brightness; /* 0 or 1; controls global brighntess control */
};
volatile struct framebuf fb[2] = {0};
volatile struct framebuf *read_fb=fb+0, *write_fb=fb+1;
volatile int led_state = 0;
volatile enum { FB_WRITE, FB_FORMAT, FB_UPDATE } fb_op;
volatile uint8_t rx_buf[sizeof(struct framebuf)];
volatile uint8_t this_addr = 0x05; /* FIXME */
#define LED_COMM 0x0001
#define LED_ERROR 0x0002
#define LED_ID 0x0004
#define SR_ILED_HIGH 0x0080
#define SR_ILED_LOW 0x0040
void transpose_data(volatile uint8_t *rx_buf, volatile struct framebuf *out_fb) {
memset((uint8_t *)out_fb, 0, sizeof(*out_fb));
struct data_format {
union {
uint8_t high[8];
struct { uint8_t ah, bh, ch, dh, eh, fh, gh, dph; };
};
union {
uint16_t low;
struct { uint8_t dpl:2, gl:2, fl:2, el:2, dl:2, cl:2, bl:2, al:2; };
};
};
struct data_format *rxp = (struct data_format *)rx_buf;
for (int bit=0; bit<8; bit++) { /* bits */
uint32_t bit_mask = 1U<<bit;
volatile uint32_t *frame_data = out_fb->frame[bit+2].data;
uint8_t *start_inp = rxp->high;
for (volatile uint32_t *outp=frame_data; outp<frame_data+8; outp++) { /* segments */
uint32_t acc = 0;
uint8_t *inp = start_inp++;
for (int digit=0; digit<32; digit++) {
acc |= (*inp & bit_mask) >> bit << digit;
inp += sizeof(struct data_format);
}
*outp = acc;
}
}
for (int bit=0; bit<2; bit++) { /* bits */
volatile uint32_t *frame_data = out_fb->frame[bit].data;
uint16_t *inp = &rxp->low;
for (int seg=0; seg<8; seg++) { /* segments */
uint32_t mask = 1 << bit << seg;
uint32_t acc = 0;
for (int digit=0; digit<32; digit++) {
acc |= (*inp & mask) >> bit >> seg << digit;
inp += sizeof(struct data_format)/sizeof(uint16_t);
}
frame_data[seg] = acc;
}
}
}
void shift_aux(int global_current, int leds, int active_segment) {
spi_send(
(global_current ? SR_ILED_HIGH : SR_ILED_LOW)
| (leds<<1)
| (0xff00 ^ (0x100<<active_segment)));
strobe_aux();
}
static volatile int frame_duration;
/* returns new bit time in cycles */
int shift_data() {
static int active_segment = 0;
static unsigned int active_bit = 0;
static int last_frame_sys_time;
/* Note: On boot, multiplexing will start with bit 1 due to the next few lines. This is perfectly ok. */
active_bit++;
if (active_bit == nbits) {
active_bit = 0;
active_segment++;
if (active_segment == nsegments) {
active_segment = 0;
int time = sys_time;
frame_duration = time - last_frame_sys_time;
last_frame_sys_time = sys_time;
if (fb_op == FB_UPDATE) {
volatile struct framebuf *tmp = read_fb;
read_fb = write_fb;
write_fb = tmp;
fb_op = FB_WRITE;
}
}
shift_aux(read_fb->brightness, led_state, active_segment);
}
uint32_t current_word = read_fb->data[active_bit*frame_size_words + active_segment];
spi_send(current_word&0xffff);
spi_send(current_word>>16);
strobe_leds();
return 1<<active_bit;
}
void cfg_timer3() {
TIM3->CCMR1 = 6<<TIM_CCMR1_OC1M_Pos; /* PWM Mode 1 */
TIM3->CCER = TIM_CCER_CC1E | TIM_CCER_CC1P; /* Inverting output */
