179 lines
9 KiB
TeX
179 lines
9 KiB
TeX
\documentclass[conference,compsoc]{IEEEtran}
|
|
|
|
\usepackage[T1]{fontenc}
|
|
\usepackage[
|
|
backend=biber,
|
|
style=numeric,
|
|
natbib=true,
|
|
url=false,
|
|
doi=true,
|
|
eprint=false
|
|
]{biblatex}
|
|
\addbibresource{paper.bib}
|
|
\usepackage{amssymb,amsmath}
|
|
\usepackage{eurosym}
|
|
\usepackage{wasysym}
|
|
|
|
\usepackage[binary-units]{siunitx}
|
|
\DeclareSIUnit{\baud}{Bd}
|
|
\DeclareSIUnit{\year}{a}
|
|
\usepackage{commath}
|
|
\usepackage{graphicx,color}
|
|
\usepackage{subcaption}
|
|
\usepackage{array}
|
|
\usepackage{censor}
|
|
\usepackage{hyperref}
|
|
\usepackage{makecell}
|
|
|
|
\renewcommand{\floatpagefraction}{.8}
|
|
\newcommand{\degree}{\ensuremath{^\circ}}
|
|
\newcolumntype{P}[1]{>{\centering\arraybackslash}p{#1}}
|
|
\newcommand{\partnum}[1]{\texttt{#1}}
|
|
|
|
\begin{document}
|
|
|
|
\date{}
|
|
\title{Wireless Power Transfer with a Twist:
|
|
Achieving Rotation-Invariant Coupling using Multi-Layer PCB Inductors}
|
|
\maketitle
|
|
|
|
\begin{abstract}
|
|
% FIXME
|
|
\end{abstract}
|
|
|
|
\section{Introduction}
|
|
|
|
Inductive wireless power transfer (WPT) is a widely used technology supported by a large corpus of research literature.
|
|
% FIXME cite
|
|
While working on a novel application of Inductive wireless power transfer in a Inertial Hardware Security Module (IHSM)
|
|
as proposed by Götte and Scheuermann, % FIXME cite
|
|
we found ourselves presented with an unusual set of constraints around inductive wireless power transfer through a
|
|
rotating joint using a PCB inductor that does not yet seem to be addressed adequately in the existing literature on
|
|
inductive wireless power transfer.
|
|
|
|
Our application poses the challenge of transferring power between a stationary and a rotating part. To reduce
|
|
manufacturing cost of both parts, and to reduce weight, and thereby inertia as well as susceptibility to vibration in
|
|
the rotating part, we decided to use inductors that are directly patterned onto the IHSM's printed circuit boards.
|
|
The primary constraint that results from this choice is a highly constrained turn count that is limited by the PCB
|
|
manufacturing processes' pattern resolution and by ohmic heating.
|
|
|
|
We found that the limited turn count of PCB inductors results in a \emph{slightly} asymmetric field, which means that
|
|
the coupling coefficient of two such inductors oscillates at one oscillation per revolution when the inductors are
|
|
rotated on-axis, even if both inductors are perfectly coaxially aligned.
|
|
|
|
In other inductive wireless power transfer systems, this oscillation is mitigated by one of several factors: First, for
|
|
this effect to matter in the first place, the two coils have to be rotating with respect to one another. In ferrite or
|
|
iron-cored inductors, the core shapes the magnetic field and evens out any such imperfection. In wire-wound inductors,
|
|
the (much) higher turn count and circular aspect ratio of the wires reduces this effect to almost nothing. Finally, the
|
|
output ripple caused by this oscillation can be filtered through a voltage regulator or by using a large decoupling
|
|
capacitor on the secondary side.
|
|
|
|
While there exist a number of prior works focusing on efficient power transfer between two coils whose position relative
|
|
to one another cannot be precisely controlled as is the case in wireless phone charging systems, it is generally assumed
|
|
that the two coils remain (almost) stationary with respect to one another throughout the charging process. % FIXME cite
|
|
|
|
There exists a small body of work on inductive power transfer through rotating joints, % FIXME cite
|
|
but here the focus lies on higher power budgets than our application requires, which often requires ferrite or iron-core
|
|
inductors.
|
|
|
|
Our application is unique in that it requires power transfer through a joint that is constantly rotating at high speed,
|
|
while we simultaneously want to avoid heavy components on the (rotating) receiver side. (Liquid) electrolytic capacitors
|
|
cannot be used due to the large centrifugal acceleration that the rotating part experiences, and other heavy components
|
|
such as large ceramic or polymer electrolytic capacitors or ferrite-core power inductors are inadvisable since they will
|
|
exert large stresses onto the assembly due to the same centrifugal acceleration, and any imbalance caused by tolerances
|
|
in the placement of heavy components will quickly cause a strong vibration.