TIM3->DIER = TIM_DIER_CC1IE;
TIM3->CCR1 = 1000; /* Schedule first interrupt */
TIM3->PSC = SystemCoreClock/5000000 * 2; /* 0.40us/tick */
TIM3->ARR = 0xffff;
TIM3->EGR |= TIM_EGR_UG;
TIM3->CR1 = TIM_CR1_ARPE;
TIM3->CR1 |= TIM_CR1_CEN;
}
TIM_TypeDef *tim3 = TIM3;
void TIM3_IRQHandler() {
//TIM3->CR1 &= ~TIM_CR1_CEN_Msk; FIXME
/* This takes about 10us */
int period = 0; /* FIXME DEBUG shift_data(); */
TIM3->CCR1 = period;
TIM3->CNT = 0xffff; /* To not enable OC1 right away */
TIM3->SR &= ~TIM_SR_CC1IF_Msk;
//TIM3->CR1 |= TIM_CR1_CEN;
}
enum Command {
CMD_PING,
CMD_SET_ADDR,
CMD_SET_FB,
CMD_GET_DESC,
};
void USART1_IRQHandler() {
int addr = USART1->RDR;
int cmd = addr>>5;
addr &= 0x1F;
/* Are we addressed? */
if (addr != this_addr) {
/* We are not. Mute USART until next idle condition */
USART1->RQR |= USART_RQR_MMRQ;
} else {
/* We are. Switch by command. */
switch (cmd) {
case CMD_SET_FB:
/* Are we ready to process new frame data? */
if (fb_op != FB_WRITE)
goto errout; /* Error: Not yet ready to receive new packet */
/* Disable this RX interrupt for duration of DMA transfer */
USART1->CR1 &= ~USART_CR1_RXNEIE_Msk;
/* Enable DMA transfer to write buffer */
DMA1_Channel3->CCR |= DMA_CCR_EN;
/* Kick off formatting code in main loop outside interrupt context */
fb_op = FB_FORMAT;
break;
}
}
errout:
/* FIXME */
return;
}
void DMA1_Channel2_3_IRQHandler() {
/* DMA Transfer complete, re-enable receive interrupt */
USART1->CR1 |= USART_CR1_RXNEIE;
}
int main(void) {
RCC->CR |= RCC_CR_HSEON;
while (!(RCC->CR&RCC_CR_HSERDY));
RCC->CFGR &= ~RCC_CFGR_PLLMUL_Msk & ~RCC_CFGR_SW_Msk & ~RCC_CFGR_PPRE_Msk & ~RCC_CFGR_HPRE_Msk;
RCC->CFGR |= (1<<RCC_CFGR_PLLMUL_Pos) | RCC_CFGR_PLLSRC_HSE_PREDIV; /* PLL x4 -> 50.0MHz */
RCC->CFGR2 &= ~RCC_CFGR2_PREDIV_Msk;
RCC->CFGR2 |= RCC_CFGR2_PREDIV_DIV2; /* prediv :2 -> 12.5MHz */
RCC->CR |= RCC_CR_PLLON;
while (!(RCC->CR&RCC_CR_PLLRDY));
RCC->CFGR |= (2<<RCC_CFGR_SW_Pos);
SystemCoreClockUpdate();
SysTick_Config(SystemCoreClock/1000); /* 1ms interval */
NVIC_DisableIRQ(SysTick_IRQn);
while (42) {
static int tick __attribute__((used));
static int cvr __attribute__((used));
tick = sys_time;
cvr = SysTick->VAL;
//if (fb_op == FB_FORMAT) {
transpose_data(rx_buf, write_fb);
write_fb->brightness = rx_buf[offsetof(struct framebuf, brightness)];
// fb_op = FB_UPDATE;
// while (fb_op == FB_UPDATE)
// ;
//}
tick = sys_time - tick;
cvr = SysTick->VAL - cvr;
asm volatile ("bkpt");
}
//LL_Init1msTick(SystemCoreClock);
RCC->AHBENR |= RCC_AHBENR_GPIOAEN | RCC_AHBENR_DMAEN;
RCC->APB2ENR |= RCC_APB2ENR_SPI1EN | RCC_APB2ENR_USART1EN;
RCC->APB1ENR |= RCC_APB1ENR_TIM3EN;
GPIOA->MODER |=
(2<<GPIO_MODER_MODER1_Pos) /* PA1 - RS485 DE */
| (2<<GPIO_MODER_MODER2_Pos) /* PA2 - RS485 TX */
| (2<<GPIO_MODER_MODER3_Pos) /* PA3 - RS485 RX */
| (2<<GPIO_MODER_MODER5_Pos) /* PA5 - SCLK */
| (2<<GPIO_MODER_MODER6_Pos) /* PA6 - LED !OE */
| (2<<GPIO_MODER_MODER7_Pos) /* PA7 - MOSI */