|
|
|
|
\subsection{Twisted inductors}
|
|
|
|
Applying a principle inspired by rectangular or octagonal RFIC inductor design as well as by the polygonal basket-woven
|
|
air coils used in early radio set, we propose a novel way of laying out circular PCB inductors that twists the
|
|
inductor's windings around one another using a ring of vias each on the inside and outside of the inductor's windings.
|
|
Applying some math, we show that we can layout a twisted inductor for any number of twists that is co-prime to the
|
|
inductor's turn count.
|
|
|
|
We observe that in high-frequency applications, a moderate number of twists increases the spacing between the beginning
|
|
and end of the inductor's conductor, where the majority of the inductor's AC current flows. This decreases the parasitic
|
|
capacitance of the inductor and raises its self-resonant frequency, raising its maximum possible operating frequency and
|
|
improving its efficiency at lower operating frequencies. This is the same effect that is exploited in basket-woven
|
|
air core inductors that were commonly used in old radio sets.
|
|
% FIXME citation on this, citation on basket weaving -> It's hard to find reliable references on that.
|
|
|
|
\section{Related Work}
|
|
|
|
\subsection{Inductive Wireless Power Transfer in Practice}
|
|
|
|
Inductive WPT has been proposed in a large number of scenarios, each of which comese with a set of
|
|
unique constraints. When WPT is used to charge an electric toothbrush, the implementation cost of the system is
|
|
critical, while efficiency and total power output are of little concern. Mechanically, in an electric toothbrush's
|
|
charging system, the position and spacing of the transmitter and receiver coils can easily be controlled down to
|
|
millimeter precision.
|
|
|
|
In contrast to this, wireless smartphone charging is a much more demanding application. Here, the total cost of the
|
|
system is only secondary, but the receiver's form factor is critical, and total power output as well as efficiency
|
|
become major objectives. At the same time, in wireless smartphone charging, position tolerances are very coarse, and the
|
|
two coils in the charging base and in the phone may be positioned more than a centimeter off-axis, with a gap of several
|
|
millimeters and potentially not even in parallel planes.
|
|
|
|
Power transfer across large distances is even more of a concern in implantable medical devices. Where a wireless phone
|
|
charger must be able to bridge distances of a few millimeters, an implantable medical device might be situated
|
|
underneath several centimeter of tissue and bones. At the same time, cost is of (almost) no concern in this medical
|
|
application, which enables the use of complex manufacturing techniques, customized electronic components and exotic
|
|
materials.
|
|
|
|
While all of the aforementioned applications transfer somewhere between a few hundred milliwatts and several watts of
|
|
power, at the other end of the spectrum there is a large body of research suggesting the use of inductive wireless power
|
|
transfer for the charging of electric vehicles (EVs). In this application, the wireless power transfer system replaces
|
|
the conventional wired charging connector, which improves the systems' user experience given the strong force required
|
|
to seat or unseat these rather large connectors, as well as the heft of the required water-cooled cables. In this
|
|
application, size is of (almost) no concern, but at several kilowatt up to dozens or even a hundred kilowatt, the
|
|
transferred power is enormous and consequentially efficiency becomes of utmost importance. When charging an EV at a
|
|
rate of 30 kW, an efficiency improvement of just $0.1\%$ corresponds to a reduction in power dissipation of 30 W.
|
|
Besides the monetary cost of the power lost this way, each small improvement enables a reduction in size of heat sinks
|
|
and other cooling components, which directly translates to a decrease in cost.
|
|
|
|
\subsection{Twisted Inductors in RFIC Design}
|
|
\subsection{Basket-Woven Air Coils}
|
|
\subsection{Air-Core Inductors for Inductive Power Transfer}
|
|
\subsection{Ferrite or Iron-Core Inductors for Inductive Power Transfer}
|
|
|
|
\section{Twisted Inductor Design}
|
|
|
|
\subsection{From Spiral to Twisted Inductor}
|
|
|
|
\subsubsection{Ohmic Resistance}
|
|
|
|
\subsubsection{Inductance}
|
|
|
|
\subsection{CAD Integration}
|
|
|
|
\section{FEM Simulation}
|
|
|
|
\subsection{Ohmic Resistance}
|
|
|
|
\subsection{Inductance}
|
|
|
|
\subsection{Parasitic Capacitance and Self-Resonant Frequency}
|
|
|
|
\subsection{Coupling}
|
|
|
|
\section{Experimental Validation}
|
|
|
|
\subsection{Inductance and Parasitic Capacitance}
|
|
|
|
\subsection{Self-Resonant Frequency}
|
|
|
|
\subsection{Coupling}
|
|
|
|
\section{Conclusion}
|
|
|
|
\section*{Availability}
|
|
This is version \texttt{\input{version.tex}\unskip} of this paper, generated on \today.
|
|
|
|
% The git repository with the
|
|
% LaTeX source for this paper as well as our data analysis and demo code can be found at:
|
|
|
|
% \center{\url{https://git.jaseg.de/nice-coils.git}}
|
|
|
|
\printbibliography[heading=bibintoc]
|
|
|
|
\end{document}
|