| (1<<GPIO_MODER_MODER9_Pos) /* PA9 - LED strobe */
| (1<<GPIO_MODER_MODER10_Pos);/* PA10 - Auxiliary strobe */
/* Set shift register IO GPIO output speed */
GPIOA->OSPEEDR |=
(2<<GPIO_OSPEEDR_OSPEEDR1_Pos) /* RS485 DE */
| (2<<GPIO_OSPEEDR_OSPEEDR2_Pos) /* TX */
| (2<<GPIO_OSPEEDR_OSPEEDR3_Pos) /* RX */
| (2<<GPIO_OSPEEDR_OSPEEDR5_Pos) /* SCLK */
| (2<<GPIO_OSPEEDR_OSPEEDR6_Pos) /* LED !OE */
| (2<<GPIO_OSPEEDR_OSPEEDR7_Pos) /* MOSI */
| (2<<GPIO_OSPEEDR_OSPEEDR9_Pos) /* LED strobe */
| (2<<GPIO_OSPEEDR_OSPEEDR10_Pos); /* Auxiliary strobe */
GPIOA->AFR[0] |=
(1<<GPIO_AFRL_AFRL1_Pos) /* USART1_RTS (DE) */
| (1<<GPIO_AFRL_AFRL2_Pos) /* USART1_TX */
| (1<<GPIO_AFRL_AFRL3_Pos) /* USART1_RX */
| (0<<GPIO_AFRL_AFRL5_Pos) /* SPI1_SCK */
| (1<<GPIO_AFRL_AFRL6_Pos) /* TIM3_CH1 */
| (0<<GPIO_AFRL_AFRL7_Pos); /* SPI1_MOSI */
GPIOA->PUPDR |=
(2<<GPIO_PUPDR_PUPDR1_Pos) /* RS485 DE: Pulldown */
| (1<<GPIO_PUPDR_PUPDR2_Pos) /* TX */
| (1<<GPIO_PUPDR_PUPDR3_Pos); /* RX */
/* Configure SPI controller */
SPI1->I2SCFGR = 0;
SPI1->CR2 &= ~SPI_CR2_DS_Msk;
SPI1->CR2 &= ~SPI_CR2_DS_Msk;
SPI1->CR2 |= LL_SPI_DATAWIDTH_16BIT;
/* Configure USART1 */
USART1->CR1 = /* 8-bit -> M1, M0 clear */
/* RTOIE clear */
(8 << USART_CR1_DEAT_Pos) /* 8 sample cycles/1 bit DE assertion time */
| (8 << USART_CR1_DEDT_Pos) /* 8 sample cycles/1 bit DE assertion time */
| USART_CR1_OVER8
/* CMIF clear */
| USART_CR1_MME
/* WAKE clear */
/* PCE, PS clear */
| USART_CR1_RXNEIE
/* other interrupts clear */
| USART_CR1_TE
| USART_CR1_RE;
//USART1->CR2 = USART_CR2_RTOEN; /* Timeout enable */
USART1->CR3 = USART_CR3_DEM; /* RS485 DE enable (output on RTS) */
int usartdiv = 25;
USART1->BRR = (usartdiv&0xFFF0) | ((usartdiv>>1) & 0x7);
USART1->CR1 |= USART_CR1_UE;
/* Configure DMA for USART frame data reception */
USART1->CR3 |= USART_CR3_DMAR;
DMA1_Channel3->CPAR = (unsigned int)&USART1->RDR;
DMA1_Channel3->CMAR = (unsigned int)rx_buf;
DMA1_Channel3->CNDTR = sizeof(rx_buf);
DMA1_Channel3->CCR = (0<<DMA_CCR_PL_Pos);
DMA1_Channel3->CCR |=
(0<<DMA_CCR_MSIZE_Pos)
| (0<<DMA_CCR_PSIZE_Pos)
| DMA_CCR_MINC
| DMA_CCR_TCIE;
/* Baud rate PCLK/2 -> 25MHz */
SPI1->CR1 =
SPI_CR1_BIDIMODE
| SPI_CR1_BIDIOE
| SPI_CR1_SSM
| SPI_CR1_SSI
| SPI_CR1_SPE
| (0<<SPI_CR1_BR_Pos)
| SPI_CR1_MSTR
| SPI_CR1_CPOL
| SPI_CR1_CPHA;
/* FIXME maybe try w/o BIDI */
read_fb->brightness = 1;
for (int i=0; i<sizeof(read_fb->data)/sizeof(uint32_t); i++) {
read_fb->data[i] = 0xffffffff;
}
cfg_timer3();
NVIC_EnableIRQ(TIM3_IRQn);
NVIC_SetPriority(TIM3_IRQn, 2);
SysTick_Config(SystemCoreClock/1000); /* 1ms interval */
while (42) {
led_state = (sys_time>>8)&7;
}
}
void NMI_Handler(void) {
}
void HardFault_Handler(void) __attribute__((naked));
void HardFault_Handler() {
asm volatile ("bkpt");
}
void SVC_Handler(void) {
}
void PendSV_Handler(void) {
}
void SysTick_Handler(void) {
sys_time++;
}
Reference in a new issue View git blame Copy permalink